1997,ASTM,"D1494-97 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2001,ASTM,"D1494-97(2001) Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2001,ASTM,"D2310-01 Standard Classification for Machine-Made ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2006,ASTM,"D2310-06 Standard Classification for Machine-Made ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
1997,ASTM,"D2310-97 Standard Classification for Machine-Made ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2000,ASTM,"D2517-00 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2005,ASTM,"D2517-05 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2006,ASTM,"D2517-06 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2006,ASTM,"D2992-06 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2000,ASTM,"D2996-00 Standard Specification for Filament-Wound ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D2996-01 Standard Specification for Filament-Wound ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
1995,ASTM,"D2996-95 Standard Specification for Filament-Wound ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D2997-01 Standard Specification for Centrifugally Cast ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
1999,ASTM,"D2997-99 Standard Specification for Centrifugally Cast ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D3262-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
2003,ASTM,"D3262-03 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
2004,ASTM,"D3262-04 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
2006,ASTM,"D3262-06 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
1996,ASTM,"D3262-96 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
2000,ASTM,"D3299-00 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2008,ASTM,"D3299-08 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2001,ASTM,"D3517-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
2003,ASTM,"D3517-03 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
2004,ASTM,"D3517-04 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
2006,ASTM,"D3517-06 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
1996,ASTM,"D3517-96 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
1997,ASTM,"D3678-97 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions"
2001,ASTM,"D3678-97(2001) Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions"
2001,ASTM,"D3679-01 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2001,ASTM,"D3679-01a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2001,ASTM,"D3679-01b Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2001,ASTM,"D3679-01c Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2002,ASTM,"D3679-02 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2002,ASTM,"D3679-02a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2003,ASTM,"D3679-03 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2004,ASTM,"D3679-04 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2004,ASTM,"D3679-04a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2005,ASTM,"D3679-05 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2006,ASTM,"D3679-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2006,ASTM,"D3679-06a Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2008,ASTM,"D3679-08 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2009,ASTM,"D3679-09 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
1999,ASTM,"D3679-99 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2005,ASTM,"D3753-05 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells"
1999,ASTM,"D3753-99 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells"
2001,ASTM,"D3754-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
2003,ASTM,"D3754-03 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
2004,ASTM,"D3754-04 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
2006,ASTM,"D3754-06 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
1996,ASTM,"D3754-96 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
2002,ASTM,"D3839-02 Standard Guide for Underground Installation of ""Fiberglass"" (Glass-FiberReinforced Thermosetting-Resin) Pipe"
2008,ASTM,"D3839-08 Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe"
1994,ASTM,"D3839-94a Standard Practice for Underground Installation of ""Fiberglass"" (Glass-Fiber- Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D3840-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications"
2005,ASTM,"D3840-01(2005) Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications"
1999,ASTM,"D3840-99 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications"
1997,ASTM,"D3841-97 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels"
2001,ASTM,"D3841-97(2001) Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels"
2001,ASTM,"D4068-01 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane"
1999,ASTM,"D4068-99 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane"
2001,ASTM,"D4097-01 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
1996,ASTM,"D4161-96 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals"
2000,ASTM,"D4226-00 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products"
2005,ASTM,"D4226-05 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products"
2000,ASTM,"D4397-00 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2002,ASTM,"D4397-02 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2008,ASTM,"D4397-08 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2004,ASTM,"D4477-04 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2004,ASTM,"D4477-04a Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2008,ASTM,"D4477-08 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
1996,ASTM,"D4477-96a Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
1996,ASTM,"D4551-96 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane"
2002,ASTM,"D4673-02 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials"
2008,ASTM,"D4673-02(2008) Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials"
2000,ASTM,"D4726-00 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors"
2001,ASTM,"D4726-01 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors"
2002,ASTM,"D4726-02 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors"
2002,ASTM,"D4756-02 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit"
2002,ASTM,"D4756-02a Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit"
2003,ASTM,"D4756-03 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit"
2006,ASTM,"D4756-06 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit"
1996,ASTM,"D4756-96 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit"
2001,ASTM,"D4802-01 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2002,ASTM,"D4802-02 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
1994,ASTM,"D4802-94 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2000,ASTM,"D4976-00b Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2002,ASTM,"D4976-02 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2004,ASTM,"D4976-04 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2004,ASTM,"D4976-04a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2006,ASTM,"D4976-06 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2006,ASTM,"D5206-06a Standard Test Method for Windload Resistance of Rigid Plastic Siding"
1996,ASTM,"D5206-96 Standard Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding"
2004,ASTM,"D5420-04 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)"
1998,ASTM,"D5420-98a Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)"
2000,ASTM,"D5421-00 Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2005,ASTM,"D5421-05 Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
1993,ASTM,"D5421-93 Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2001,ASTM,"D5685-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings"
2002,ASTM,"D5685-02 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings"
2005,ASTM,"D5685-05 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings"
1995,ASTM,"D5685-95 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings"
2001,ASTM,"D5926-01 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
2004,ASTM,"D5926-04 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
1996,ASTM,"D5926-96 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
1997,ASTM,"D6098-97 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)"
2003,ASTM,"D6098-97(2003) Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)"
2003,ASTM,"D6108-03 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes"
1997,ASTM,"D6108-97 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes"
2003,ASTM,"D6109-03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber"
2005,ASTM,"D6109-05 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products"
2002,ASTM,"D6110-02 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2005,ASTM,"D6110-05 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2005,ASTM,"D6110-05a Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2006,ASTM,"D6110-06 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2008,ASTM,"D6110-08 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
1997,ASTM,"D6110-97 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2003,ASTM,"D6111-03 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement"
1997,ASTM,"D6111-97 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement"
2001,ASTM,"D6662-01 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards"
2006,ASTM,"D6662-06 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards"
2007,ASTM,"D6662-07 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards"
2009,ASTM,"D4397-09 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2009,ASTM,"D4726-09 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors"
2009,ASTM,"D5926-09 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
2009,ASTM,"D6108-09 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes"
2009,ASTM,"D6111-09 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement"
2009,ASTM,"D6662-09 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards"
2009,ASTM,"C582-09 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment"
2006,ASTM,"D2924-01(2006) Standard Test Method for External Pressure Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2006,ASTM,"D3567-97(2006) Standard Practice for Determining Dimensions of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings"
2006,ASTM,"D3681-06 Standard Test Method for Chemical Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition"
2009,ASTM,"D3892-93(2009) Standard Practice for Packaging/Packing of Plastics"
2008,ASTM,"D3982-08  Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts"
2005,ASTM,"D4020-05 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2005,ASTM,"D4024-05 Standard Specification for Machine Made ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2007,ASTM,"D4167-97(2007) Standard Specification for  Fiber-Reinforced Plastic Fans and Blowers"
2005,ASTM,"D4329-05 Standard Practice for Fluorescent UV Exposure of Plastics"
2004,ASTM,"D4349-96(2004) Classification System for Polyphenylene Ether (PPE) Materials"
2005,ASTM,"D4364-05 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight"
2007,ASTM,"D4398-07 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure"
2008,ASTM,"D4440-08 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology"
2007,ASTM,"D4443-07 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2006,ASTM,"D4459-06 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2008,ASTM,"D4473-08 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
2008,ASTM,"D4475-02(2008) Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method"
2009,ASTM,"D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
2005,ASTM,"D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight"
2007,ASTM,"D4526-96(2007) Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography"
2003,ASTM,"D4549-03 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)"
2007,ASTM,"D4591-07 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
2003,ASTM,"D4603-03 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer"
2004,ASTM,"D4634-04 Standard Specification for Styrene-Maleic Anhydride Materials (S/MA)"
2009,ASTM,"D4659-09 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates"
2009,ASTM,"D4661-09 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates"
2008,ASTM,"D4662-08  Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols"
2007,ASTM,"D4669-07 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols"
2007,ASTM,"D4670-07 Standard Test Method for Polyurethane Raw Materials  Determination of Suspended Matter In Polyols"
2002,ASTM,"D4674-02a Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments"
2008,ASTM,"D4745-08 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2003,ASTM,"D4754-98(2003) Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell"
2008,ASTM,"D4801-08 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater"
2009,ASTM,"D4804-09 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics"
2008,ASTM,"D4878-08 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
2008,ASTM,"D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique"
2004,ASTM,"D4889-04 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates"
2006,ASTM,"D4890-06 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols"
2007,ASTM,"D4969-07 Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric"
2006,ASTM,"D5026-06 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2009,ASTM,"D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
2009,ASTM,"D5047-09 Standard Specification for Polyethylene Terephthalate Film and Sheeting"
2009,ASTM,"D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame"
2006,ASTM,"D5071-06 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus"
2009,ASTM,"D5117-09 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock"
2004,ASTM,"D5132-04 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles"
2006,ASTM,"D5138-06 Standard Classification System for Liquid Crystal Polymers (LCP)"
2007,ASTM,"D5203-07 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources"
2006,ASTM,"D5204-06 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2003,ASTM,"D5205-96(2003) Standard Classification System for Polyetherimide (PEI) Materials"
2009,ASTM,"D5207-09 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials"
2009,ASTM,"D5208-09 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics"
2007,ASTM,"D5210-92(2007) Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge"
2006,ASTM,"D5224-00(2006) Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds"
2009,ASTM,"D5225-09 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer"
2004,ASTM,"D5260-04 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
2008,ASTM,"D5279-08 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion"
2005,ASTM,"D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography"
2009,ASTM,"D5336-09 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials"
2003,ASTM,"D5338-98(2003) Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions"
2006,ASTM,"D5365-06 Standard Test Method for Long-Term Ring-Bending Strain of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2007,ASTM,"D5418-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)"
2009,ASTM,"D5422-09 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer"
2008,ASTM,"D5436-03(2008) Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
2008,ASTM,"D5491-08 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials"
2002,ASTM,"D5511-02 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions"
2004,ASTM,"D5523-04 Standard Test Method for Polyurethane Raw Materials  Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates"
2002,ASTM,"D5526-94(2002) Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions"
2007,ASTM,"D5575-07 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers"
2006,ASTM,"D5576-00(2006) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)"
2004,ASTM,"D5594-98(2004) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)"
2005,ASTM,"D5629-05 Standard Test Method for Polyurethane Raw Materials  Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers"
2006,ASTM,"D5630-06 Standard Test Method for Ash Content in Plastics"
2009,ASTM,"D5672-09 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique"
2004,ASTM,"D5675-04 Standard Specification for Fluoropolymer Micropowders"
2005,ASTM,"D5677-05 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines"
2009,ASTM,"D5740-09 Standard Guide for Writing Material Standards in the Classification D4000 Format"
2007,ASTM,"D5748-95(2007) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film"
2008,ASTM,"D5813-04(2008) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems"
2002,ASTM,"D5814-02 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test"
2009,ASTM,"D5857-09 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2003,ASTM,"D5870-95(2003) Standard Practice for Calculating Property Retention Index of Plastics"
2009,ASTM,"D5927-09 Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods"
2009,ASTM,"D5930-09 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique"
2009,ASTM,"D5946-09 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements"
2006,ASTM,"D5947-06 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens"
2003,ASTM,"D5988-03 Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting"
2005,ASTM,"D5989-05 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)"
2009,ASTM,"D5991-09 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2006,ASTM,"D6040-06 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2009,ASTM,"D6042-09 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)"
2008,ASTM,"D6099-08 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates"
2005,ASTM,"D6100-05 Standard Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)"
2005,ASTM,"D6112-97(2005) Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes"
2005,ASTM,"D6117-97(2005) Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes"
2009,ASTM,"D6150-09 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility"
2004,ASTM,"D6247-98(2004) Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry"
2004,ASTM,"D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry"
2009,ASTM,"D6265-09 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test"
2009,ASTM,"D6287-09 Standard Practice for Cutting Film and Sheeting Test Specimens"
2009,ASTM,"D6288-09 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
2008,ASTM,"D6289-08 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics"
2005,ASTM,"D6290-05 Standard Test Method for Color Determination of Plastic Pellets"
2005,ASTM,"D6339-05 Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)"
2007,ASTM,"D6340-98(2007) Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment"
2005,ASTM,"D6341-98(2005) Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140°F (-34.4 and 60°C)"
2008,ASTM,"D6342-08 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy"
2006,ASTM,"D6358-06 Standard Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods"
2007,ASTM,"D6360-07 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics"
2004,ASTM,"D6400-04 Standard Specification for Compostable Plastics"
2008,ASTM,"D6436-08 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers"
2005,ASTM,"D6437-05 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)"
2004,ASTM,"D6456-99(2004) Standard Specification for Finished Parts Made from Polyimide Resin"
2008,ASTM,"D6457-08 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)"
2006,ASTM,"D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography"
2007,ASTM,"D6576-07 Standard Specification for Flexible Cellular Rubber Chemically Blown"
2005,ASTM,"D6585-05 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2009,ASTM,"D6712-01(2009) Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes"
