ASTM C1386-98
Historical Standard: ASTM C1386-98 Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units
SUPERSEDED (see Active link, below)
ASTM C1386
1. Scope
1.1 This specification covers solid nonload-bearing and load-bearing precast concrete wall units made from autoclaved aerated concrete (PAAC) is a cementitious product based on calcium silicate hydrates in which low density is attained by the inclusion of an agent resulting in macroscopic voids and is subjected to high-pressure steam curing. The precast autoclaved aerated concrete wall units are large-size solid rectangular prisms, which are to be laid using thin-bed mortar. Installed units covered by this specification shall be protected against direct exposure to moisture using a coating material accepted by the PAAC manufacturer.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C22/C22M Specification for Gypsum
C33 Specification for Concrete Aggregates
C144 Specification for Aggregate for Masonry Mortar
C150 Specification for Portland Cement
C332 Specification for Lightweight Aggregates for Insulating Concrete
C595 Specification for Blended Hydraulic Cements
C618 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
E4 Practices for Force Verification of Testing Machines
Keywords
AAC; compressive strength; density; moisture content; precast autoclaved aerated concrete; shrinkage;
ICS Code
ICS Number Code 91.100.30 (Concrete and concrete products)
DOI: 10.1520/C1386-98
ASTM International is a member of CrossRef.