Already a subscriber?
MADCAD.com Free Trial
Sign up for a 3 day free trial to explore the MADCAD.com interface, PLUS access the
2009 International Building Code to see how it all works.
If you like to setup a quick demo, let us know at support@madcad.com
or +1 800.798.9296 and we will be happy to schedule a webinar for you.
Security check
Please login to your personal account to use this feature.
Please login to your authorized staff account to use this feature.
Are you sure you want to empty the cart?
ASME B5.50 - 2015: 7/24 Taper Tool to Spindle Connection for Automatic Tool Change, 2015
- CONTENTS
- FOREWORD
- COMMITTEE ROSTER
- CORRESPONDENCE WITH THE B5 COMMITTEE
- 1 GENERAL [Go to Page]
- 1.1 Scope
- 1.2 Noninterchangeability
- 1.3 Classification
- 1.4 Definitions
- 1.5 References [Go to Page]
- 1.5.1
- 1.5.2
- 2 ESSENTIAL DIMENSIONS FOR 7/24 TAPER TOOLHOLDER SHANK
- 3 ESSENTIAL DIMENSIONS FOR RETENTION KNOBS
- 4 ESSENTIAL DIMENSIONS FOR 7/24 TAPER SPINDLE SOCKETS [Go to Page]
- 4.1 Dimensions
- 4.2 Optional Face-Mount Holes
- FIGURES [Go to Page]
- Fig. 1 Optional Face-Mount Holes, 7/24 Taper Spindle Socket
- Fig. B-1 Cone Diameter Tolerance Space Formed by the Cone Diameter Tolerance
- Fig. B-2 Cone
- Fig. B-3 Conical Workpiece, External Cone
- Fig. B-4 Conical Workpiece, Internal Cone
- Fig. B-5 General Definitions
- Fig. B-6 Basic Cone
- Fig. B-7 Actual Cone
- Fig. B-8 Limit Cones, Cone Diameter, Tolerance Zone, and Straightness of the Generator Tolerance Zone
- Fig. B-9 Angles on Cones
- Fig. B-10 Limit Cone Angles
- Fig. B-11 Admissible Limit Cone Angles Resulting From the Cone Diameter Tolerance
- Fig. B-12 Cone Diameter Tolerance Zone and Roundness Tolerance Zone
- Fig. B-13 Cone Section Diameter Tolerance, TDS, and Cone Angle Tolerance, AT
- Fig. B-14 Actual Cone Angles
- Fig. B-15 Position of the Cone Angle Within the Cone Diameter Tolerance Zone
- Fig. B-16 Admissible Cone Form Deviation Resulting From the Cone Diameter Tolerance
- Fig. B-17 Variation of ATD Within a Range of Cone Length With the Limits of the Length Range,L1 and L2
- Fig. B-18 Cone Angle Tolerance, AT� , of a Cone Defined by Its Measuring Diameter and the LongitudinalDimensions of Which Are Defined Themselves From the Position of the Measuring Plane
- Tables [Go to Page]
- Table 1 Essential Dimensions of Basic Toolholder Shanks for Machining Centers With Automatic Tool Changers
- Table 2 Essential Dimensions of Retention Knobs
- Table 3 Essential Dimensions of 7/24 Taper Spindle Socket
- Table B-1 Table of Cone Angle Tolerances
- NONMANDATORY APPENDIX A USEFUL TECHNICAL INFORMATION [Go to Page]
- A-1 GENERAL [Go to Page]
- Table A-1 Nominal Operational Values for 7/24 Taper Toolholder Shanks
- A-2 DRAWBAR FORCES
- A-3 BALANCE REQUIREMENTS
- A-4 REFERENCES AND INFORMATION [Go to Page]
- A-4.1 Care of the Tool-to-Spindle Connection [Go to Page]
- A-4.1.1 Spindle.
- A-4.1.2 Toolholder Care.
- A-4.1.3 Drawbar Care.
- A-4.1.4 Tool Magazine.
- NONMANDATORY APPENDIX B EXCERPT FROM ISO 1947:1973, SYSTEM OF CONE TOLERANCES FOR CONICAL WORKPIECES FROM C = 1:3 TO 1:500 AND LENGTHS FROM 6 TO 630 mm [Go to Page]
- B-1 SCOPE AND FIELD OF APPLICATION
- B-2 BASIS OF THE SYSTEM [Go to Page]
- B-2.1 Types of Cone Tolerance
- B-2.2 Cone Diameter Tolerance, Cone Angle Tolerance, and Cone Form Tolerance
- B-2.3 Cone Section Diameter Tolerance
- B-3 DEFINITIONS [Go to Page]
- B-3.1 Definitions Relating to Geometry of Cones
- B-3.2 Definitions Relating to Sizes on Cones
- B-3.3 Definitions Relating to Cone Tolerances
- B-3.4 Definitions Relating to Actual Cone Angles
- B-3.5 Definition Relating to Cone Tolerance Space
- B-3.6 Definitions Relating to Cone Tolerance Zones
- B-4 CONE DIAMETER TOLERANCE, TD
- B-5 CONE ANGLE TOLERANCE, AT [Go to Page]
- B-5.1 Cone Angle Tolerance Resulting From the Cone Diameter Tolerance, TD
- B-5.2 Fixed Cone Angle Tolerance
- B-6 CONE FORM TOLERANCES, TF
- B-7 CONE SECTION DIAMETER TOLERANCE, TDS
- B-8 TABLE OF CONE ANGLE TOLERANCES [Go to Page]