2009,ASTM,"D6713-01(2009) Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)"
2006,ASTM,"D6778-06 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials"
2005,ASTM,"D6783-05 Standard Specification for Polymer Concrete Pipe"
2008,ASTM,"D6835-08 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)"
2009,ASTM,"D6867-03(2009) Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing"
2008,ASTM,"D6979-08 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen"
2009,ASTM,"D6980-09 Test Method for Determination of Moisture in Plastics by Loss in Weight"
2008,ASTM,"D6988-08 Standard Guide for Determination of Thickness of Plastic Film Test Specimens"
2009,ASTM,"D7029-09 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C]"
2006,ASTM,"D7211-06 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use"
2007,ASTM,"D7309-07a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry"
2008,ASTM,"E1788-08 Standard Test Method for Acidity in Acrylonitrile"
2007,ASTM,"E1863-07 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography"
2009,ASTM,"D3679-09a Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2010,ASTM,"D4097-01(2010) Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2009,ASTM,"D4226-09 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products"
2010,ASTM,"D4441-04(2010) Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene"
2009,ASTM,"D4477-09 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2010,ASTM,"D4877-10 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates"
2009,ASTM,"D4968-09 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2010,ASTM,"D4986-10 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2010,ASTM,"D6645-01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry"
2009,ASTM,"D6691-09 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum"
2010,ASTM,"D7251-10 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products"
2010,ASTM,"D5083-10 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
2010,ASTM,"D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending"
2002,ASTM,"D6777-02 Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding"
2004,ASTM,"D6865-04 Standard Classification System for Acrylonitrile-Styrene-Acrylate (ASA) and Acrylonitrile-EPDM-Styrene (AES) Plastics and Alloys Molding and Extrusion Materials"
2003,ASTM,"D6868-03 Standard Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates"
2003,ASTM,"D6869-03 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)"
2003,ASTM,"D6953-03 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)"
2004,ASTM,"D6954-04 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation"
2004,ASTM,"D7026-04 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis"
2004,ASTM,"D7075-04 Standard Practice for Evaluating and Reporting Environmental Performance of Biobased Products"
2005,ASTM,"D7081-05 Standard Specification for Non-Floating Biodegradable Plastics in the Marine Environment"
2004,ASTM,"D7083-04 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography"
2004,ASTM,"D7107-04 Standard Test Method for Creep Measurement of Self-Lubricating Bushings"
2005,ASTM,"D7132-05 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam"
2005,ASTM,"D7133-05 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids"
2005,ASTM,"D7134-05 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)"
2010,ASTM,"D7192-10 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement  Sensors"
2005,ASTM,"D7193-05 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2005,ASTM,"D7194-05 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene"
2006,ASTM,"D7209-06 Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products"
2006,ASTM,"D7210-06 Standard Practice for Extraction of Additives in Polyolefin Plastics"
2006,ASTM,"D7252-06 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates"
2006,ASTM,"D7253-06 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols"
2007,ASTM,"D7254-07 Standard Specification for Polypropylene (PP) Siding"
2009,ASTM,"D7258-09 Standard Specification for Polymeric Piles"
2007,ASTM,"D7310-07 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors"
2009,ASTM,"D7445-09 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)"
2009,ASTM,"D7471-09 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials"
2009,ASTM,"D7472-09 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials"
2008,ASTM,"D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis"
2008,ASTM,"D7487-08 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test"
2009,ASTM,"D7567-09 Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction"
2010,ASTM,"D3299-10 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2010,ASTM,"D4000-10a Standard Classification System for  Specifying Plastic Materials"
2009,ASTM,"D4068-09 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane"
2010,ASTM,"D4226-10 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products"
2010,ASTM,"D4385-10 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
2010,ASTM,"D4508-10 Standard Test Method for Chip Impact Strength of Plastics"
2010,ASTM,"D4663-10 Standard Test Method for Polyurethane Raw Materials  Determination of Hydrolyzable Chlorine of Isocyanates"
2010,ASTM,"D4802-10 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2010,ASTM,"D4895-10 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2010,ASTM,"D5155-10 Standard Test Methods for Polyurethane Raw Materials  Determination of the Isocyanate Content of Aromatic Isocyanates"
2008,ASTM,"D5272-08 Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics"
2009,ASTM,"D5419-09 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures"
2010,ASTM,"D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)"
2010,ASTM,"D5592-94(2010) Standard Guide for Material Properties Needed in Engineering Design Using Plastics"
2010,ASTM,"D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
2010,ASTM,"D5998-10 Standard Specification for Molded Polyethylene Shipping and Storage Drums"
2010,ASTM,"D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials"
2010,ASTM,"D6109-10 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products"
2010,ASTM,"D6110-10 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2010,ASTM,"D6226-10 Standard Test Method for Open Cell Content of Rigid Cellular Plastics"
2010,ASTM,"D6261-10 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)"
2010,ASTM,"D6338-10 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods"
2010,ASTM,"D6394-10  Standard Specification for Sulfone Plastics (SP)"
2010,ASTM,"D6395-10 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics"
2010,ASTM,"D6779-10 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2010,ASTM,"D6866-10 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis"
2010,ASTM,"D7082-04(2010) Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe"
2010,ASTM,"D7191-10 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor"
2010,ASTM,"D953-10 Standard Test Method for Bearing Strength of Plastics"
2007,ASTM,"D4398-07 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure (Redline)"
2009,ASTM,"D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Redline)"
2010,ASTM,"D4508-10 Standard Test Method for Chip Impact Strength of Plastics (Redline)"
2008,ASTM,"D4801-08 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater (Redline)"
2008,ASTM,"D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique (Redline)"
2007,ASTM,"D5203-07 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources (Redline)"
2008,ASTM,"D5491-08 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials (Redline)"
2010,ASTM,"D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials (Redline)"
2010,ASTM,"D6456-10 Standard Specification for Finished Parts Made from Polyimide Resin (Redline)"
2008,ASTM,"D6457-08 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) (Redline)"
2008,ASTM,"D7474-08 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents"
2010,ASTM,"D3840-10 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications"
2010,ASTM,"D4161-01(2010) Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals"
2010,ASTM,"D4397-10 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications"
2001,ASTM,"D4551-96(2001) Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane"
1998,ASTM,"D4673-98 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials"
2010,ASTM,"D5421-05(2010) Standard Specification for Contact Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2011,ASTM,"D5685-11 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings"
2011,ASTM,"D5926-11 Standard Specification for  Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
2010,ASTM,"D6098-10 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)"
2008,ASTM,"C581-03(2008)e1 Standard Practice for  Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service"
2003,ASTM,"C581-03 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service"
2000,ASTM,"C581-00 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service"
2002,ASTM,"C582-02 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment"
1995,ASTM,"C582-95 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment"
2009,ASTM,"D953-09 Standard Test Method for Bearing Strength of Plastics"
2002,ASTM,"D953-02 Standard Test Method for Bearing Strength of Plastics"
1995,ASTM,"D953-95 Standard Test Method for Bearing Strength of Plastics"
2008,ASTM,"D1494-97(2008)e1 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2001,ASTM,"D1494-97(2001)e1 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2007,ASTM,"D2105-01(2007)e1 Standard Test Method for Longitudinal Tensile Properties of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube"
2001,ASTM,"D2105-01 Standard Test Method for Longitudinal Tensile Properties of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube"
1997,ASTM,"D2105-97 Standard Test Method for Longitudinal Tensile Properties of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube"
2010,ASTM,"D2143-00(2010) Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe"
2005,ASTM,"D2143-00(2005)e1 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe"
2000,ASTM,"D2143-00 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe"
1994,ASTM,"D2143-94 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe"
2000,ASTM,"D2517-00e1 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2003,ASTM,"E1788-96(2003) Standard Test Method for Acidity in Acrylonitrile"
1996,ASTM,"E1788-96 Standard Test Method for Acidity in Acrylonitrile"
2002,ASTM,"E1863-97(2002) Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography"
1997,ASTM,"E1863-97 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography"
2001,ASTM,"D2924-01 Standard Test Method for External Pressure Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
1999,ASTM,"D2924-99 Standard Test Method for External Pressure Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2007,ASTM,"D2925-01(2007)e1 Standard Test Method for Beam Deflection of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow"
2001,ASTM,"D2925-01 Standard Test Method for Beam Deflection of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow"
2000,ASTM,"D2925-95(2000)e1 Standard Test Method for Beam Deflection of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow"
2001,ASTM,"D2992-01 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
1996,ASTM,"D2992-96e1 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2007,ASTM,"D2996-01(2007)e1 Standard Specification for Filament-Wound ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2007,ASTM,"D2997-01(2007)e1 Standard Specification for Centrifugally Cast ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2011,ASTM,"D3262-11 Standard Specification for  “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
2011,ASTM,"D3517-11 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
2002,ASTM,"D3567-97(2002) Standard Practice for Determining Dimensions of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings"
1997,ASTM,"D3567-97 Standard Practice for Determining Dimensions of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings"
2008,ASTM,"D3678-97(2008)e1 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions"
2011,ASTM,"D3679-11 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2004,ASTM,"D3679-04ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2003,ASTM,"D3679-03e2 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2003,ASTM,"D3679-03e1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding"
2001,ASTM,"D3681-01e1 Standard Test Method for Chemical Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition"
2001,ASTM,"D3681-01 Standard Test Method for Chemical Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition"
1996,ASTM,"D3681-96 Standard Test Method for Chemical Resistance of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition"
2005,ASTM,"D3753-05e1 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells"
2011,ASTM,"D3754-11 Standard Specification for  “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
2002,ASTM,"D3839-02e1 Standard Guide for Underground Installation of ""Fiberglass"" (Glass-FiberReinforced Thermosetting-Resin) Pipe"
2008,ASTM,"D3841-97(2008)e1 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels"
2003,ASTM,"D3892-93(2003) Standard Practice for Packaging/Packing of Plastics"
1998,ASTM,"D3892-93(1998) Standard Practice for Packaging/Packing of Plastics"
2003,ASTM,"D3982-03 Standard Specification for Contact Molded ""Fiberglass"" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods"
1998,ASTM,"D3982-98 Standard Specification for Contact Molded ""Fiberglass"" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods"
2011,ASTM,"D4000-11  Standard Classification System for  Specifying Plastic Materials"
2010,ASTM,"D4000-10 Standard Classification System for  Specifying Plastic Materials"
2009,ASTM,"D4000-09b Standard Classification System for  Specifying Plastic Materials"
2009,ASTM,"D4000-09a Standard Classification System for  Specifying Plastic Materials"
2009,ASTM,"D4000-09 Standard Classification System for  Specifying Plastic Materials"
2008,ASTM,"D4000-08 Standard Classification System for  Specifying Plastic Materials"
2007,ASTM,"D4000-07 Standard Classification System for Specifying Plastic Materials"
2004,ASTM,"D4000-04e1 Standard Classification System for Specifying Plastic Materials"
2004,ASTM,"D4000-04 Standard Classification System for Specifying Plastic Materials"
2003,ASTM,"D4000-03a Standard Classification System for Specifying Plastic Materials"
2003,ASTM,"D4000-03 Standard Classification System for Specifying Plastic Materials"
2001,ASTM,"D4000-01ae1 Standard Classification System for Specifying Plastic Materials"
2001,ASTM,"D4000-01 Standard Classification System for Specifying Plastic Materials"
2000,ASTM,"D4000-00a Standard Classification System for Specifying Plastic Materials"
2000,ASTM,"D4000-00 Standard Classification System for Specifying Plastic Materials"
2011,ASTM,"D4020-11 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2001,ASTM,"D4020-01a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2001,ASTM,"D4020-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2000,ASTM,"D4020-00a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials"
2000,ASTM,"D4024-00 Standard Specification for Machine Made ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
1995,ASTM,"D4097-95ae3 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks"
2005,ASTM,"D4161-01(2005) Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals"
2001,ASTM,"D4161-01 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals"
2002,ASTM,"D4167-97(2002) Standard Specification for Fiber-Reinforced Plastic Fans and Blowers"
1997,ASTM,"D4167-97 Standard Specification for Fiber-Reinforced Plastic Fans and Blowers"
2011,ASTM,"D4226-11 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products"
1999,ASTM,"D4329-99 Standard Practice for Fluorescent UV Exposure of Plastics"
2010,ASTM,"D4349-10 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials"
1996,ASTM,"D4349-96 Standard Classification System for Polyphenylene Ether (PPE) Materials"
2002,ASTM,"D4364-02 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight"
1994,ASTM,"D4364-94 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight"
2008,ASTM,"D4385-08 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
2002,ASTM,"D4385-02 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
1995,ASTM,"D4385-95 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products"
2002,ASTM,"D4398-02 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure"
1995,ASTM,"D4398-95 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure"
2007,ASTM,"D4440-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology"
2001,ASTM,"D4440-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology"
1995,ASTM,"D4440-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology"
2004,ASTM,"D4441-04 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene"
1998,ASTM,"D4441-98 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene"
2002,ASTM,"D4443-95(2002) Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
1999,ASTM,"D4459-99 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2003,ASTM,"D4473-03 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
2001,ASTM,"D4473-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
1995,ASTM,"D4473-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior"
2002,ASTM,"D4475-02 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method"
1996,ASTM,"D4475-96 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method"
2003,ASTM,"D4476-03 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
1997,ASTM,"D4476-97 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods"
2000,ASTM,"D4495-00 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight"
2006,ASTM,"D4508-06 Standard Test Method for Chip Impact Strength of Plastics"
2005,ASTM,"D4508-05 Standard Test Method for Chip Impact Strength of Plastics"
2004,ASTM,"D4508-04a Standard Test Method for Chip Impact Strength of Plastics"
2004,ASTM,"D4508-04 Standard Test Method for Chip Impact Strength of Plastics"
1998,ASTM,"D4508-98 Standard Test Method for Chip Impact Strength of Plastics"
2001,ASTM,"D4526-96(2001)e1 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography"
1996,ASTM,"D4526-96 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography"
2011,ASTM,"D4549-11 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)"
2000,ASTM,"D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)"
2008,ASTM,"D4551-96(2008)e1 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane"
2001,ASTM,"D4591-01 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
1997,ASTM,"D4591-97 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
1996,ASTM,"D4603-96 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer"
2011,ASTM,"D4634-11a Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
2011,ASTM,"D4634-11  Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
1999,ASTM,"D4634-99 Standard Specification for Styrene-Maleic Anhydride Materials (S/MA)"
2003,ASTM,"D4659-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates"
1998,ASTM,"D4659-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Specific Gravity of Isocyanates"
2003,ASTM,"D4661-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates"
1998,ASTM,"D4661-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Total Chlorine in Isocyanates"
2011,ASTM,"D4662-08(2011)e1  Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols"
2003,ASTM,"D4662-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols"
1998,ASTM,"D4662-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Acid and Alkalinity Numbers of Polyols"
2004,ASTM,"D4663-98(2004) Standard Test Method for Polyurethane Raw Materials  Determination of Hydrolyzable Chlorine of Isocyanates"
