Security check
Please login to your personal account to use this feature.
Please login to your authorized staff account to use this feature.
Are you sure you want to empty the cart?
The Facilities Standards for the Public Buildings Service (P100), 2010
- 1 General Requirements [Go to Page]
- 1.1 Purpose of the Facilities Standards
- 1.2 Deviations from the P100
- 1.3 Application of the P100
- 1.4 Federal Laws, Regulations, and Standards
- 1.5 Nationally Recognized Codes and Standards
- 1.6 State and Local Codes
- 1.7 Program-Specific Guides and Standards
- 1.8 Sustainability
- 1.9 Energy Use Targets
- 1.10 Health and Safety
- 1.11 Design for Physical Security
- 1.12 Methodologies
- 2 Site Engineering and Landscape Design [Go to Page]
- 2.1 Goals and Objectives
- 2.2 GSA Programmatic Requirements
- 2.3 Site Analysis
- 2.4 Site Planning
- 2.5 Physical Security
- 2.6 Grading
- 2.7 Site Utilities
- 2.8 Site Circulation Design
- 2.9 Pavements and Curbs
- 2.10 Sustainable Landscape Design
- 2.11 Planting Practices
- 2.12 Site Lighting
- 2.13 Site Furniture
- 2.14 Site Signage
- 2.15 Flagpoles
- 3 Architecture and Interior Design [Go to Page]
- 3.1 Goals and Objectives
- 3.2 Codes, Standards, and Guidelines
- 3.3 Site Design
- 3.4 Facility Planning
- 3.5 Interior Design and Planning
- 3.6 Child Care Centers
- 3.7 Tenant Spaces
- 3.8 Building Support Spaces
- 3.9 Systems Support Spaces
- 3.10 Specialty Areas
- 3.11 Daylight and View
- 3.12 Lighting
- 3.13 Acoustics
- 3.14 Exterior Building Elements
- 3.15 Interior Facility Elements
- 3.16 Interior Finishes
- 3.17 Artwork
- 3.18 Signage
- 3.19 Alterations in Existing Buildings and Historic Structures
- 4 Structural Engineering [Go to Page]
- 4.1 Goals and Objectives
- 4.2 References
- 4.3 Alterations in Existing Buildings and Historic Structures
- 4.4 Design Standards
- 4.5 Structural Systems
- 4.6 Progressive Collapse
- 4.7 Building Materials
- 4.8 Building Elements
- 4.9 Structural Loads
- 4.10 Geotechnical Considerations
- 4.11 Seismic Safety Standards
- 4.12 General Design Considerations for Seismic Upgrading
- 4.13 Use of Recycled Materials
- 5 Mechanical Engineering [Go to Page]
- 5.1 Goals and Objectives
- 5.2 Codes, Standards, and Guidelines
- 5.3 HVAC Performance Characteristics
- 5.4 Design Criteria
- 5.5 HVAC Systems
- 5.6 Special Area HVAC Systems
- 5.7 Mechanical and Service Space Requirements
- 5.8 HVAC Components
- 5.9 Air Distribution
- 5.10 Humidification
- 5.11 Water Treatment
- 5.12 Primary Heating Systems
- 5.13 Primary Cooling Systems
- 5.14 Piping Systems
- 5.15 Thermal Insulation
- 5.16 Vibration Isolation, Acoustical Isolation, and Seismic Design
- 5.17 Meters, Gauges, and Flow Measuring Devices
- 5.18 Building Automation Systems (BAS)
- 5.19 Testing and Balancing
- 5.20 Plumbing Systems
- 5.21 Alterations in Existing Buildings and Historic Structures
- P100_Ch5_508 p136.pdf [Go to Page]
- 5.1 Goals and Objectives
- 5.2 Codes, Standards, and Guidelines
- 5.3 Design Criteria
- 5.4 HVAC Baseline System
- 5.6 Special Area HVAC Systems
- 5.7 Mechanical and Service Space Requirements
- 5.8 HVAC Components
- 5.9 Air Distribution
- 5.10 Humidification
- 5.11 Water Treatment
- 5.12 Primary Heating Systems
- 5.13 Primary Cooling Systems
- 5.14 Piping Systems
- 5.15 Thermal Insulation
- 5.16 Vibration Isolation, Acoustical Isolation, and Seismic Design
- 5.17 Meters, Gauges, and Flow Measuring Devices
- 5.18 Building Automation Systems (BAS)
- 5.19 Testing and Balancing
- 5.20 Plumbing Systems
- 5.21 Alterations in Existing Buildings and Historic Structures
- 6 Electrical Engineering [Go to Page]
- 6.1 Goals and Objectives
- 6.2 Codes, Standards, and Guidelines
- 6.3 Design Criteria
- 6.4 Utility Coordination
- 6.5 Distribution System Alternatives
- 6.6 Space Conditions
- 6.7 Secondary Branch Power Distribution
- 6.8 Interior Lighting Technologies and Controls
- 6.9 Exterior Lighting and Control Systems
- 6.10 Branch Wiring Distribution Systems
- 6.11 Voice and Data Distribution System
- 6.12 Emergency and Standby Power Systems
- 6.13 Clean Power Systems
- 6.14 Grounding Systems
- 6.15 Safety Systems, Equipment, and Personal Protection
- 6.16 Alterations in Existing Buildings and Historic Structures
- 6.17 Lighting Design Criteria for Specific Areas
- 6.18 Photovoltaic Systems
- 7 Fire Protection and LIfe Safety [Go to Page]
- 7.1 Goals and Objectives
- 7.2 References
- 7.3 General Design Requirements
- 7.4 Means of Egress
- 7.5 Interior Finishes
- 7.6 Fire Alarm and Emergency Communication Systems
- 7.7 Water Supply for Fire Protection
- 7.8 Automatic Sprinkler and Standpipe Systems
- 7.9 Non-Water-Based Fire Extinguishing Systems
- 7.10 Elevator Systems
- 7.11 Special Fire Protection Requirements
- 7.12 Required Design Guides and Manuals
- 7.13 ISC Physical Security Criteria for Federal Facilities
- 7.14 Historic Structures
- 7.15 Mass Notification Systems
- 7.16 Performance-Based Design
- 7.17 Commissioning Fire Protection and Life Safety Systems
- 8 Design Standards for U.S. Court Facilities [Go to Page]
- 8.1 Goals and Objectives
- 8.2 General Requirements
- 8.3 Architectural and Interior Design
- 8.4 Structural Systems
- 8.5 Mechanical Systems
- 8.6 Fire Protection and Security Systems
- 8.7 Electrical Systems
- 8.8 Security Design: Agency Responsibilities
- Appendix [Go to Page]
- A.1 General Requirements
- A.2 Performance Expectations Matrices
- A.3 New Construction and Modernization
- A.4 Alteration Projects
- A.5 Surveys and Geotechnical Reports
- A.6 Energy Analysis Input and Output
- B.1 References
- B.2 Acronyms and Abbreviations [Go to Page]
