Already a subscriber?
MADCAD.com Free Trial
Sign up for a 3 day free trial to explore the MADCAD.com interface, PLUS access the
2009 International Building Code to see how it all works.
If you like to setup a quick demo, let us know at support@madcad.com
or +1 800.798.9296 and we will be happy to schedule a webinar for you.
Security check
Please login to your personal account to use this feature.
Please login to your authorized staff account to use this feature.
Are you sure you want to empty the cart?
PD IEC TS 62791:2022 Ultrasonics. Pulse-echo scanners. Low-echo sphere phantoms and method for performance testing of grey-scale medical ultrasound scanners applicable to a broad range of transducer types, 2022
- undefined
- CONTENTS
- FOREWORD
- INTRODUCTION
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbols
- 5 General and environmental conditions
- 6 Equipment required [Go to Page]
- 6.1 General
- 6.2 Phantom geometries [Go to Page]
- 6.2.1 Low-contrast phantoms for assessing the ability to delineate tumour boundaries
- 6.2.2 High-contrast phantoms to evaluate scanner performance, tune scanner pre-sets, and detect defects in probes
- 6.2.3 Total internal reflection surfaces
- 6.2.4 Spatially random distribution of low-echo spheres
- 6.3 Ultrasonic properties of the tissue-mimicking (TM) phantoms
- 7 Data acquisition assuming a spatially random distribution of low-echo spheres [Go to Page]
- 7.1 Methodology [Go to Page]
- 7.1.1 General
- 7.1.2 Mechanical translation
- 7.1.3 Manual translation with cine-loop recording
- 7.2 Storage of digitized image data
- Figures [Go to Page]
- Figure 1 – Flow chart
- 7.3 Digital image files available from the scanner itself
- 7.4 Image archiving systems
- 8 Automated data analysis for quantifying low-echo sphere detectability [Go to Page]
- 8.1 General
- 8.2 Computation of mean pixel values (MPVs)
- Figure 2 – Schematic of the image plane nearest to the nth low-echo sphere and not influenced by the presence of an image boundary
- Figure 3 – Modification of Figure 2 showing a vertical image boundary (solid line) and a parallel dashed line, between which (MPV)ijk values are excluded from computation of SmBn or σBn in Formula (2)
- Figure 4 – Limiting case of Figure 3 where the vertical image boundaryis tangent to the imaged low-echo sphere
- Figure 5 – Modification of Figure 2 showing a 45° sector image boundary (solid line) and a parallel dashed line, between which (MPV)ijk values are excluded from computation of SmBn or σBn in Formula (2)
- 8.3 Additional restrictions for sector images [Go to Page]
- 8.3.1 Convex arrays
- Figure 6 – Limiting case of Figure 5 where the 45° sector imageboundary is tangent to the imaged low-echo sphere [Go to Page]
- 8.3.2 Phased arrays
- 8.4 Determination of the LSNRm-value for a given depth interval [Go to Page]
- 8.4.1 Preliminaries
- 8.4.2 Computation of LSNRmd for depth interval label d
- 8.4.3 Standard error corresponding to each LSNRmd-value
- 9 Visual assessments of images [Go to Page]
- 9.1 Image comparisons
- 9.2 Semi-quantitative image analysis
- Figure 7 – Usefulness of simple visual inspection of imagesof a standardized lowecho sphere phantom
- Figure 8 – Zones over which at least half of the spheres appear clearly outlined as a nearly full-size circle and are free of echoes (Zone 1) or an average of more than one sphere per slice can be discerned (Zone 2)
- Annex A (informative)Example of a phantom for performance testingin the 1 MHz to 7 MHz frequency range [Go to Page]
- Figure A.1 – End view of the phantom applicable for 1 MHz to 7 MHz showing the spatially random distribution of 3,2-mm-diameter, −6 dB spheres
- Figure A.2 – Top view of phantom with 3,2-mm-diameter, −6 dB spheres
- Annex B (informative)Illustrations of the computation of LSNRmd-valuesas a function of depth [Go to Page]
- Figure B.1 – Convex-array image of a prototype 4-mm-diameter,−20 dB sphere phantom for use in the 1 MHz to 7 MHz frequency range
- Figure B.2 – Auxiliary figures relating to Figure B.1
- Figure B.3 – Results corresponding to Figure B.1 and Figure B.2,demonstrating reproducibility
- Figure B.4 – Results corresponding to Figure B.1, Figure B.2 and Figure B.3
- Figure B.5 – One of 80 parallel, linear-array images of the phantom containing 4mmdiameter, −20 dB spheres, imaged at 4 MHz with the transmit focus at 3 cm depth
- Figure B.6 – Three successive images of the set of 80 frames addressed in Figure B.5, where imaging planes were separated by D/4 equal to 1 mm
- Figure B.7 – Results for the 4-cm-wide, 3-cm-focus, linear array addressedin Figure B.5 and Figure B.6 using all 80 image frames in two sets
- Figure B.8 – Results for the 4-cm-wide, 3-cm-focus, linear array addressedin Figure B.5, Figure B.6 and Figure B.7, using all 80 image framescorresponding to Figure B.7 in one set
- Annex C (informative)Sufficient number of data images to assurereproducibility of results [Go to Page]
- C.1 General
- C.2 Phantom with 3,2-mm-diameter, −20 dB low-echo sphere, having two spheres per millilitre
- Figure C.1 – One image obtained from a phantom containing 3,2-mm-diameter,−20 dB spheres by using a 4 MHz linear array focused at 3 cm depth
- Figure C.2 – Reproducibility result for two independent sets of 70 images with a mean number of low-echo sphere centres that is about 15 per 5 mm-depth interval