1998,ASTM,"D4663-98 Standard Test Method for Polyurethane Raw Materials  Determination of Hydrolyzable Chlorine of Isocyanates"
2002,ASTM,"D4669-98(2002)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols"
1998,ASTM,"D4669-98 Standard Test Method for Polyurethane Raw Materials  Determination of Specific Gravity of Polyols"
2002,ASTM,"D4670-97(2002) Standard Test Method for Polyurethane Raw Materials  Determination of Suspended Matter In Polyols"
1997,ASTM,"D4670-97 Standard Test Method for Polyurethane Raw Materials  Determination of Suspended Matter In Polyols"
2010,ASTM,"D4674-02a(2010) Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments"
2002,ASTM,"D4674-02 Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight"
1997,ASTM,"D4674-89(1997) Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight"
2011,ASTM,"D4745-11 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2006,ASTM,"D4745-06 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2001,ASTM,"D4745-01 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
1997,ASTM,"D4745-97 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
1998,ASTM,"D4754-98 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell"
2007,ASTM,"D4801-07 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater"
2006,ASTM,"D4801-06 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater"
2005,ASTM,"D4801-05 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
2001,ASTM,"D4801-95(2001)e1 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
1995,ASTM,"D4801-95 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
2010,ASTM,"D4803-10 Standard Test Method for Predicting Heat Buildup in PVC Building Products"
2002,ASTM,"D4803-97(2002)e1 Standard Test Method for Predicting Heat Buildup in PVC Building Products"
1997,ASTM,"D4803-97 Standard Test Method for Predicting Heat Buildup in PVC Building Products"
2003,ASTM,"D4804-03 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics"
1998,ASTM,"D4804-98 Standard Test Methods for Determining the Flammability Characteristics of Nonrigid Solid Plastics"
2004,ASTM,"D4877-04 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates"
1998,ASTM,"D4877-98 Standard Test Method for Polyurethane Raw Materials  Determination of APHA Color in Isocyanates"
2003,ASTM,"D4878-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
1998,ASTM,"D4878-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Viscosity of Polyols"
2003,ASTM,"D4883-03 Standard Test Method for Density of Polyethylene by the Ultrasound Technique"
1999,ASTM,"D4883-99 Standard Test Method for Density of Polyethylene by the Ultrasound Technique"
2011,ASTM,"D4889-04(2011) Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates"
1998,ASTM,"D4889-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Viscosity of Crude or Modified Isocyanates"
2003,ASTM,"D4890-98(2003) Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols"
1998,ASTM,"D4890-98 Standard Test Methods for Polyurethane Raw Materials  Determination of Gardner and APHA Color of Polyols"
2004,ASTM,"D4895-04 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
1998,ASTM,"D4895-98 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2008,ASTM,"D4968-08 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2006,ASTM,"D4968-06 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2002,ASTM,"D4968-02 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2002,ASTM,"D4969-02 Standard Specification for Polytetrafluoroethylene—(PTFE) Coated Glass Fabric"
1997,ASTM,"D4969-97 Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric"
2002,ASTM,"D4976-02e1 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2003,ASTM,"D4986-03 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
1998,ASTM,"D4986-98 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2009,ASTM,"D5017-96(2009)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance"
2003,ASTM,"D5017-96(2003)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance"
1996,ASTM,"D5017-96 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance"
2001,ASTM,"D5026-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
1995,ASTM,"D5026-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2003,ASTM,"D5028-96(2003)e1 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
2003,ASTM,"D5028-96(2003) Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
1996,ASTM,"D5028-96 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis"
2007,ASTM,"D5045-99(2007)e1 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials"
1999,ASTM,"D5045-99 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials"
2005,ASTM,"D5047-05 Standard Specification for Polyethylene Terephthalate Film and Sheeting"
2003,ASTM,"D5047-95(2003) Standard Specification for Polyethylene Terephthalate Film and Sheeting"
1995,ASTM,"D5047-95 Standard Specification for Polyethylene Terephthalate Film and Sheeting"
2003,ASTM,"D5048-03 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame"
1997,ASTM,"D5048-97 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame"
1999,ASTM,"D5071-99 Standard Practice for Exposure of Photodegradable Plastics in a  Xenon Arc Apparatus"
2008,ASTM,"D5083-08 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
2002,ASTM,"D5083-02 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
1996,ASTM,"D5083-96 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens"
2003,ASTM,"D5117-03 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock"
1996,ASTM,"D5117-96 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock"
2011,ASTM,"D5132-11 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles"
2003,ASTM,"D5132-03 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles"
2002,ASTM,"D5132-02 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles"
1994,ASTM,"D5132-93(1994)e1 Standard Test Method for Horizontal Burning Rate of Flexible Cellular and Rubber Materials Used in Occupant Compartments of Motor Vehicles"
2011,ASTM,"D5138-11 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)"
1999,ASTM,"D5138-99a Standard Specification for Liquid Crystal Polymers"
2007,ASTM,"D5155-07 Standard Test Methods for Polyurethane Raw Materials  Determination of the Isocyanate Content of Aromatic Isocyanates"
2001,ASTM,"D5155-01 Standard Test Methods for Polyurethane Raw Materials  Determination of the Isocyanate Content of Aromatic Isocyanates"
1996,ASTM,"D5155-96 Standard Test Methods for Polyurethane Raw Materials  Determination of the Isocyanate Content of Aromatic Isocyanates"
2002,ASTM,"D5203-02 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources"
1998,ASTM,"D5203-98 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources"
2011,ASTM,"D5204-11 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2003,ASTM,"D5204-03 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2001,ASTM,"D5204-01 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials"
1999,ASTM,"D5204-99 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2010,ASTM,"D5205-10 Standard Classification System for Polyetherimide (PEI) Materials"
1996,ASTM,"D5205-96 Standard Classification System for Polyetherimide (PEI) Materials"
2003,ASTM,"D5207-03 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials"
1998,ASTM,"D5207-98 Standard Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials"
2001,ASTM,"D5208-01 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics"
2000,ASTM,"D5210-92(2000) Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge"
1992,ASTM,"D5210-92 Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge"
2000,ASTM,"D5224-00 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds"
2003,ASTM,"D5225-98(2003) Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer"
1998,ASTM,"D5225-98 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer"
2010,ASTM,"D5226-98(2010)e1 Standard Practice for Dissolving Polymer Materials"
2003,ASTM,"D5226-98(2003) Standard Practice for Dissolving Polymer Materials"
1998,ASTM,"D5226-98 Standard Practice for Dissolving Polymer Materials"
2008,ASTM,"D5227-01(2008)e1 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins"
2001,ASTM,"D5227-01 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins"
1995,ASTM,"D5227-95 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins"
2010,ASTM,"D5260-04(2010) Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
1997,ASTM,"D5260-97 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds"
1999,ASTM,"D5272-92(1999) Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics"
2001,ASTM,"D5279-01 Standard Test Method for Plastics:  Dynamic Mechanical Properties:  In Torsion"
1999,ASTM,"D5279-99 Standard Test Method for Plastics:  Dynamic Mechanical Properties:  In Torsion"
2011,ASTM,"D5296-11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography"
1997,ASTM,"D5296-97 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography"
2008,ASTM,"D5319-97(2008)e1 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
2001,ASTM,"D5319-97(2001) Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
1997,ASTM,"D5319-97 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
2003,ASTM,"D5336-03 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials"
2000,ASTM,"D5336-00 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials"
2011,ASTM,"D5338-11 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions. Incorporating Thermophilic Temperatures"
1998,ASTM,"D5338-98e1 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions"
2008,ASTM,"D5364-08e1 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units"
2008,ASTM,"D5364-08 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units"
1993,ASTM,"D5364-93e1 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units"
2002,ASTM,"D5364-93(2002) Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units"
2001,ASTM,"D5365-01e1 Standard Test Method for Long-Term Ring-Bending Strain of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D5365-01 Standard Test Method for Long-Term Ring-Bending Strain of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
1999,ASTM,"D5365-99 Standard Test Method for Long-Term Ring-Bending Strain of ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2001,ASTM,"D5418-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)"
1999,ASTM,"D5418-99 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)"
2003,ASTM,"D5419-95(2003) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures"
1995,ASTM,"D5419-95 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures"
2003,ASTM,"D5422-03 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer"
2003,ASTM,"D5436-03 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
1999,ASTM,"D5436-99 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
1998,ASTM,"D5491-98 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials"
2010,ASTM,"D5492-10 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics"
2003,ASTM,"D5492-98(2003)e1 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics"
2003,ASTM,"D5492-98(2003) Standard Test Method for Determination of Xylene Solubles in Propylene Plastics"
1998,ASTM,"D5492-98 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics"
2008,ASTM,"D5507-99(2008)e1 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography"
1999,ASTM,"D5507-99 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography"
2009,ASTM,"D5508-94a(2009)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)"
2001,ASTM,"D5508-94a(2001)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)"
1994,ASTM,"D5508-94a Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)"
2011,ASTM,"D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions"
2010,ASTM,"D5523-10 Standard Test Method for Polyurethane Raw Materials  Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates"
1999,ASTM,"D5523-94(1999)e1 Standard Test Method for Polyurethane Raw Materials  Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates"
2011,ASTM,"D5526-94(2011)e1 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions"
2003,ASTM,"D5575-99(2003) Standard Specification for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers"
1999,ASTM,"D5575-99 Standard Specification for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers"
2000,ASTM,"D5576-00 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectroscopy (FT-IR)"
2010,ASTM,"D5577-94(2010)e1 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics"
2003,ASTM,"D5577-94(2003) Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics"
1994,ASTM,"D5577-94 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics"
2002,ASTM,"D5592-94(2002)e1 Standard Guide for Material Properties Needed in Engineering Design Using Plastics"
1994,ASTM,"D5592-94 Standard Guide for Material Properties Needed in Engineering Design Using Plastics"
1998,ASTM,"D5594-98 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)"
2007,ASTM,"D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
2006,ASTM,"D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
2001,ASTM,"D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
1996,ASTM,"D5628-96 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)"
2011,ASTM,"D5629-11 Standard Test Method for Polyurethane Raw Materials  Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers"
2001,ASTM,"D5630-01 Standard Test Method for Ash Content in Thermoplastics"
1994,ASTM,"D5630-94 Standard Test Method for Ash Content in Thermoplastics"
2003,ASTM,"D5672-03 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique"
1995,ASTM,"D5672-95 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique"
2010,ASTM,"D5675-04(2010) Standard Specification for Fluoropolymer Micropowders"
1999,ASTM,"D5675-99a Standard Specification for Fluoropolymer Micropowders"
2010,ASTM,"D5677-05(2010) Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines"
2000,ASTM,"D5677-00 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines"
2011,ASTM,"D5740-11 Standard Guide for  Writing Material Standards in the Classification D4000 Format"
2003,ASTM,"D5740-03 Standard Guide for Writing Material Standards in the Classification D4000 Format"
1997,ASTM,"D5740-97 Standard Guide for Writing Material Standards in the Classification D4000 Format"
2001,ASTM,"D5748-95(2001) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film"
1995,ASTM,"D5748-95 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film"
2004,ASTM,"D5813-04 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems"
1995,ASTM,"D5813-95 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Pipe"
2010,ASTM,"D5814-10 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test"
1995,ASTM,"D5814-95 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test"
2010,ASTM,"D5857-10 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2008,ASTM,"D5857-08 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2007,ASTM,"D5857-07 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2005,ASTM,"D5857-05a Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2005,ASTM,"D5857-05 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2004,ASTM,"D5857-04 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2003,ASTM,"D5857-03b Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2003,ASTM,"D5857-03a Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2003,ASTM,"D5857-03 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2002,ASTM,"D5857-02e1 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2002,ASTM,"D5857-02a Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2002,ASTM,"D5857-02 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2001,ASTM,"D5857-01 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2000,ASTM,"D5857-00b Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology"
2011,ASTM,"D5870-11 Standard Practice for Calculating Property Retention Index of Plastics"
1995,ASTM,"D5870-95 Standard Practice for Calculating Property Retention Index of Plastics"
2003,ASTM,"D5927-03 Standard Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods"
2000,ASTM,"D5927-00 Standard Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods"
1999,ASTM,"D5927-99a Standard Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods"
2001,ASTM,"D5930-01 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique"
1997,ASTM,"D5930-97 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique"
2004,ASTM,"D5946-04 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements"
2001,ASTM,"D5946-01 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements"
1999,ASTM,"D5946-99 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements"
2003,ASTM,"D5947-03 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens"
2002,ASTM,"D5947-02 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens"
1996,ASTM,"D5947-96 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens"
2005,ASTM,"D5948-05e1 Standard Specification for Molding Compounds, Thermosetting"
2005,ASTM,"D5948-05 Standard Specification for Molding Compounds, Thermosetting"
2002,ASTM,"D5948-96(2002)e1 Standard Specification for Molding Compounds, Thermosetting"
1996,ASTM,"D5988-96 Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting"
2011,ASTM,"D5989-11 Standard Specification for  Extruded and Monomer Cast Shapes Made from Nylon (PA)"
1998,ASTM,"D5989-98 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)"
2002,ASTM,"D5991-96(2002) Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2003,ASTM,"D5998-03 Standard Specification for Molded Polyethylene Shipping and Storage Drums"
1996,ASTM,"D5998-96 Standard Specification for Molded Polyethylene Shipping and Storage Drums"
2001,ASTM,"D6040-01 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
1996,ASTM,"D6040-96 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2004,ASTM,"D6042-04 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)"
2002,ASTM,"D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials"
1996,ASTM,"D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials"
2003,ASTM,"D6099-03 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates"
1997,ASTM,"D6099-97 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates"
2011,ASTM,"D6100-11 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)"
2003,ASTM,"D6100-03 Standard Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)"
1997,ASTM,"D6100-97 Standard Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)"
1997,ASTM,"D6109-97e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber"
2004,ASTM,"D6110-04e1 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
1997,ASTM,"D6112-97 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes"
2010,ASTM,"D6117-10 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes"
1997,ASTM,"D6117-97 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes"
2003,ASTM,"D6150-97(2003) Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility"
1997,ASTM,"D6150-97 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility"
2005,ASTM,"D6226-05 Standard Test Method for Open Cell Content of Rigid Cellular Plastics"
1998,ASTM,"D6226-98e1 Standard Test Method for Open Cell Content of Rigid Cellular Plastics"
2010,ASTM,"D6247-10 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry"
1998,ASTM,"D6247-98 Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry"
1998,ASTM,"D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry"
2003,ASTM,"D6261-98(2003) Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)"
1998,ASTM,"D6261-98 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)"
2011,ASTM,"D6263-11 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
2003,ASTM,"D6265-98(2003) Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test"
1998,ASTM,"D6265-98 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test"
2008,ASTM,"D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending"
2002,ASTM,"D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending"
2000,ASTM,"D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending"
2005,ASTM,"D6287-05 Standard Practice for Cutting Film and Sheeting Test Specimens"
1998,ASTM,"D6287-98 Standard Practice for Cutting Film and Sheeting Test Specimens"
2003,ASTM,"D6288-98(2003) Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
1998,ASTM,"D6288-98 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
2003,ASTM,"D6289-03 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics"
1998,ASTM,"D6289-98 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics"
2005,ASTM,"D6290-05e1 Standard Test Method for Color Determination of Plastic Pellets"
1998,ASTM,"D6290-98e1 Standard Test Method for Color Determination of Plastic Pellets"
2009,ASTM,"D6338-09 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods"
2003,ASTM,"D6338-03 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizate (HCTPVs)"
1998,ASTM,"D6338-98 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizate (HCTPVs)"
2011,ASTM,"D6339-11 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)"
2011,ASTM,"D6339-11 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) (Redline)"
2004,ASTM,"D6339-04 Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)"
1998,ASTM,"D6339-98 Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)"
1998,ASTM,"D6340-98 Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment"
2010,ASTM,"D6341-10 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140°F (-34.4 and 60°C)"
1998,ASTM,"D6341-98 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140°F (-34.4 and 60°C)"
2003,ASTM,"D6342-98(2003) Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy"
1998,ASTM,"D6342-98 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy"
1999,ASTM,"D6358-99 Standard Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods"
1999,ASTM,"D6360-99 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics"
2009,ASTM,"D6394-09  Standard Specification for Sulfone Plastics (SP)"
2008,ASTM,"D6394-08  Standard Specification for Sulfone Plastics (SP)"
2007,ASTM,"D6394-07  Standard Specification for Sulfone Plastics (SP)"
2005,ASTM,"D6394-05 Standard Specification for Sulfone Plastics (SP)"
2003,ASTM,"D6394-03 Standard Specification for Sulfone Plastics (SP)"
2002,ASTM,"D6394-02 Standard Specification for Sulfone Plastics (SP)"
2001,ASTM,"D6394-01 Standard Specification for Sulfone Plastics (SP)"
1999,ASTM,"D6394-99 Standard Specification for Sulfone Plastics (SP)"
2011,ASTM,"D6395-11 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics"
2011,ASTM,"D6395-11 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics (Redline)"
2005,ASTM,"D6395-05 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics"
1999,ASTM,"D6395-99 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics"
1999,ASTM,"D6400-99e1 Standard Specification for Compostable Plastics"
2002,ASTM,"D6436-02 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers"
1999,ASTM,"D6436-99 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers"
2010,ASTM,"D6437-05(2010)e1 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)"
1999,ASTM,"D6437-99 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)"
2010,ASTM,"D6456-10 Standard Specification for Finished Parts Made from Polyimide Resin"
1999,ASTM,"D6456-99 Standard Specification for Finished Parts Made from Polyimide Resin"
2004,ASTM,"D6457-04 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)"
1999,ASTM,"D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography"
2000,ASTM,"D6576-00 Standard Specification for Flexible Cellular Rubber Chemically Blown"
2011,ASTM,"D6585-11 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2001,ASTM,"D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry"
2001,ASTM,"D6691-01 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium"
2001,ASTM,"D6712-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes"
2001,ASTM,"D6713-01 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)"
2010,ASTM,"D6777-02(2010)e1 Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding"
2005,ASTM,"D6778-05 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials"
2003,ASTM,"D6778-03 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials"
2002,ASTM,"D6778-02 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials"
2011,ASTM,"D6779-11 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2008,ASTM,"D6779-08a Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2008,ASTM,"D6779-08 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2007,ASTM,"D6779-07a Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2007,ASTM,"D6779-07 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2006,ASTM,"D6779-06e1 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2006,ASTM,"D6779-06 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2005,ASTM,"D6779-05 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2004,ASTM,"D6779-04a Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2004,ASTM,"D6779-04 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2003,ASTM,"D6779-03 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2002,ASTM,"D6779-02a Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2002,ASTM,"D6779-02 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)"
2011,ASTM,"D6783-05(2011) Standard Specification for Polymer Concrete Pipe"
2011,ASTM,"D6783-05(2011) Standard Specification for Polymer Concrete Pipe (Redline)"
2003,ASTM,"D6783-03 Standard Specification for Polymer Concrete Pipe"
2002,ASTM,"D6783-02 Standard Specification for Polymer Concrete Pipe"
2002,ASTM,"D6835-02 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)"
2011,ASTM,"D6864-11 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2011,ASTM,"D6864-11 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products (Redline)"
2010,ASTM,"D6864-10 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2003,ASTM,"D6864-03e1 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2003,ASTM,"D6864-03ae1 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2003,ASTM,"D6864-03a Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2003,ASTM,"D6864-03 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products"
2011,ASTM,"D6866-11  Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis"
2008,ASTM,"D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis"
2006,ASTM,"D6866-06a Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis"
2006,ASTM,"D6866-06 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis"
2005,ASTM,"D6866-05 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis"
2004,ASTM,"D6866-04a Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis"
2004,ASTM,"D6866-04 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis"
2003,ASTM,"D6867-03 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing"
2011,ASTM,"D6868-11  Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities"
2011,ASTM,"D6869-03(2011) Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)"
2011,ASTM,"D6953-11 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)"
2003,ASTM,"D6979-03 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen"
2004,ASTM,"D6980-04 Test Method for Determination of Moisture in Plastics by Loss in Weight"
2007,ASTM,"D6988-07 Standard Guide for Determination of Thickness of Plastic Film Test Specimens"
2003,ASTM,"D6988-03 Standard Guide for Determination of Thickness of Plastic Film Test Specimens"
2005,ASTM,"D7027-05e1 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine"
2005,ASTM,"D7027-05 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine"
2004,ASTM,"D7029-04 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C]"
2004,ASTM,"D7082-04 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe"
2010,ASTM,"D7083-04(2010)e1 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography"
2010,ASTM,"D7107-04(2010) Standard Test Method for Creep Measurement of Self-Lubricating Bushings"
2011,ASTM,"D7133-11 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids"
2005,ASTM,"D7191-05 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor"
2008,ASTM,"D7192-08a Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement  Sensors"
2008,ASTM,"D7192-08 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement  Sensors"
2005,ASTM,"D7192-05 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors"
2011,ASTM,"D7193-11 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2005,ASTM,"D7211-05 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use"
2011,ASTM,"D7251-11 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products"
2011,ASTM,"D7251-11 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products (Redline)"
2009,ASTM,"D7251-09 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products"
2006,ASTM,"D7251-06e1 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products"
2006,ASTM,"D7251-06 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products"
2011,ASTM,"D7252-06(2011)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates"
2011,ASTM,"D7253-06(2011)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols"
2011,ASTM,"D7309-11 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry"
2007,ASTM,"D7309-07 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry"
2011,ASTM,"D7444-11  Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics"
2011,ASTM,"D7475-11 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions"
2011,ASTM,"D7711-11e1 Standard Guide for Description of Polymer Pellet Defects"
2011,ASTM,"D7711-11 Standard Guide for Description of Polymer Pellets Including Defects"
2011,ASTM,"D7745-11 Standard Practice for Testing Pultruded Composites"
2011,ASTM,"D5477-11 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)"
1995,ASTM,"D5477-95 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)"
2011,ASTM,"D6041-11 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings"
1997,ASTM,"D6041-97 Standard Specification for Contact-Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings"
2011,ASTM,"D4745-11a Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2011,ASTM,"D4754-11 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell"
2011,ASTM,"D5947-11 Standard Test Methods for  Physical Dimensions of Solid Plastics Specimens"
2011,ASTM,"D7310-11 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors"
2011,ASTM,"D7436-11 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology"
2011,ASTM,"D7774-11 Standard Test Method for Flexural Fatigue Properties of Plastics"
2000,ASTM,"D5422-00 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer"
2003,ASTM,"D5491-03 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials"
2006,ASTM,"D5492-06 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics"
1994,ASTM,"D5526-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions"
1999,ASTM,"D5629-99 Standard Test Method for Polyurethane Raw Materials  Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers"
2003,ASTM,"D5989-03 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)"
1996,ASTM,"D6042-96 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)"
2004,ASTM,"D6110-04 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics"
2010,ASTM,"D6112-10 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes"
2003,ASTM,"D6263-98(2003) Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
1998,ASTM,"D6263-98 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
1999,ASTM,"D6457-99e1 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)"
2000,ASTM,"D6585-00 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape"
2006,ASTM,"D7292-06 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)"
2006,ASTM,"D7293-06 Standard Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)"
2008,ASTM,"D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)"
2011,ASTM,"D6865-11  Standard Classification System and Basis for Specifications for Acrylonitrile&ndash;Styrene&ndash;Acrylate (ASA) and Acrylonitrile&ndash;EPDM<span class=""unicode"">&</span>"
2011,ASTM,"D4745-11ae1 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials"
2011,ASTM,"D6358-11 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods"
2011,ASTM,"D6394-11 Standard Specification for  Sulfone Plastics (SP)"
2011,ASTM,"D3567-97(2011) Standard Practice for  Determining Dimensions of &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings"
2011,ASTM,"D2517-06(2011) Standard Specification for  Reinforced Epoxy Resin Gas Pressure Pipe and Fittings "
2011,ASTM,"D4603-03(2011)e1 Standard Test Method for  Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer"
1998,ASTM,"D6262-98 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)"
2003,ASTM,"D6262-98(2003) Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)"
2012,ASTM,"D7473-12 Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations"
2012,ASTM,"D7474-12 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents"
2012,ASTM,"D3753-12 Standard Specification for  Glass-Fiber-Reinforced Polyester Manholes and Wetwells "
2012,ASTM,"D4000-12 Standard Classification System for  Specifying Plastic Materials"
2012,ASTM,"D4591-07(2012) Standard Test Method for  Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry"
2012,ASTM,"D4969-07(2012) Standard Specification for  Polytetrafluoroethylene&ndash;(PTFE) Coated Glass Fabric"
2012,ASTM,"D4976-12 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials"
2012,ASTM,"D4024-12 Standard Specification for Machine Made &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Flanges"
2012,ASTM,"D5365-12 Standard Test Method for Long-Term Ring-Bending Strain of &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe "
2012,ASTM,"D5526-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions"
2012,ASTM,"D5594-98(2012) Standard Test Method for  Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)"
2012,ASTM,"D5988-12 Standard Test Method for  Determining Aerobic Biodegradation of Plastic Materials in Soil"
2012,ASTM,"D6248-98(2012) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry"
2012,ASTM,"D6262-12 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)"
2012,ASTM,"D6400-12 Standard Specification for  Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities"
2012,ASTM,"D6778-12 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)"
2012,ASTM,"D6779-12 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2012,ASTM,"D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis"
2012,ASTM,"D7793-12 Standard Specification for Insulated Vinyl Siding"
2012,ASTM,"D7791-12 Standard Test Method for Uniaxial Fatigue Properties of Plastics"
2012,ASTM,"D6980-12 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight"
2012,ASTM,"D7134-05(2012) Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)"
2012,ASTM,"D7774-12 Standard Test Method for Flexural Fatigue Properties of Plastics"
2012,ASTM,"D5511-12 Standard Test Method for  Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions"
2012,ASTM,"D3681-12 Standard Test Method for  Chemical Resistance of &ldquo;Fiberglass&rdquo; (Glass&ndash;Fiber&ndash;Reinforced Thermosetting-Resin) Pipe in a Deflected Condition"
2012,ASTM,"D5224-12 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds (Redline)"
2012,ASTM,"D5224-12 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds"
2012,ASTM,"D4495-12 Standard Test Method for  Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight"
2012,ASTM,"D5748-95(2012) Standard Test Method for  Protrusion Puncture Resistance of Stretch Wrap Film "
2012,ASTM,"D2992-12 Standard Practice for  Obtaining Hydrostatic or Pressure Design Basis for &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2012,ASTM,"D1494-12 Standard Test Method for  Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2012,ASTM,"D2310-06(2012) Standard Classification for  Machine-Made &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2012,ASTM,"D2924-12 Standard Test Method for  External Pressure Resistance of &ldquo;Fiberglass&rdquo;<brk> (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe</brk>"
2012,ASTM,"D4459-12 Standard Practice for  Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2012,ASTM,"D4670-07(2012)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In Polyols"
2012,ASTM,"D4976-12a Standard Specification for  Polyethylene Plastics Molding and Extrusion Materials"
2012,ASTM,"D5507-99(2012) Standard Test Method for  Determination of Trace Organic Impurities in Monomer Grade  Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography"
2012,ASTM,"D5813-04(2012) Standard Specification for  Cured-In-Place Thermosetting Resin Sewer Piping Systems"
2012,ASTM,"D5948-05(2012) Standard Specification for Molding Compounds, Thermosetting"
2012,ASTM,"D6040-12 Standard Guide to  Standard Test Methods for Unsintered Polytetrafluoroethylene  (PTFE) Extruded Film or Tape"
2012,ASTM,"D6248-98(2012)e1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry"
2012,ASTM,"D6342-12 Standard Practice for  Polyurethane Raw Materials: Determining Hydroxyl Number of  Polyols by Near Infrared (NIR) Spectroscopy"
2012,ASTM,"D6474-12 Standard Test Method for  Determining Molecular Weight Distribution and Molecular Weight  Averages of Polyolefins by High Temperature Gel Permeation Chromatography"
2012,ASTM,"D6779-12a Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2012,ASTM,"D7194-12 Standard Specification for  Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)"
2012,ASTM,"D7292-12 Standard Specification for  Extruded, Compression-Molded, and Injection-Molded Basic Shapes  of Polyamide-Imide (PAI)"
2012,ASTM,"D7293-12 Standard Specification for  Extruded and Compression-Molded Shapes Made from Polyetherimide  (PEI)"
2012,ASTM,"D4526-12 Standard Practice for  Determination of Volatiles in Polymers by Static Headspace  Gas Chromatography"
2012,ASTM,"D4443-12 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2012,ASTM,"D4551-12 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment  Membrane"
2012,ASTM,"D4976-12a Standard Specification for  Polyethylene Plastics Molding and Extrusion Materials (Redline)"
2012,ASTM,"D5319-12 Standard Specification for  Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
2012,ASTM,"D7436-12 Standard Classification System for  Unfilled Polyethylene Plastics Molding and Extrusion Materials  with a Fractional Melt Index Using ISO Protocol and Methodology"
2012,ASTM,"D7568-12 Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications"
1988,ASTM,"D3678-88 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions"
2012,ASTM,"D3753-12e1 Standard Specification for  Glass-Fiber-Reinforced Polyester Manholes and Wetwells"
2013,ASTM,"D4000-13 Standard Classification System for  Specifying Plastic Materials"
2013,ASTM,"D4669-07(2013)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols"
2013,ASTM,"D4890-13 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA  Color of Polyols"
2013,ASTM,"D5071-06(2013) Standard Practice for  Exposure of Photodegradable Plastics in a Xenon Arc Apparatus"
2013,ASTM,"D5206-13 Standard Test Method for Windload Resistance of Rigid Plastic Siding"
2013,ASTM,"D5272-08(2013) Standard Practice for  Outdoor Exposure Testing of Photodegradable Plastics"
2013,ASTM,"D5576-00(2013) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin  Copolymers by Infrared Spectrophotometry (FT-IR)"
2013,ASTM,"D5630-13 Standard Test Method for Ash Content in Plastics"
2013,ASTM,"D5630-13 Standard Test Method for Ash Content in Plastics (Redline)"
2013,ASTM,"D6289-13 Standard Test Method for  Measuring Shrinkage from Mold Dimensions of Molded Thermosetting  Plastics"
2013,ASTM,"D6289-13 Standard Test Method for  Measuring Shrinkage from Mold Dimensions of Molded Thermosetting  Plastics (Redline)"
2013,ASTM,"D6954-04(2013) Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation"
2013,ASTM,"D6988-13 Standard Guide for  Determination of Thickness of Plastic Film Test Specimens"
2013,ASTM,"D7026-13 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis"
2013,ASTM,"D7210-13 Standard Practice for  Extraction of Additives in Polyolefin Plastics"