- Figure C.3 – Results obtained by combining both sets of 70 independentimages corresponding to Figure C.2 into a single, 140-image set
- Figure C.4 – Sector image (curved array) at 4,5 MHz with multiple transmit foci at 4 cm,8 cm and 12 cm depths; the −20 dB spheres are 3,2 mm in diameter
- Figure C.5 – Reproducibility results for a multiple transmit-focus(4 cm, 8 cm and 12 cm) case corresponding to Figure C.4
- Figure C.6 – Reproducibility results for the case corresponding to Figure C.5,except that there is a single focus at a 10 cm depth
- Figure C.7 – Reproducibility results for the case corresponding to Figure C.5,except that there is a single transmit focus at 4 cm depth
- C.3 Phantom with 2-mm-diameter, −20 dB spheres and eight spheres per millilitre
- Figure C.8 – Image of a phantom containing 2-mm-diameter, −20 dB spheres, made with a curved array having a 1,5 cm radius of curvature, with its transmit focus at 3 cm depth
- Figure C.9 – Reproducibility results corresponding to Figure C.8
- Figure C.10 – Results using all 100 images in the image set that gave rise to Figure C.9
- Figure C.11 – Image of a phantom containing 2-mm-diameter, −20 dB spheres, made with a high-frequency (15 MHz) linear array and a transmit focus of 4 cm depth
- Figure C.12 – Reproducibility results corresponding to Figure C.11
- Figure C.13 – Results using all 200 images in the image set that gave rise to Figure C.12
- Annex D (informative)Example of a phantom for performance testingin the 7 MHz to 23 MHz frequency range [Go to Page]
- Figure D.1 – End- and top-view diagrams of the phantom containing 2-mm-diameter, low-echo spheres with a backscatter level −20 dB relative to the background,for use in the 7 MHz to 23 MHz frequency range
- Figure D.2 – Image of the phantom containing 2-mm-diameter, −20 dB spheres [7], [8] obtained with a paediatric transducer with a radius of curvature of about 1,5 cm
- Annex E (informative)Determination of low-echo sphere positionsto within D/8 in x-, y- and z-Cartesian coordinates [Go to Page]
- E.1 Procedure
- Figure E.1 – Diagram discussed in the second paragraph of 3)
- E.2 Argument for the choice of seven MPV nearest-neighbour sites for determining the centres of low-echo spheres
- Annex F (informative)Tests of total internal reflection produced by aluminaand plate-glass, plane reflectors [Go to Page]
- Figure F.1 – Average of 10 images obtained by using a phased array transducer
- Figure F.2 – Mean and standard deviation of pixel value plotted against depthfrom the two rectangular regions seen in Figure F.1
- Figure F.3 – Same as Figure F.2, but for data obtained after the transducer was rotated 180°, so the plate-glass reflector appeared on the right side of the image
- Figure F.4 – The percentage by which the mean pixel values resulting from reflections differ from the mean pixel values not involving reflections plotted against depth
- Figure F.5 – Image obtained using a wide-sector (153°),1 cm radius-of-curvature transducer
- Figure F.6 – Mean pixel value and its standard deviation plottedagainst depth from the two rectangular regions in Figure F.5
- Figure F.7 – Same as Figure F.6, only the transducer was rotated 180°,so the alumina reflector was on the right side of the B-mode image
- Figure F.8 – The percentage by which the mean pixel values resulting from reflections differ from the mean pixel values not involving reflections
- Annex G (informative)Results of a test of reproducibility of LSNRmd as a function of depthfor a phantom with 4-mm-diameter, −20 dB spheres,having two spheres per millilitre [Go to Page]
- Figure G.1 – Example image of the phantom, taken with a 4,2 MHz curved array
- Figure G.2 – Reproducibility results corresponding to the two 40-image data subsets,one of which is shown in Figure G.1
- Annex H (informative)Results for low-echo sphere concentration dependence of LSNRmdas a function of depth for phantoms with 3,2-mm-diameter,−20 dB spheres [Go to Page]
- Figure H.1 – Example of an image from the 75-image, 4 ml−1 dataset producing the results shown in Figure H.2
- Figure H.2 – Results for the phantom containing four3,2-mm-diameter, −20 dB low-echo spheres per millilitre
- Figure H.3 – Example of an image from the 140-image, two spheresper millilitre data set producing the results shown in Figure H.4
- Figure H.4 – Results for the phantom containing two3,2-mm-diameter, −20 dB low-echo spheres per millilitre
- Figure H.5 – Example of an image from the 180-image, one sphereper millilitre data set producing the results shown in Figure H.6
- Figure H.6 – Results for the phantom containing one3,2-mm-diameter, −20 dB low-echo sphere per millilitre
- Annex I (informative)Comparison of two different makes of scannerwith similar transducers and console settings [Go to Page]
- Figure I.1 – Results for System A scanner and 7CF2 3-D (swept convex array) transducer focused at 4 cm depth and operated at 4,5 MHz in 2-D mode
- Figure I.2 – Results for System B scanner with a 4DC7-3 3-D (convex array) transducer focused at 4 cm depth and operated at 4 MHz in 2-D mode
- Annex J (informative)Special considerations for 3-D probes [Go to Page]
- J.1 3-D probes operating in 2-D imaging mode
- J.2 2-D arrays operating in 3-D imaging mode for determining LSNRmd-values as a function of depth for reconstructed images
- J.3 Mechanically driven 3-D probes operating in 3-D imaging mode
- Bibliography [Go to Page]