2013,ASTM,"D7211-13 Standard Specification for  Parts Machined from Polychlorotrifluoroethylene (PCTFE) and  Intended for General Use"
2013,ASTM,"D7823-13 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl  Chloride) Plastics by Thermal Desorption&mdash;Gas Chromatography/Mass  Chromatography"
2013,ASTM,"D6457-08(2013) Standard Specification for  Extruded and Compression Molded Rod and Heavy-Walled Tubing  Made from Polytetrafluoroethylene (PTFE)"
2013,ASTM,"D7611/D7611M-13 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2010,ASTM,"D7611/D7611M-10 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2013,ASTM,"D5227-13 Standard Test Method for  Measurement of Hexane Extractable Content of Polyolefins"
2013,ASTM,"D6108-13 Standard Test Method for  Compressive Properties of Plastic Lumber and Shapes"
2013,ASTM,"D6109-13 Standard Test Methods for  Flexural Properties of Unreinforced and Reinforced Plastic  Lumber and Related Products"
2013,ASTM,"D6111-13 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2013,ASTM,"D6112-13 Standard Test Methods for  Compressive and Flexural Creep and Creep-Rupture of Plastic  Lumber and Shapes"
2013,ASTM,"D6117-13 Standard Test Methods for  Mechanical Fasteners in Plastic Lumber and Shapes"
2013,ASTM,"D6341-13 Standard Test Method for  Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between &ndash;30 and  140&deg;F (&ndash;34.4 and 60&deg;C)"
2013,ASTM,"D6662-13 Standard Specification for  Polyolefin-Based Plastic Lumber Decking Boards"
2013,ASTM,"D7568-13 Standard Specification for  Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor  Applications"
2008,ASTM,"D3839-08 Standard Guide for Underground Installation of &ldquo;Fiberglass&rdquo; (Glass-FiberReinforced Thermosetting-Resin) Pipe (Redline)"
1995,ASTM,"D4443-95 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2003,ASTM,"D4617-03 Standard Classification System for Phenolic Compounds (PF)"
2003,ASTM,"D4617-03 Standard Classification System for Phenolic Compounds (PF) (Redline)"
1996,ASTM,"D4617-96 Standard Specification for Phenolic Compounds, (PF)"
2001,ASTM,"D4801-95(2001) Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater"
2000,ASTM,"D4968-00 Standard Guide for Annual Review of Test Methods and Specifications for Plastics"
2002,ASTM,"D5206-96(2002)e1 Standard Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding"
1991,ASTM,"D5208-91 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics (Withdrawn 2000)"
1994,ASTM,"D5511-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions"
2005,ASTM,"D6262-05 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) (Withdrawn 2010)"
2001,ASTM,"D5947-01e1 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens"
1996,ASTM,"D5991-96 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2002,ASTM,"D5477-02 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) (Withdrawn 2011)"
2002,ASTM,"D6041-97(2002) Standard Specification for Contact-Molded ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings (Withdrawn 2011)"
2013,ASTM,"D4329-13 Standard Practice for  Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics"
2013,ASTM,"D4364-13 Standard Practice for  Performing Outdoor Accelerated Weathering Tests of Plastics  Using Concentrated Sunlight"
2013,ASTM,"D4364-13 Standard Practice for  Performing Outdoor Accelerated Weathering Tests of Plastics  Using Concentrated Sunlight (Redline)"
2013,ASTM,"D5204-13 Standard Classification System for  Polyamide-Imide &amp;lpar;PAI&amp;rpar; Molding and Extrusion Materials"
2013,ASTM,"D5279-13 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Torsion"
2013,ASTM,"D5675-13 Standard Classification for  Low Molecular Weight PTFE and FEP Micronized Powders"
2013,ASTM,"D6099-13 Standard Test Method for  Polyurethane Raw Materials: Determination of Acidity in Moderate  to High Acidity Aromatic Isocyanates"
2013,ASTM,"D6111-13a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2013,ASTM,"D7793-13 Standard Specification for  Insulated Vinyl Siding"
1999,ASTM,"D4166-99 Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument"
1996,ASTM,"D6002-96 Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics"
1996,ASTM,"D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending"
1994,ASTM,"D5524-94 Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography"
1994,ASTM,"D5510-94 Standard Practice for Heat Aging of Oxidatively Degradable Plastics"
1995,ASTM,"D5815-95 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC)"
1996,ASTM,"D5951-96 Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing"
1993,ASTM,"D5271-93 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System"
2013,ASTM,"D6261-13 Standard Specification for  Extruded and Compression Molded Basic Shapes Made from Thermoplastic  Polyester (TPES)"
2013,ASTM,"D4756-13 Standard Practice for  Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and  Soffit"
2013,ASTM,"D5436-13 Standard Specification for  Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
2013,ASTM,"D7027-13 Standard Test Method for  Evaluation of Scratch Resistance of Polymeric Coatings and  Plastics Using an Instrumented Scratch Machine"
2013,ASTM,"D3679-13 Standard Specification for  Rigid Poly (Vinyl Chloride) (PVC) Siding"
2013,ASTM,"D4443-13 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2013,ASTM,"D6290-13 Standard Test Method for  Color Determination of Plastic Pellets"
2013,ASTM,"D6979-13 Standard Test Method for  Polyurethane Raw Materials: Determination of Basicity in Polyols,  Expressed as Percent Nitrogen"
2013,ASTM,"D7487-13 Standard Practice for  Polyurethane Raw Materials: Polyurethane Foam Cup Test"
2013,ASTM,"D4661-13 Standard Test Methods for  Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates"
2013,ASTM,"D7132-13 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene  Foam"
2013,ASTM,"D7309-13 Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2013,ASTM,"D4385-13 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic  Pultruded Products"
2013,ASTM,"D6576-13 Standard Specification for  Flexible Cellular Rubber Chemically Blown"
2014,ASTM,"D7258-14 Standard Specification for  Polymeric Piles"
2014,ASTM,"D7856-14 Standard Specification for Color and Appearance Retention of Solid and Variegated Color  Plastic Siding Products using CIELab Color Space"
2014,ASTM,"D3517-14 Standard Specification for  &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41;  Pressure Pipe"
2014,ASTM,"D3754-14 Standard Specification for  &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41;  Sewer and Industrial Pressure Pipe"
2014,ASTM,"D4659-14 Standard Test Methods for  Polyurethane Raw Materials: Determination of Specific Gravity  of Isocyanates"
2014,ASTM,"D6436-14 Standard Guide for  Reporting Properties for Plastics and Thermoplastic Elastomers"
2014,ASTM,"D6436-14 Standard Guide for  Reporting Properties for Plastics and Thermoplastic Elastomers (Redline)"
2014,ASTM,"D7132-14 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene  Foam"
2014,ASTM,"D3840-14 Standard Specification for  &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41;  Pipe Fittings for Nonpressure Applications"
2014,ASTM,"D4161-14 Standard Specification for  &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41;  Pipe Joints Using Flexible Elastomeric Seals"
2014,ASTM,"D5857-14 Standard Specification for  Polypropylene Injection and Extrusion Materials Using ISO Protocol  and Methodology"
2014,ASTM,"D6394-14 Standard Specification for  Sulfone Plastics &#40;SP&#41;"
2014,ASTM,"D5208-14 Standard Practice for  Fluorescent Ultraviolet &#40;UV&#41; Exposure of Photodegradable Plastics"
2014,ASTM,"D5208-14 Standard Practice for  Fluorescent Ultraviolet &#40;UV&#41; Exposure of Photodegradable Plastics (Redline)"
2014,ASTM,"D6261-14 Standard Specification for  Extruded and Compression Molded Basic Shapes Made from Thermoplastic  Polyester &#40;TPES&#41;"
2014,ASTM,"D6261-14 Standard Specification for  Extruded and Compression Molded Basic Shapes Made from Thermoplastic  Polyester &#40;TPES&#41; (Redline)"
2013,ASTM,"D6117-13e1 Standard Test Methods for  Mechanical Fasteners in Plastic Lumber and Shapes"
2014,ASTM,"D5989-14a Standard Specification for  Extruded and Monomer Cast Shapes Made from Nylon &#40;PA&#41;"
2014,ASTM,"D5989-14 Standard Specification for  Extruded and Monomer Cast Shapes Made from Nylon &#40;PA&#41;"
2014,ASTM,"D5225-14 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential  Viscometer"
2014,ASTM,"D2925-14 Standard Test Method for  Beam Deflection of &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber-Reinforced  Thermosetting Resin&#41; Pipe Under Full Bore Flow"
2014,ASTM,"D3678-14 Standard Specification for  Rigid Poly&#40;Vinyl Chloride&#41; &#40;PVC&#41; Interior-Profile Extrusions"
2013,ASTM,"D7611/D7611M-13e1 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2014,ASTM,"D6341-14a Standard Test Method for  Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between &ndash;30 and  140&deg;F &#40;&ndash;34.4 and 60&deg;C&#41;"
2014,ASTM,"D4877-14 Standard Test Method for  Polyurethane Raw Materials: Determination of APHA Color in  Isocyanates"
2014,ASTM,"D7486-14 Standard Test Method for  Measurement of Fines and Dust Particles on Plastic Pellets  by Wet Analysis"
2014,ASTM,"D7823-14 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly &#40;Vinyl  Chloride&#41; Plastics by Thermal Desorption&mdash;Gas Chromatography/Mass  Spectrometry"
2014,ASTM,"D5026-06(2014)e1 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Tension"
2014,ASTM,"D6867-03(2014) Standard Specification for  Perfluoroalkoxy &#40;PFA&#41;-Fluoropolymer Tubing"
2014,ASTM,"D5364-14 Standard Guide for  Design, Fabrication, and Erection of Fiberglass Reinforced  (FRP) Plastic Chimney Liners with Coal-Fired Units (Redline)"
2014,ASTM,"D6341-14 Standard Test Method for  Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between &ndash;30 and  140&deg;F &#40;&ndash;34.4 and 60&deg;C&#41;"
2014,ASTM,"D5048-14 Standard Test Method for  Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2014,ASTM,"D5207-14 Standard Practice for  Confirmation of 20&ndash;mm &#40;50&ndash;W&#41; and 125&ndash;mm &#40;500&ndash;W&#41;  Test Flames for Small-Scale Burning Tests on Plastic Materials"
2014,ASTM,"D6778-14 Standard Classification System and Basis for Specification&#13; for  Polyoxymethylene Molding and Extrusion Materials &#40;POM&#41;"
2014,ASTM,"D7710-14 Standard Test Method for Determination of Volume and Density of Rigid and Irregularly  Shaped Molded Cellular Materials"
2014,ASTM,"D4745-14 Standard Classification System and Basis for Specification&#13; for Filled Polytetrafluoroethlyene &#40;PTFE&#41; Molding and Extrusion  Materials Using ASTM Methods"
2014,ASTM,"D5364-14 Standard Guide for  Design, Fabrication, and Erection of Fiberglass Reinforced  (FRP) Plastic Chimney Liners with Coal-Fired Units"
2014,ASTM,"D5155-14 Standard Test Methods for  Polyurethane Raw Materials: Determination of the Isocyanate  Content of Aromatic Isocyanates"
2014,ASTM,"D6100-14 Standard Specification for  Extruded, Compression Molded and Injection Molded Polyoxymethylene  Shapes &#40;POM&#41;"
2014,ASTM,"D5419-14 Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Threaded Plastic  Closures"
2014,ASTM,"D5491-08(2014) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding  and Extrusion Materials"
2014,ASTM,"D5419-14a Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Threaded Plastic  Closures"
2014,ASTM,"D5045-14 Standard Test Methods for  Plane-Strain Fracture Toughness and Strain Energy Release Rate  of Plastic Materials"
2014,ASTM,"D5045-14 Standard Test Methods for  Plane-Strain Fracture Toughness and Strain Energy Release Rate  of Plastic Materials (Redline)"
2014,ASTM,"D5927-14 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods"
2010,ASTM,"D5083-10e1 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using  Straight-Sided Specimens"
2015,ASTM,"D4440-15 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology"
2014,ASTM,"D3839-14 Standard Guide for  Underground Installation of &ldquo;Fiberglass&rdquo; &#40;Glass-Fiber  Reinforced Thermosetting-Resin&#41; Pipe"
2015,ASTM,"D2143-15 Standard Test Method for  Cyclic Pressure Strength of Reinforced, Thermosetting Plastic  Pipe"
2015,ASTM,"D2996-15 Standard Specification for  Filament-Wound &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2015,ASTM,"D2997-15 Standard Specification for  Centrifugally Cast &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2015,ASTM,"D4895-15 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2015,ASTM,"D4441-15 Standard Specification for  Aqueous Dispersions of Polytetrafluoroethylene"
2015,ASTM,"D4024-15 Standard Specification for  Machine Made &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges"
2015,ASTM,"D5421-15 Standard Specification for  Contact Molded &ldquo;Fiberglass&rdquo; (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges"
2015,ASTM,"D4726-15 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions  Used for Assembled Windows and Doors"
2015,ASTM,"D4068-15 Standard Specification for  Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment  Membrane"
2015,ASTM,"D4889-15 Standard Test Methods for  Polyurethane Raw Materials: Determination of Viscosity of Crude  or Modified Isocyanates "
2015,ASTM,"D4663-15 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine  of Isocyanates "
2015,ASTM,"D5338-15 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under  Controlled Composting Conditions, Incorporating Thermophilic Temperatures"
2015,ASTM,"D5338-15 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under  Controlled Composting Conditions, Incorporating Thermophilic Temperatures (Redline)"
2015,ASTM,"D4878-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
2015,ASTM,"D5436-15 Standard Specification for  Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
2015,ASTM,"D5436-15 Standard Specification for  Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes (Redline)"
2015,ASTM,"D5418-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever  Beam)"
2015,ASTM,"D5026-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2015,ASTM,"D5672/D5672M-15 Standard Test Method for  Testing Flexible Cellular Materials Measurement of Indentation  Force Deflection Using a 25-mm [1-in.] Deflection Technique"
2015,ASTM,"D7711-11(2015) Standard Guide for Description of Polymer Pellet Defects"
2015,ASTM,"D4662-15 Standard Test Methods for  Polyurethane Raw Materials: Determination of Acid and Alkalinity  Numbers of Polyols "
2015,ASTM,"D4549-15 Standard Classification System and Basis for Specification
 for  Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion  Materials (PS)"
2015,ASTM,"D4549-15 Standard Classification System and Basis for Specification
 for  Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion  Materials (PS) (Redline)"
2015,ASTM,"D6226-15 Standard Test Method for Open Cell Content of Rigid Cellular Plastics"
2015,ASTM,"D3892-15 Standard Practice for Packaging/Packing of Plastics"
2015,ASTM,"D3892-15 Standard Practice for Packaging/Packing of Plastics (Redline)"
2015,ASTM,"D7991-15 Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy  Marine Sediment under Controlled Laboratory Conditions"
2015,ASTM,"D6360-15 Standard Practice for  Enclosed Carbon-Arc Exposures of Plastics"
2015,ASTM,"D6360-15 Standard Practice for  Enclosed Carbon-Arc Exposures of Plastics (Redline)"
2015,ASTM,"D6150-15 Standard Test Method for  Estimating Processing Losses of Plastisols and Organosols Due  to Volatility"
2013,ASTM,"D5575-07(2013) Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated  Monomers"
2014,ASTM,"D2105-01(2014) Standard Test Method for  Longitudinal Tensile Properties of &ldquo;Fiberglass&rdquo;  &#40;Glass-Fiber-Reinforced Thermosetting-Resin&#41; Pipe and Tube"
2014,ASTM,"D3982-08(2014) Standard Specification for  Contact Molded &ldquo;Fiberglass&rdquo; &#40;Glass Fiber Reinforced  Thermosetting Resin&#41; Ducts"
2014,ASTM,"D6835-08(2014) Standard Classification System for  Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials  &#40;TEEE&#41;"
2014,ASTM,"D7471-09(2014) Standard Specification for  CPT-Fluoropolymer Molding and Extrusion Materials"
2014,ASTM,"D7472-09(2014) Standard Specification for  EFEP-Fluoropolymer Molding and Extrusion Materials"
2012,ASTM,"D3681-12e1 Standard Test Method for  Chemical Resistance of &ldquo;Fiberglass&rdquo; &#40;Glass&ndash;Fiber&ndash;Reinforced  Thermosetting-Resin&#41; Pipe in a Deflected Condition"
2013,ASTM,"D7486-08(2013)e1 Standard Test Method for  Measurement of Fines and Dust Particles on Plastic Pellets  by Wet Analysis"
2015,ASTM,"D7856-15 Standard Specification for Color and Appearance Retention of Solid and Variegated Color  Plastic Siding Products using CIELab Color Space"
2015,ASTM,"D5336-15 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials"
2015,ASTM,"D5336-15a Standard Classification System and Basis for Specification
 for Polyphthalamide (PPA) Injection Molding Materials"
2015,ASTM,"D5926-15 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent  (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
2015,ASTM,"D5926-15 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent  (DWV), Sewer, Sanitary, and Storm Plumbing Systems (Redline)"
2015,ASTM,"D7792/D7792M-15 Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer  (FRP) Composites Used in Structural Designs"
2015,ASTM,"D7992/D7992M-15 Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded  Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs"
2015,ASTM,"D6263-15 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride)  (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
2015,ASTM,"D7082-15 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage  Pipe"
2015,ASTM,"D5991-15 Standard Practice for  Separation and Identification of Poly(Vinyl Chloride) (PVC)  Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2015,ASTM,"D6265-15 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter  Test"
2015,ASTM,"D6288-15 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
2015,ASTM,"D7997-15 Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam  Formulations"
2015,ASTM,"D7856-15a Standard Specification for Color and Appearance Retention of Solid and Variegated Color  Plastic Siding Products using CIELab Color Space"
2015,ASTM,"D7990-15 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature  Rise in Polymeric Siding"
2015,ASTM,"D8019-15 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength  of Fiber Reinforced Polymer Crossarms Assembled with Center Mount  Brackets"
2015,ASTM,"D4802-15 Standard Specification for  Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2014,ASTM,"D5155-14e1 Standard Test Methods for  Polyurethane Raw Materials: Determination of the Isocyanate  Content of Aromatic Isocyanates"
2015,ASTM,"D4968-15 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2015,ASTM,"C581-15 Standard Practice for  Determining Chemical Resistance of Thermosetting Resins Used  in Glass-Fiber-Reinforced Structures Intended for Liquid Service"
2015,ASTM,"D4167-15 Standard Specification for  Fiber-Reinforced Plastic Fans and Blowers"
2013,ASTM,"D7487-13e1 Standard Practice for  Polyurethane Raw Materials: Polyurethane Foam Cup Test"
2016,ASTM,"D4475-02(2016) Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced  Plastic Rods By the Short-Beam Method"
2016,ASTM,"D4634-16 Standard Classification System and Basis for Specification for  Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
2016,ASTM,"D4634-16 Standard Classification System and Basis for Specification for  Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) (Redline)"
2016,ASTM,"D4673-16 Standard Classification System for and Basis for Specification for Acrylonitrile&#x2013;Butadiene&#x2013;Styrene (ABS) Plastics  and Alloys Molding and Extrusion Materials"
2016,ASTM,"D5138-16 Standard Classification System and Basis for Specification for  Liquid Crystal Polymers Molding and Extrusion Materials (LCP)"
2016,ASTM,"D5629-16 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity  Aromatic Isocyanates and Polyurethane Prepolymers"
2016,ASTM,"D6437-05(2016)e1 Standard Test Method for  Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols  (Determination of CPR Values of Polyols)"
2016,ASTM,"D3262-16 Standard Specification for &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer Pipe"
2016,ASTM,"D5870-16 Standard Practice for  Calculating Property Retention Index of Plastics"
2016,ASTM,"D4968-16 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2016,ASTM,"D4000-16 Standard Classification System for Specifying Plastic Materials"
2016,ASTM,"D6341-16 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between &#x2013;30 and  140&#xb0;F (&#x2013;34.4 and 60&#xb0;C)"
2016,ASTM,"D8036-16 Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in  Pure MDI"
2016,ASTM,"D4895-16 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2016,ASTM,"E1788-16 Standard Test Method for Acidity in Acrylonitrile"
2016,ASTM,"E1788-16 Standard Test Method for Acidity in Acrylonitrile (Redline)"
2016,ASTM,"D7083-16 Standard Practice for  Determination of Monomeric Plasticizers in Poly (Vinyl Chloride)  (PVC) by Gas Chromatography"
2016,ASTM,"D7083-16 Standard Practice for  Determination of Monomeric Plasticizers in Poly (Vinyl Chloride)  (PVC) by Gas Chromatography (Redline)"
2016,ASTM,"D7823-16 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl  Chloride) Plastics by Thermal Desorption&#x2014;Gas Chromatography/Mass  Spectrometry"
2016,ASTM,"D6777-16 Standard Test Method for  Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding"
2016,ASTM,"D6777-16 Standard Test Method for  Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding (Redline)"
2016,ASTM,"D4802-16 Standard Specification for  Poly(Methyl Methacrylate) Acrylic Plastic Sheet"
2016,ASTM,"D4802-16 Standard Specification for  Poly(Methyl Methacrylate) Acrylic Plastic Sheet (Redline)"
2016,ASTM,"D5260-16 Standard Classification for  Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer  and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC)  Compounds"
2016,ASTM,"D4477-16 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2016,ASTM,"D4226-16 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building  Products"
2016,ASTM,"D4495-16 Standard Test Method for  Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles  by Means of a Falling Weight"
2016,ASTM,"D5420-16 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimen by Means  of a Striker Impacted by a Falling Weight (Gardner Impact)"
2016,ASTM,"D3841-16 Standard Specification for  Glass-Fiber-Reinforced Polyester Plastic Panels"
2016,ASTM,"D6150-16 Standard Test Method for  Estimating Processing Losses of Plastisols and Organosols Due  to Volatility"
2016,ASTM,"D4397-16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural  Applications"
2016,ASTM,"D4397-16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural  Applications (Redline)"
2016,ASTM,"D6779-16 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2016,ASTM,"D6866-16 Standard Test Methods for  Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2016,ASTM,"D6117-16 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes"
2016,ASTM,"D6042-09(2016) Standard Test Method for  Determination of Phenolic Antioxidants and Erucamide Slip Additives  in Polypropylene Homopolymer Formulations Using Liquid Chromatography  (LC) "
2016,ASTM,"D5998-16 Standard Specification for  Molded Polyethylene Shipping and Storage Drums"
2016,ASTM,"D5998-16 Standard Specification for  Molded Polyethylene Shipping and Storage Drums (Redline)"
2016,ASTM,"D5740-16 Standard Guide for Writing Material Standards in the Classification <astmref  design=""D4000""/> Format"
2016,ASTM,"D5226-16 Standard Practice for  Dissolving Polymer Materials"
2016,ASTM,"D5930-16 Standard Test Method for  Thermal Conductivity of Plastics by Means of a Transient Line-Source  Technique"
2016,ASTM,"D7253-16 Standard Test Method for  Polyurethane Raw Materials: Determination of Acidity as Acid  Number for Polyether Polyols"
2016,ASTM,"D7133-16 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus  CIELAB Color and Yellowness Index of Liquids"
2016,ASTM,"D6098-16 Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate  (PC)"
2016,ASTM,"D6098-16 Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate  (PC) (Redline)"
2016,ASTM,"D8065/D8065M-16 Standard Classification System and Basis for Specification for Specifying Plastic Films"
2016,ASTM,"D5508-16 Standard Test Method for  Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile  Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary  Gas Chromatography (HS-CGC)"
2016,ASTM,"D4349-16 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials"
2016,ASTM,"D5205-16 Standard Classification System and Basis for Specification for  Polyetherimide (PEI) Materials"
2016,ASTM,"D5677-16 Standard Specification for  Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe  and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine  Fuel Lines"
2016,ASTM,"D4801-08(2016) Standard Specification for  Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and  Greater"
2016,ASTM,"D4473-08(2016) Standard Test Method for  Plastics: Dynamic Mechanical Properties: Cure Behavior"
2016,ASTM,"C582-09(2016) Standard Specification for  Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates  for Corrosion-Resistant Equipment"
2016,ASTM,"D7793-16 Standard Specification for Insulated Vinyl Siding"
2016,ASTM,"D8033-16 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials"
2015,ASTM,"D7254-15 Standard Specification for  Polypropylene (PP) Siding"
2015,ASTM,"D5857-15 Standard Specification for  Polypropylene Injection and Extrusion Materials Using ISO Protocol  and Methodology"
2017,ASTM,"D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber  Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross  Sections under Bending"
2017,ASTM,"D5047-17 Standard Specification for  Polyethylene Terephthalate Film and Sheeting"
2017,ASTM,"D5047-17 Standard Specification for  Polyethylene Terephthalate Film and Sheeting (Redline)"
2017,ASTM,"D6712-17 Standard Specification for  Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic  Shapes"
2017,ASTM,"D6712-17 Standard Specification for  Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic  Shapes (Redline)"
2017,ASTM,"D4670-17 Standard Test Method for  Polyurethane Raw Materials: Determination of Suspended Matter  in Polyols "
2017,ASTM,"D4670-17 Standard Test Method for  Polyurethane Raw Materials: Determination of Suspended Matter  in Polyols  (Redline)"
2017,ASTM,"D6779-17 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2017,ASTM,"D5927-17 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials  Based on ISO Test Methods"
2017,ASTM,"D5927-17 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials  Based on ISO Test Methods (Redline)"
2017,ASTM,"D5677-17 Standard Specification for  Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe  and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine  Fuel Lines"
2017,ASTM,"D5677-17 Standard Specification for  Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe  and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine  Fuel Lines (Redline)"
2017,ASTM,"D5017-17 Standard Test Method for  Determination of Linear Low Density Polyethylene (LLDPE) Composition  by Carbon-13 Nuclear Magnetic Resonance"
2017,ASTM,"D6865-17 Standard Classification System and Basis for Specifications for  Acrylonitrile&#x2013;Styrene&#x2013;Acrylate (ASA) and Acrylonitrile&#x2013;EPDM&#x2013;Styrene  (AES) Plastics and Alloys Molding and Extrusion Materials"
2017,ASTM,"D6865-17 Standard Classification System and Basis for Specifications for  Acrylonitrile&#x2013;Styrene&#x2013;Acrylate (ASA) and Acrylonitrile&#x2013;EPDM&#x2013;Styrene  (AES) Plastics and Alloys Molding and Extrusion Materials (Redline)"
2017,ASTM,"D6868-17 Standard Specification for  Labeling of End Items that Incorporate Plastics and Polymers  as Coatings or Additives with Paper and Other Substrates Designed  to be Aerobically Composted in Municipal or Industrial Facilities"
2017,ASTM,"D5083-17 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using  Straight-Sided Specimens"
2017,ASTM,"D5083-17 Standard Test Method for  Tensile Properties of Reinforced Thermosetting Plastics Using  Straight-Sided Specimens (Redline)"
2017,ASTM,"D6272-17 Standard Test Method for  Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials by Four-Point Bending"
2017,ASTM,"D6272-17 Standard Test Method for  Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials by Four-Point Bending (Redline)"
2017,ASTM,"D4068-17 Standard Specification for  Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment  Membrane"
2017,ASTM,"D4068-17 Standard Specification for  Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment  Membrane (Redline)"
2017,ASTM,"D6662-17 Standard Specification for  Polyolefin-Based Plastic Lumber Decking Boards"
2017,ASTM,"D7258-17 Standard Specification for Polymeric Piles"
2017,ASTM,"D7568-17 Standard Specification for  Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor  Applications"
2017,ASTM,"D7252-17 Standard Test Method for  Polyurethane Raw Materials: Determination of Monomer and Isomers  in Isocyanates"
2017,ASTM,"D7436-17 Standard Classification System for  Unfilled Polyethylene Plastics Molding and Extrusion Materials  with a Fractional Melt Index Using ISO Protocol and Methodology"
2017,ASTM,"D7436-17 Standard Classification System for  Unfilled Polyethylene Plastics Molding and Extrusion Materials  with a Fractional Melt Index Using ISO Protocol and Methodology (Redline)"
2017,ASTM,"D7791-17 Standard Test Method for  Uniaxial Fatigue Properties of Plastics"
2017,ASTM,"D7774-17 Standard Test Method for  Flexural Fatigue Properties of Plastics"
2017,ASTM,"D5857-17 Standard Specification for  Polypropylene Injection and Extrusion Materials Using ISO Protocol  and Methodology"
2017,ASTM,"D5857-17 Standard Specification for  Polypropylene Injection and Extrusion Materials Using ISO Protocol  and Methodology (Redline)"
2017,ASTM,"D5132-17 Standard Test Method for  Horizontal Burning Rate of Polymeric Materials Used in Occupant  Compartments of Motor Vehicles"
2017,ASTM,"D5946-17 Standard Test Method for  Corona-Treated Polymer Films Using Water Contact Angle Measurements"
2017,ASTM,"D5946-17 Standard Test Method for  Corona-Treated Polymer Films Using Water Contact Angle Measurements (Redline)"
2017,ASTM,"D7254-17 Standard Specification for  Polypropylene (PP) Siding"
2017,ASTM,"D3679-17 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2017,ASTM,"D7793-17 Standard Specification for Insulated Vinyl Siding"
2017,ASTM,"D7445-17 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing  (Backed Vinyl Siding)"
2017,ASTM,"D2996-17 Standard Specification for  Filament-Wound &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2017,ASTM,"D5930-17 Standard Test Method for  Thermal Conductivity of Plastics by Means of a Transient Line-Source  Technique"
2017,ASTM,"D5930-17 Standard Test Method for  Thermal Conductivity of Plastics by Means of a Transient Line-Source  Technique (Redline)"
2017,ASTM,"D5492-17 Standard Test Method for  Determination of Xylene Solubles in Propylene Plastics"
2017,ASTM,"D5492-17 Standard Test Method for  Determination of Xylene Solubles in Propylene Plastics (Redline)"
2017,ASTM,"D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight"
2017,ASTM,"D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight (Redline)"
2017,ASTM,"D7474-17 Standard Practice for  Determining Residual Stresses in Extruded or Molded Sulfone  Plastic (SP) Parts by Immersion in Various Chemical Reagents"
2017,ASTM,"D7474-17 Standard Practice for  Determining Residual Stresses in Extruded or Molded Sulfone  Plastic (SP) Parts by Immersion in Various Chemical Reagents (Redline)"
2017,ASTM,"D4968-17 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2017,ASTM,"D2924-12(2017) Standard Test Method for External Pressure Resistance of &#x201c;Fiberglass&#x201d;<brk  /> (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2017,ASTM,"D5028-17 Standard Test Method for  Curing Properties of Pultrusion Resins by Thermal Analysis"
2017,ASTM,"D5028-17 Standard Test Method for  Curing Properties of Pultrusion Resins by Thermal Analysis (Redline)"
2017,ASTM,"D7029-17 Standard Test Method for  Determination of Reactivity of Unsaturated Polyesters and Vinyl  Esters at 180.0&#xb0;F (82.2&#xb0;C)"
2017,ASTM,"D7029-17 Standard Test Method for  Determination of Reactivity of Unsaturated Polyesters and Vinyl  Esters at 180.0&#xb0;F (82.2&#xb0;C) (Redline)"
2017,ASTM,"D6338-17 Standard Classification System for  Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based  on ASTM Standard Test Methods"
2017,ASTM,"D6338-17 Standard Classification System for  Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based  on ASTM Standard Test Methods (Redline)"
2017,ASTM,"D5319-17 Standard Specification for  Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
2017,ASTM,"D7193-17 Standard Specification for  Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded  Film or Tape"
2017,ASTM,"D7193-17 Standard Specification for  Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded  Film or Tape (Redline)"
2017,ASTM,"D4969-17 Standard Specification for Polytetrafluoroethylene&#x2013;(PTFE) Coated Glass Fabric"
2017,ASTM,"D4969-17 Standard Specification for Polytetrafluoroethylene&#x2013;(PTFE) Coated Glass Fabric (Redline)"
2017,ASTM,"D6585-17 Standard Specification for  Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or  Tape"
2017,ASTM,"D6585-17 Standard Specification for  Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or  Tape (Redline)"
2017,ASTM,"D8136-17 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability  Using a Non-Contact Capacitance Thickness Gauge"
2017,ASTM,"D3567-17 Standard Practice for Determining Dimensions of &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced  Thermosetting Resin) Pipe and Fittings"
2017,ASTM,"D3567-17 Standard Practice for Determining Dimensions of &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced  Thermosetting Resin) Pipe and Fittings (Redline)"
2017,ASTM,"D8133-17 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly(Vinyl  Chloride) Plastics by Solvent Extraction&#x2014;Gas Chromatography/Mass  Spectrometry"
2017,ASTM,"D1494-17 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2017,ASTM,"D4551-17 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment  Membrane"
2017,ASTM,"D6110-17 Standard Test Method for  Determining the Charpy Impact Resistance of Notched Specimens  of Plastics"
2017,ASTM,"D5991-17 Standard Practice for  Separation and Identification of Poly(Vinyl Chloride) (PVC)  Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2017,ASTM,"D6265-17 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter  Test"
2017,ASTM,"D6288-17 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
2017,ASTM,"D5225-17 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential  Viscometer"
2017,ASTM,"D4591-17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers  by Differential Scanning Calorimetry"
2018,ASTM,"D6110-18 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens  of Plastics"
2018,ASTM,"D5988-18 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in  Soil"
2018,ASTM,"D4754-18 Standard Test Method for  Two-Sided Liquid Extraction of Plastic Materials Using FDA  Migration Cell"
2018,ASTM,"D2992-18 Standard Practice for  Obtaining Hydrostatic or Pressure Design Basis for &#x201c;Fiberglass&#x201d;  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2017,ASTM,"D5204-17 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2017,ASTM,"D6691-17 Standard Test Method for  Determining Aerobic Biodegradation of Plastic Materials in  the Marine Environment by a Defined Microbial Consortium or Natural  Sea Water Inoculum"
2017,ASTM,"D6783-05a(2017) Standard Specification for  Polymer Concrete Pipe "
2017,ASTM,"D6869-17 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics  Using the Karl Fischer Reaction (the Reaction of Iodine with Water)"
2017,ASTM,"D5422-17 Standard Test Method for  Measurement of Properties of Thermoplastic Materials by Screw-Extrusion  Capillary Rheometer"
2017,ASTM,"D5117-17 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock"
2017,ASTM,"D6100-17 Standard Specification for  Extruded, Compression Molded and Injection Molded Polyoxymethylene  Shapes (POM)"
2017,ASTM,"D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber  Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross  Sections under Bending"
2017,ASTM,"D6262-17 Standard Specification for  Extruded, Compression Molded, and Injection Molded Basic Shapes  of Poly(aryl ether ketone) (PAEK)"
2018,ASTM,"D2517-18 Standard Specification for  Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2017,ASTM,"D6287-17 Standard Practice for  Cutting Film and Sheeting Test Specimens"
2018,ASTM,"D7445-18 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing  (Backed Vinyl Siding)"
2018,ASTM,"D5511-18 Standard Test Method for  Determining Anaerobic Biodegradation of Plastic Materials Under  High-Solids Anaerobic-Digestion Conditions"
2018,ASTM,"D6954-18 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment  by a Combination of Oxidation and Biodegradation"
2018,ASTM,"D6866-18 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2018,ASTM,"D4669-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Specific Gravity  of Polyols "
2018,ASTM,"D5675-13(2018) Standard Classification for  Low Molecular Weight PTFE and FEP Micronized Powders"
2018,ASTM,"D5592-94(2018) Standard Guide for  Material Properties Needed in Engineering Design Using Plastics"
2018,ASTM,"D4803-10(2018)e1 Standard Test Method for  Predicting Heat Buildup in PVC Building Products"
2018,ASTM,"D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low  Density Polyethylene Mixtures Using Infrared Spectrophotometry"
2018,ASTM,"D5740-18 Standard Guide for Writing Material Standards in the Classification <astmref  design=""D4000""/> Format"
2018,ASTM,"D5740-18 Standard Guide for Writing Material Standards in the Classification <astmref  design=""D4000""/> Format (Redline)"
2018,ASTM,"D5628-18 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimens by Means  of a Falling Dart (Tup or Falling Mass)"
2018,ASTM,"D4986-18 Standard Test Method for  Horizontal Burning Characteristics of Cellular Polymeric Materials"
2018,ASTM,"D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate)  (PET) by Glass Capillary Viscometer"
2018,ASTM,"D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate)  (PET) by Glass Capillary Viscometer (Redline)"
2018,ASTM,"D6117-18 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes"
2018,ASTM,"D6112-18 Standard Test Methods for  Compressive and Flexural Creep and Creep-Rupture of Plastic  Lumber and Shapes"
2018,ASTM,"D6111-18 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2018,ASTM,"D6108-18 Standard Test Method for  Compressive Properties of Plastic Lumber and Shapes"
2018,ASTM,"D8195-18 Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting"
2018,ASTM,"D8156-18 Standard Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials  (TPC)"
2018,ASTM,"D5947-18 Standard Test Methods for  Physical Dimensions of Solid Plastics Specimens"
2018,ASTM,"D6456-10(2018) Standard Specification for Finished Parts Made from Polyimide Resin"
2018,ASTM,"D7487-18 Standard Practice for  Polyurethane Raw Materials: Polyurethane Foam Cup Test"
2018,ASTM,"D6979-18 Standard Test Method for  Polyurethane Raw Materials: Determination of Basicity in Polyols,  Expressed as Percent Nitrogen"
2018,ASTM,"D4890-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA  Color of Polyols"
2018,ASTM,"D5575-18 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated  Monomers"
2018,ASTM,"D5575-18 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated  Monomers (Redline)"
2018,ASTM,"D7444-18 Standard Practice for  Heat and Humidity Aging of Oxidatively Degradable Plastics"
2018,ASTM,"D3299-18 Standard Specification for  Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant  Tanks"
2018,ASTM,"D3299-18 Standard Specification for  Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant  Tanks (Redline)"
2018,ASTM,"D4097-18 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant  Tanks"
2018,ASTM,"D6099-18 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate  to High Acidity Aromatic Isocyanates"
2018,ASTM,"D5594-18 Standard Test Method for  Determination of the Vinyl Acetate Content of Ethylene-Vinyl  Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy  (FT-IR)"
2018,ASTM,"D5365-18 Standard Test Method for Long-Term Ring-Bending Strain of &#x201c;Fiberglass&#x201d;  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2018,ASTM,"D4661-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates"
2018,ASTM,"D3681-18 Standard Test Method for  Chemical Resistance of &#x201c;Fiberglass&#x201d; (Glass&#x2013;Fiber&#x2013;Reinforced  Thermosetting-Resin) Pipe in a Deflected Condition"
2018,ASTM,"D5989-18 Standard Specification for  Extruded and Monomer Cast Shapes Made from Nylon (PA)"
2018,ASTM,"D5989-18 Standard Specification for  Extruded and Monomer Cast Shapes Made from Nylon (PA) (Redline)"
2018,ASTM,"D7292-18 Standard Specification for  Extruded, Compression-Molded, and Injection-Molded Basic Shapes  of Polyamide-Imide (PAI)"
2018,ASTM,"D7292-18 Standard Specification for  Extruded, Compression-Molded, and Injection-Molded Basic Shapes  of Polyamide-Imide (PAI) (Redline)"
2018,ASTM,"D5477-18 Standard Practice for  Identification of Polymer Layers or Inclusions by Fourier Transform  Infrared Microspectroscopy (FT-IR)"
2018,ASTM,"D5477-18 Standard Practice for  Identification of Polymer Layers or Inclusions by Fourier Transform  Infrared Microspectroscopy (FT-IR) (Redline)"
2018,ASTM,"D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion  Materials"
2018,ASTM,"D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion  Materials (Redline)"
2018,ASTM,"D4726-18 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions  Used for Assembled Windows and Doors"
2018,ASTM,"D5814-18 Standard Practice for  Determination of Contamination in Recycled Poly(Ethylene Terephthalate)  (PET) Flakes and Chips Using a Plaque Test"
2018,ASTM,"D4803-18 Standard Test Method for  Predicting Heat Buildup in PVC Building Products"
2018,ASTM,"E1863-18 Standard Test Method for  Analysis of Acrylonitrile by Gas Chromatography"
2018,ASTM,"D5813-04(2018) Standard Specification for  Cured-In-Place Thermosetting Resin Sewer Piping Systems"
2018,ASTM,"D6068-10(2018) Standard Test Method for  Determining <emph type=""bdit"">J-R </emph>Curves of Plastic  Materials"
2018,ASTM,"D5526-18 Standard Test Method for  Determining Anaerobic Biodegradation of Plastic Materials Under  Accelerated Landfill Conditions"
2018,ASTM,"D5526-18 Standard Test Method for  Determining Anaerobic Biodegradation of Plastic Materials Under  Accelerated Landfill Conditions (Redline)"
2018,ASTM,"D5048-18 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2018,ASTM,"D7444-18a Standard Practice for  Heat and Humidity Aging of Oxidatively Degradable Plastics"
2018,ASTM,"D7444-18a Standard Practice for  Heat and Humidity Aging of Oxidatively Degradable Plastics (Redline)"
2018,ASTM,"D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry"
2018,ASTM,"D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry (Redline)"
2018,ASTM,"D6247-18 Standard Test Method for  Determination of Elemental Content of Polyolefins by Wavelength  Dispersive X-ray Fluorescence Spectrometry"
2018,ASTM,"D6247-18 Standard Test Method for  Determination of Elemental Content of Polyolefins by Wavelength  Dispersive X-ray Fluorescence Spectrometry (Redline)"
2018,ASTM,"D6290-18 Standard Test Method for  Color Determination of Plastic Pellets"
2018,ASTM,"D7211-13(2018) Standard Specification for  Parts Machined from Polychlorotrifluoroethylene (PCTFE) and  Intended for General Use"
2018,ASTM,"D4883-18 Standard Test Method for  Density of Polyethylene by the Ultrasound Technique"
2018,ASTM,"D4895-18 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
2018,ASTM,"D4895-18 Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion (Redline)"
2018,ASTM,"D6041-18 Standard Specification for  Contact-Molded &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced  Thermosetting Resin) Corrosion Resistant Pipe and Fittings"
2018,ASTM,"D7192-18 Standard Test Method for  High Speed Puncture Properties of Plastic Films Using Load  and Displacement Sensors"
2018,ASTM,"D953-18 Standard Test Method for  Pin-Bearing Strength of Plastics"
2018,ASTM,"D5594-18a Standard Test Method for  Determination of the Vinyl Acetate Content of Ethylene-Vinyl  Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy  (FT-IR)"
2018,ASTM,"D5594-18a Standard Test Method for  Determination of the Vinyl Acetate Content of Ethylene-Vinyl  Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy  (FT-IR) (Redline)"
2018,ASTM,"D6953-18 Standard Test Method for  Determination of Antioxidants and Erucamide Slip Additives  in Polyethylene Using Liquid Chromatography (LC)"
2018,ASTM,"D6953-18 Standard Test Method for  Determination of Antioxidants and Erucamide Slip Additives  in Polyethylene Using Liquid Chromatography (LC) (Redline)"
2018,ASTM,"D7611/D7611M-18 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2018,ASTM,"D7823-18 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride)  Plastics by Thermal Desorption&#x2014;Gas Chromatography/Mass Spectrometry"
2018,ASTM,"D8133-18 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride)  Plastics by Solvent Extraction&#x2014;Gas Chromatography/Mass Spectrometry"
2018,ASTM,"D6040-18 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene  (PTFE) Extruded Film or Tape"
2018,ASTM,"D6040-18 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene  (PTFE) Extruded Film or Tape (Redline)"
2018,ASTM,"D7191-18 Standard Test Method for  Determination of Moisture in Plastics by Relative Humidity  Sensor"
2019,ASTM,"D4674-19 Standard Practice for  Accelerated Testing for Color Stability of Plastics Exposed  to Indoor Office Environments"
2019,ASTM,"D6339-11(2019) Standard Classification System for and Basis for Specifications for  Syndiotactic Polystyrene Molding and Extrusion (SPS)"
2019,ASTM,"D4161-14(2019) Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pipe Joints Using Flexible Elastomeric Seals"
2019,ASTM,"D4443-19 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography"
2019,ASTM,"D4443-19 Standard Test Method for  Determining Residual Vinyl Chloride Monomer Content in PPB  Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography (Redline)"
2019,ASTM,"D5577-19 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled  Plastics"
2019,ASTM,"D7132-19 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene  Foam"
2019,ASTM,"D7132-19 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene  Foam (Redline)"
2019,ASTM,"D5685-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pressure Pipe Fittings"
2019,ASTM,"D5685-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pressure Pipe Fittings (Redline)"
2019,ASTM,"D6358-19 Standard Classification System and Basis for Specification for  Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion  and Blow Molding Materials Using ISO Methods"
2019,ASTM,"D6358-19 Standard Classification System and Basis for Specification for  Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion  and Blow Molding Materials Using ISO Methods (Redline)"
2019,ASTM,"D6109-19 Standard Test Methods for  Flexural Properties of Unreinforced and Reinforced Plastic  Lumber and Related Products"
2019,ASTM,"D4968-19 Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2019,ASTM,"D6289-13(2019) Standard Test Method for  Measuring Shrinkage from Mold Dimensions of Molded Thermosetting  Plastics"
2019,ASTM,"D5364-14(2019) Standard Guide for  Design, Fabrication, and Erection of Fiberglass Reinforced  (FRP) Plastic Chimney Liners with Coal-Fired Units"
2019,ASTM,"D4804-19 Standard Test Method for  Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2019,ASTM,"D6111-19 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2019,ASTM,"D6108-19 Standard Test Method for  Compressive Properties of Plastic Lumber and Shapes"
2019,ASTM,"D6400-19 Standard Specification for  Labeling of Plastics Designed to be Aerobically Composted in  Municipal or Industrial Facilities"
2019,ASTM,"D7471-19 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials"
2019,ASTM,"D7471-19 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials (Redline)"
2019,ASTM,"D7472-19 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials"
2019,ASTM,"D7472-19 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials (Redline)"
2019,ASTM,"D5224-12(2019) Standard Practice for  Compression Molding Test Specimens of Thermosetting Molding  Compounds"
2019,ASTM,"D7611/D7611M-19 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2019,ASTM,"D4745-19 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion  Materials Using ASTM Methods"
2019,ASTM,"D4745-19 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion  Materials Using ASTM Methods (Redline)"
2014,ASTM,"D4804-14 Standard Test Method for  Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2019,ASTM,"D6290-19 Standard Test Method for  Color Determination of Plastic Pellets"
2019,ASTM,"D6290-19 Standard Test Method for  Color Determination of Plastic Pellets (Redline)"
2019,ASTM,"D7309-19 Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2019,ASTM,"D6358-19e1 Standard Classification System and Basis for Specification for  Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion  and Blow Molding Materials Using ISO Methods"
2019,ASTM,"D5204-19 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2019,ASTM,"D4659-19 Standard Test Methods for  Polyurethane Raw Materials: Determination of Specific Gravity  of Isocyanates "
2019,ASTM,"D4659-19 Standard Test Methods for  Polyurethane Raw Materials: Determination of Specific Gravity  of Isocyanates  (Redline)"
2019,ASTM,"D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2019,ASTM,"D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics"
2019,ASTM,"D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics (Redline)"
2019,ASTM,"D3517-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pressure Pipe"
2019,ASTM,"D2925-14(2019) Standard Test Method for  Beam Deflection of &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced  Thermosetting Resin) Pipe Under Full Bore Flow"
2019,ASTM,"D4097-19 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant  Tanks"
2019,ASTM,"D4097-19 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant  Tanks (Redline)"
2019,ASTM,"D3840-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Pipe Fittings for Nonpressure Applications"
2019,ASTM,"D3839-14(2019) Standard Guide for Underground Installation of &#x201c;Fiberglass&#x201d; (Glass-Fiber  Reinforced Thermosetting-Resin) Pipe"
2019,ASTM,"D7993-15(2019) Standard Guide for Analyzing Complex Phthalates"
2019,ASTM,"D5155-19 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate  Content of Aromatic Isocyanates"
2019,ASTM,"D5155-19 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate  Content of Aromatic Isocyanates (Redline)"
2019,ASTM,"D7293-19 Standard Specification for  Extruded and Compression-Molded Shapes Made from Polyetherimide  (PEI)"
2019,ASTM,"D7293-19 Standard Specification for  Extruded and Compression-Molded Shapes Made from Polyetherimide  (PEI) (Redline)"
2019,ASTM,"D4877-19 Standard Test Method for  Polyurethane Raw Materials: Determination of APHA Color in  Isocyanates"
2019,ASTM,"D4877-19 Standard Test Method for  Polyurethane Raw Materials: Determination of APHA Color in  Isocyanates (Redline)"
2019,ASTM,"D7194-19 Standard Specification for  Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)"
2019,ASTM,"D7194-19 Standard Specification for  Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) (Redline)"
2019,ASTM,"D7192-19 Standard Test Method for  High Speed Puncture Properties of Plastic Films Using Load  and Displacement Sensors"
2015,ASTM,"D7993-15 Standard Guide for Analyzing Complex Phthalates"
2014,ASTM,"D6713-14 Standard Specification for  Extruded and Compression Molded Shapes Made from Poly&#40;Vinylidene  Fluoride&#41; &#40;PVDF&#41;"
2019,ASTM,"D6713-19 Standard Specification for  Extruded and Compression Molded Shapes Made from Poly(Vinylidene  Fluoride) (PVDF)"
2019,ASTM,"D6867-19 Standard Specification for  Perfluoroalkoxy (PFA)-Fluoropolymer Tubing"
2019,ASTM,"D6867-19 Standard Specification for  Perfluoroalkoxy (PFA)-Fluoropolymer Tubing (Redline)"
2019,ASTM,"D6868-19 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers  as Coatings or Additives with Paper and Other Substrates Designed  to be Aerobically Composted in Municipal or Industrial Facilities"
2019,ASTM,"D3753-19 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes  and Wetwells"
2019,ASTM,"D5748-95(2019) Standard Test Method for  Protrusion Puncture Resistance of Stretch Wrap Film"
2019,ASTM,"D4385-19 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic  Pultruded Products"
2019,ASTM,"D4385-19 Standard Practice for  Classifying Visual Defects in Thermosetting Reinforced Plastic  Pultruded Products (Redline)"
2019,ASTM,"D2105-01(2019) Standard Test Method for  Longitudinal Tensile Properties of &#x201c;Fiberglass&#x201d;  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube"
2019,ASTM,"D3754-19 Standard Specification for  &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer and Industrial Pressure Pipe"
2019,ASTM,"D953-19 Standard Test Method for  Pin-Bearing Strength of Plastics"
2019,ASTM,"D953-19 Standard Test Method for  Pin-Bearing Strength of Plastics (Redline)"
2019,ASTM,"D4226-19 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building  Products"
2019,ASTM,"D4226-19 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building  Products (Redline)"
2019,ASTM,"D6474-19 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight  Averages of Polyolefins by High Temperature Gel Permeation Chromatography"
2019,ASTM,"D5296-19 Standard Test Method for  Molecular Weight Averages and Molecular Weight Distribution  of Polystyrene by High Performance Size-Exclusion Chromatography"
2019,ASTM,"D5296-19 Standard Test Method for  Molecular Weight Averages and Molecular Weight Distribution  of Polystyrene by High Performance Size-Exclusion Chromatography (Redline)"
2019,ASTM,"D3678-19 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions"
2019,ASTM,"D3678-19 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions (Redline)"
2019,ASTM,"D4804-19a Standard Test Method for  Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2019,ASTM,"D5048-19 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2019,ASTM,"D5206-19 Standard Test Method for  Windload Resistance of Rigid Plastic Siding"
2019,ASTM,"D7745-19 Standard Practice for  Testing Pultruded Composites"
2019,ASTM,"D7745-19 Standard Practice for  Testing Pultruded Composites (Redline)"
2019,ASTM,"D5132-19 Standard Test Method for  Horizontal Burning Rate of Polymeric Materials Used in Occupant  Compartments of Motor Vehicles"
2019,ASTM,"D7309-19a Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2020,ASTM,"D7611/D7611M-20 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2020,ASTM,"D8280-20 Standard Test Method for Determination of the Blooming of Brominated Flame Retardants  onto the Surface of Plastic Materials by Ion Chromatography"
2020,ASTM,"D6866-20 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2018,ASTM,"D2517-18 Standard Specification for  Reinforced Epoxy Resin Gas Pressure Pipe and Fittings (Redline)"
2020,ASTM,"D7475-20 Standard Test Method for  Determining the Aerobic Degradation and Anaerobic Biodegradation  of Plastic Materials under Accelerated Bioreactor Landfill Conditions"
2020,ASTM,"D7475-20 Standard Test Method for  Determining the Aerobic Degradation and Anaerobic Biodegradation  of Plastic Materials under Accelerated Bioreactor Landfill Conditions (Redline)"
2020,ASTM,"C581-20 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used  in Glass-Fiber-Reinforced Structures Intended for Liquid Service"
2020,ASTM,"C581-20 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used  in Glass-Fiber-Reinforced Structures Intended for Liquid Service (Redline)"
2020,ASTM,"D6778-20 Standard Classification System and Basis for Specification for  Polyoxymethylene Molding and Extrusion Materials (POM)"
2020,ASTM,"D6778-20 Standard Classification System and Basis for Specification for  Polyoxymethylene Molding and Extrusion Materials (POM) (Redline)"
2020,ASTM,"D7192-20 Standard Test Method for  High Speed Puncture Properties of Plastic Films Using Load  and Displacement Sensors"
2020,ASTM,"D7192-20 Standard Test Method for  High Speed Puncture Properties of Plastic Films Using Load  and Displacement Sensors (Redline)"
2020,ASTM,"D5990-20 Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)"
2000,ASTM,"D5990-00 Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) (Withdrawn 2007)"
2020,ASTM,"D7823-20 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride)  Plastics by Thermal Desorption&#x2014;Gas Chromatography/Mass Spectrometry"
2020,ASTM,"D7823-20 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride)  Plastics by Thermal Desorption&#x2014;Gas Chromatography/Mass Spectrometry (Redline)"
2020,ASTM,"D8133-20 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride)  Plastics by Solvent Extraction&#x2014;Gas Chromatography/Mass Spectrometry"
2020,ASTM,"D3262-20 Standard Specification for &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer Pipe"
2020,ASTM,"D3262-20 Standard Specification for &#x201c;Fiberglass&#x201d; (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer Pipe (Redline)"
2020,ASTM,"D4804-20 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2020,ASTM,"D4986-20 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2020,ASTM,"D5048-20 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2020,ASTM,"D5132-20 Standard Test Method for  Horizontal Burning Rate of Polymeric Materials Used in Occupant  Compartments of Motor Vehicles"
2020,ASTM,"D5132-20 Standard Test Method for  Horizontal Burning Rate of Polymeric Materials Used in Occupant  Compartments of Motor Vehicles (Redline)"
2020,ASTM,"D4663-20 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine  of Isocyanates"
2020,ASTM,"D4663-20 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine  of Isocyanates (Redline)"
2020,ASTM,"D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants  onto the Surface of Plastic Materials by Ion Chromatography"
2020,ASTM,"D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants  onto the Surface of Plastic Materials by Ion Chromatography (Redline)"
2020,ASTM,"D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight  Averages of Polyolefins by High Temperature Gel Permeation Chromatography"
2020,ASTM,"D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight  Averages of Polyolefins by High Temperature Gel Permeation Chromatography (Redline)"
2000,ASTM,"D1694-95(2000) Standard Specification for Threads 60&#176; (Stub) for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Withdrawn 2005)"
1989,ASTM,"D4099-89e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Prime Windows/Sliding Glass Doors"
1995,ASTM,"D4099-95 Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999)"
2004,ASTM,"D4166-99(2004)e1 Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument (Withdrwan 2008)"
1993,ASTM,"D4664-93 Test Method for Polyurethane Raw Materials: Determination of Freezing Point of Toluene Diisocyanate Mixtures (Withdrawn 1998)"
2015,ASTM,"D4756-15 Standard Practice for  Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and  Soffit"
1995,ASTM,"D5140-95 Standard Guide for Testing Polyurethane ""Poured in Place"" Thermal Break Materials (Withdrawn 2004)"
1991,ASTM,"D5152-91 Practice for Water Extraction of Residual Solids from Degraded Plastics for Toxicity Testing (Withdrawn 1998)"
1992,ASTM,"D5209-92 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2004)"
1992,ASTM,"D5247-92 Standard Test Method for Determining the Aerobic Biodegradability of Degradable Plastics by Specific Microorganisms (Withdrawn 2004)"
2002,ASTM,"D5271-02 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System (Withdrawn 2011)"
1992,ASTM,"D5308-92 Methods of Testing Semi-Flexible Cellular Urethanes for Automotive and Similar Energy Absorption Applications (Withdrawn 1998)"
1997,ASTM,"D5318-97 Standard Test Method for Hydrolyzable Chloride in Peroxy Esters and Peroxy Dicarbonates (Withdrawn 2004)"
1997,ASTM,"D5393-97 Test Method for Determination of Fogging Characteristics of Vehicle Interior Trim Materials (Withdrawn 1998)"
1999,ASTM,"D5476-99 Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005)"
2001,ASTM,"D5510-94(2001) Standard Practice for Heat Aging of Oxidatively Degradable Plastics (Withdrawn 2010)"
2015,ASTM,"D5523-15 Standard Test Method for  Polyurethane Raw Materials: Acidity by Argentometric Determination  of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates"
2001,ASTM,"D5524-94(2001)e1 Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography (Withdrawn 2009)"
1999,ASTM,"D5593-99e1 Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005)"
1999,ASTM,"D5676-99 Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004)"
2001,ASTM,"D5815-95(2001)e1 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC) (Withdrawn 2009)"
2002,ASTM,"D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending (Withdrawn 2009)"
1996,ASTM,"D5935-96 Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998)"
1996,ASTM,"D5936-96 Specification for Multipurpose Test Specimens (Withdrawn 1998)"
1996,ASTM,"D5937-96 Standard Test Method for Determination of Tensile Properties and Test Conditions for Moulding and Extrusion Plastics (Withdrawn 1998)"
1996,ASTM,"D5938-96 Standard Test Method for Determination of Tensile Properties (Withdrawn 1998)"
1996,ASTM,"D5939-96 Standard Test Method for Injection Moulding of Test Specimens of Thermoplatic Materials (Withdrawn 1998)"
1996,ASTM,"D5940-96 Standard Test Method for Injection Moulding of Test Specimens of Thermoplatic Materials-Plates (Withdrawn 1998)"
1996,ASTM,"D5941-96 Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998)"
1996,ASTM,"D5942-96 Test Method for Determination of Charpy Impact Strength (Withdrawn 1998)"
1996,ASTM,"D5943-96 Test Method for Determination of Flexural Properties (Withdrawn 1998)"
1996,ASTM,"D5944-96 Test Method for Determination of Temperature of Deflection Under Load (Withdrawn 1998)"
1996,ASTM,"D5945-96 Test Method for Determination of Temperature of Deflection Under Load for Plastics and Ebonite (Withdrawn 1998)"
2002,ASTM,"D5951-96(2002) Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing (Withdrawn 2011)"
2002,ASTM,"D6002-96(2002)e1 Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics (Withdrawn 2011)"
1996,ASTM,"D6003-96 Standard Test Method for Determining Weight Loss From Plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment (Withdrawn 2005)"
1998,ASTM,"D6260-98 Standard Test Method for Gravimetric Determination of Carbon Black in Nylon Materials (PA) (Withdrawn 2004)"
2017,ASTM,"D6342-12(2017)e1 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of  Polyols by Near Infrared (NIR) Spectroscopy"
2001,ASTM,"D6692-01 Standard Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater (Withdrawn 2010)"
2002,ASTM,"D6776-02 Standard Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment (Withdrawn 2011)"
2017,ASTM,"D6835-17 Standard Classification System for  Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials  (TEEE)"
2002,ASTM,"D6852-02 Standard Guide for Determination of Biobased Content, Resources Consumption, and Environmental Profile of Materials and Products (Withdrawn 2011)"
2001,ASTM,"PS106-01 Provisional Standard Specification for Rods and Tubes of Polyethylene (PE)"
2015,ASTM,"D4756-15 Standard Practice for  Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and  Soffit (Redline)"
2017,ASTM,"D5422-17 Standard Test Method for  Measurement of Properties of Thermoplastic Materials by Screw-Extrusion  Capillary Rheometer (Redline)"
2017,ASTM,"D6869-17 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics  Using the Karl Fischer Reaction (the Reaction of Iodine with Water) (Redline)"
2017,ASTM,"D5117-17 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock (Redline)"
2017,ASTM,"D6100-17 Standard Specification for  Extruded, Compression Molded and Injection Molded Polyoxymethylene  Shapes (POM) (Redline)"
2017,ASTM,"D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber  Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross  Sections under Bending (Redline)"
2017,ASTM,"D6287-17 Standard Practice for  Cutting Film and Sheeting Test Specimens (Redline)"
2018,ASTM,"D5511-18 Standard Test Method for  Determining Anaerobic Biodegradation of Plastic Materials Under  High-Solids Anaerobic-Digestion Conditions (Redline)"
2018,ASTM,"D5988-18 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in  Soil (Redline)"
2018,ASTM,"D6110-18 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens  of Plastics (Redline)"
2018,ASTM,"D4754-18 Standard Test Method for  Two-Sided Liquid Extraction of Plastic Materials Using FDA  Migration Cell (Redline)"
2020,ASTM,"D3892-15(2020) Standard Practice for Packaging/Packing of Plastics"
2017,ASTM,"D6272-17e1 Standard Test Method for  Flexural Properties of Unreinforced and Reinforced Plastics  and Electrical Insulating Materials by Four-Point Bending"
2020,ASTM,"D7309-20 Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2019,ASTM,"D4226-19e1 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building  Products"
2020,ASTM,"D7310-20 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical  Sensors"
2020,ASTM,"D5990-20a Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)"
2020,ASTM,"D5990-20a Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK) (Redline)"
2020,ASTM,"D4662-20 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity  Numbers of Polyols "
2020,ASTM,"D4662-20 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity  Numbers of Polyols  (Redline)"
2020,ASTM,"D4526-20 Standard Practice for  Determination of Volatiles in Polymers by Static Headspace  Gas Chromatography"
2020,ASTM,"D4526-20 Standard Practice for  Determination of Volatiles in Polymers by Static Headspace  Gas Chromatography (Redline)"
2020,ASTM,"D4441-20 Standard Specification for  Aqueous Dispersions of Polytetrafluoroethylene"
2020,ASTM,"D4441-20 Standard Specification for  Aqueous Dispersions of Polytetrafluoroethylene (Redline)"
2020,ASTM,"D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame"
2020,ASTM,"D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance  to Burn-Through of Solid Plastics Using a 125-mm Flame (Redline)"
2020,ASTM,"D6394-20 Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)"
2020,ASTM,"D7027-20 Standard Test Method for  Evaluation of Scratch Resistance of Polymeric Coatings and  Plastics Using an Instrumented Scratch Machine"
2020,ASTM,"D7027-20 Standard Test Method for  Evaluation of Scratch Resistance of Polymeric Coatings and  Plastics Using an Instrumented Scratch Machine (Redline)"
2020,ASTM,"D7254-20 Standard Specification for  Polypropylene (PP) Siding"
2020,ASTM,"D6779-20 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2020,ASTM,"D6576-20 Standard Specification for  Flexible Cellular Rubber Chemically Blown"
2020,ASTM,"D6576-20 Standard Specification for  Flexible Cellular Rubber Chemically Blown (Redline)"
2020,ASTM,"D4976-12a(2020) Standard Specification for  Polyethylene Plastics Molding and Extrusion Materials"
2020,ASTM,"D5436-15(2020) Standard Specification for  Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes"
2020,ASTM,"D5926-15(2020) Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent  (DWV), Sewer, Sanitary, and Storm Plumbing Systems"
2020,ASTM,"D5948-05(2020) Standard Specification for Molding Compounds, Thermosetting"
2020,ASTM,"D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes  and Wetwells"
2020,ASTM,"D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes  and Wetwells (Redline)"
2020,ASTM,"D4000-20 Standard Classification System for Specifying Plastic Materials"
2020,ASTM,"D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames  for Small-Scale Burning Tests on Plastic Materials"
2020,ASTM,"D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames  for Small-Scale Burning Tests on Plastic Materials (Redline)"
2020,ASTM,"D7793-20 Standard Specification for Insulated Vinyl Siding"
2021,ASTM,"D4756-15(2021) Standard Practice for  Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and  Soffit"
2021,ASTM,"D5338-15(2021) Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under  Controlled Composting Conditions, Incorporating Thermophilic Temperatures"
2021,ASTM,"D6394-21 Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)"
2021,ASTM,"D4889-21 Standard Test Methods for  Polyurethane Raw Materials: Determination of Viscosity of Crude  or Modified Isocyanates"
2021,ASTM,"D4889-21 Standard Test Methods for  Polyurethane Raw Materials: Determination of Viscosity of Crude  or Modified Isocyanates (Redline)"
2021,ASTM,"D5523-21 Standard Test Method for  Polyurethane Raw Materials: Acidity by Argentometric Determination  of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates"
2021,ASTM,"D5523-21 Standard Test Method for  Polyurethane Raw Materials: Acidity by Argentometric Determination  of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates (Redline)"
2021,ASTM,"D6341-21 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between –30 and  140°F (–34.4 and 60°C)"
2021,ASTM,"D6341-21 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion  of Plastic Lumber and Plastic Lumber Shapes Between –30 and  140°F (–34.4 and 60°C) (Redline)"
2021,ASTM,"D6866-21 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2021,ASTM,"D7997-21 Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam  Formulations"
2021,ASTM,"D7997-21 Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam  Formulations (Redline)"
2021,ASTM,"D4459-21 Standard Practice for  Xenon-Arc Exposure of Plastics Intended for Indoor Applications"
2021,ASTM,"D4459-21 Standard Practice for  Xenon-Arc Exposure of Plastics Intended for Indoor Applications (Redline)"
2021,ASTM,"D5226-21 Standard Practice for  Dissolving Polymer Materials"
2021,ASTM,"D5226-21 Standard Practice for  Dissolving Polymer Materials (Redline)"
2021,ASTM,"D5507-21 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade  Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography"
2021,ASTM,"D5420-21 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimen by Means  of a Striker Impacted by a Falling Weight (Gardner Impact)"
2021,ASTM,"D5420-21 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimen by Means  of a Striker Impacted by a Falling Weight (Gardner Impact) (Redline)"
2021,ASTM,"D5576-00(2021)e1 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin  Copolymers by Infrared Spectrophotometry (FT-IR)"
2021,ASTM,"D6868-21 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers  as Coatings or Additives with Paper and Other Substrates Designed  to be Aerobically Composted in Municipal or Industrial Facilities"
2021,ASTM,"D6868-21 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers  as Coatings or Additives with Paper and Other Substrates Designed  to be Aerobically Composted in Municipal or Industrial Facilities (Redline)"
2021,ASTM,"D8133-21 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride)  Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry"
1972,ASTM,"D2342-68(1972) Method of Test for Determination of Lot-to-Lot Stabilization Uniformity of Propylene Plastics (Withdrawn 1978)"
1975,ASTM,"D3421-75 Recommended Practice for Extraction and Determination of Plasticizer Mixtures from Vinyl Chloride Plastics (Withdrawn 1987)"
1980,ASTM,"D3435-80 Specification for Plastic Containers (Jerry Cans) for Petroleum Products (Withdrawn 1987)"
1977,ASTM,"D3592-77 Recommended Practice for Determining Molecular Weight by Vapor Pressure Osmometry (Withdrawn 1987)"
1985,ASTM,"D3750-79(1985) Practice for Determination of Number-Average Molecular Weight of Polymers by Membrane Osmometry (Withdrawn 1991)"
1981,ASTM,"D3998-81 Test Method for Pendulum-Impace Resistance of Extrusion Plastometer Extrudates (Withdrawn 1989)"
1993,ASTM,"D5437-93 Practice for Weathering of Plastics Under Marine Floating Exposure (Withdrawn 1999)"
1996,ASTM,"D5509-96 Standard Practice for Exposing Plastics to a Simulated Compost Environment (Withdrawn 2002)"
1996,ASTM,"D5512-96 Standard Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor (Withdrawn 2002)"
1994,ASTM,"D5525-94a Standard Practice for Exposing Plastics to a Simulated Active Landfill Environment (Withdrawn 2002)"
1995,ASTM,"D5686-95 Standard Specification for ""Fiberglass"" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type Epoxy Resin, for Condensate Return Lines (Withdrawn 2002)"
1986,ASTM,"E375-75 (1986) Definitions of Terms Relating to Resinography (Withdrawn 1992)"
1982,ASTM,"E858-82 Test Method for Birefringence in Fibers of Circular Cross Section by a Variable Compensator (Withdrawn 1989)"
2021,ASTM,"D6226-21 Standard Test Method for Open Cell Content of Rigid Cellular Plastics"
2021,ASTM,"D6226-21 Standard Test Method for Open Cell Content of Rigid Cellular Plastics (Redline)"
1987,ASTM,"D4665-87 Test Method For Polyurethane Raw Materials: Determination Of Assay Of Isocyanate S (Withdrawn 1992)"
1987,ASTM,"D4666-87E01 Test Method For Polyurethane Raw Materials: Determination Of Amine Equivalent Of Crude Or Modified Isocyanates (Withdrawn 1992)"
1998,ASTM,"D6314-98 Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials (Withdrawn 2002)"
2021,ASTM,"D7473/D7473M-21 Standard Test Method for Weight Attrition of Non-floating Plastic Materials by Open  System Aquarium Incubations"
2021,ASTM,"D7473/D7473M-21 Standard Test Method for Weight Attrition of Non-floating Plastic Materials by Open  System Aquarium Incubations (Redline)"
2021,ASTM,"D2143-21 Standard Test Method for  Cyclic Pressure Strength of Reinforced, Thermosetting Plastic  Pipe"
2021,ASTM,"D2143-21 Standard Test Method for  Cyclic Pressure Strength of Reinforced, Thermosetting Plastic  Pipe (Redline)"
2021,ASTM,"D3982-21 Standard Specification for  Contact Molded “Fiberglass” (Glass Fiber Reinforced  Thermosetting Resin) Ducts"
2021,ASTM,"D3982-21 Standard Specification for  Contact Molded “Fiberglass” (Glass Fiber Reinforced  Thermosetting Resin) Ducts (Redline)"
2021,ASTM,"D7990-21 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature  Rise in Polymeric Siding"
2021,ASTM,"D7990-21 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature  Rise in Polymeric Siding (Redline)"
2021,ASTM,"D8366-21 Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene  Fluoride) PVDF"
2021,ASTM,"D6394-21a Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)"
2021,ASTM,"D6394-21a Standard Classification System for and Basis for Specification for Sulfone Plastics (SP) (Redline)"
2021,ASTM,"D3841-21 Standard Specification for  Glass-Fiber-Reinforced Polyester Plastic Panels"
2021,ASTM,"D3841-21 Standard Specification for  Glass-Fiber-Reinforced Polyester Plastic Panels (Redline)"
2021,ASTM,"D5507-21a Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade  Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography"
2021,ASTM,"D5507-21a Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade  Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography (Redline)"
2021,ASTM,"D7082-21 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage  Pipe"
2021,ASTM,"D7082-21 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage  Pipe (Redline)"
2021,ASTM,"D7309-21 Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2021,ASTM,"D7309-21a Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2021,ASTM,"D2997-21 Standard Specification for  Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2021,ASTM,"D2997-21 Standard Specification for  Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe (Redline)"
2021,ASTM,"D4473-08(2021) Standard Test Method for  Plastics: Dynamic Mechanical Properties: Cure Behavior"
2021,ASTM,"D4549-15(2021) Standard Classification System and Basis for Specification for  Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion  Materials (PS)"
2021,ASTM,"D6360-15(2021) Standard Practice for Enclosed Carbon-Arc Exposures of Plastics"
2021,ASTM,"D4475-21 Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced  Plastic Rods By the Short-Beam Method"
2021,ASTM,"D4475-21 Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced  Plastic Rods By the Short-Beam Method (Redline)"
2021,ASTM,"D4329-21 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics"
2021,ASTM,"D4329-21 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics (Redline)"
2021,ASTM,"D6779-21 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2021,ASTM,"D7856-21 Standard Specification for Color and Appearance Retention of Solid and Variegated Color  Plastic Siding Products using CIELab Color Space"
2021,ASTM,"D7856-21 Standard Specification for Color and Appearance Retention of Solid and Variegated Color  Plastic Siding Products using CIELab Color Space (Redline)"
2021,ASTM,"D5227-21 Standard Test Method for  Measurement of Hexane Extractable Content of Polyolefins"
2021,ASTM,"D5227-21 Standard Test Method for  Measurement of Hexane Extractable Content of Polyolefins (Redline)"
2021,ASTM,"D5279-21 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Torsion"
2021,ASTM,"D5279-21 Standard Test Method for  Plastics: Dynamic Mechanical Properties: In Torsion (Redline)"
1978,ASTM,"D3100-78 Practice for Determination of Alkalinity of Hollow Glass Microspheres"
1978,ASTM,"D3101-78 Practice for Determination of Bulk Density and Packing Factor of Hollow Glass Microspheres"
1978,ASTM,"D3102-78 Practice for Determination of Isostatic Collapse Strength of Hollow Glass Microspheres"
1981,ASTM,"D3220-81e1 Specification for Reinforced Polyterephthalate Thermoplastic Molding and Extrusion Materials"
2021,ASTM,"D3679-21 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2021,ASTM,"D5419-21 Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Threaded Plastic  Closures"
2021,ASTM,"D5419-21 Standard Test Method for  Environmental Stress Crack Resistance (ESCR) of Threaded Plastic  Closures (Redline)"
2021,ASTM,"D7310-21 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical  Sensors"
2021,ASTM,"D7310-21 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical  Sensors (Redline)"
2021,ASTM,"D5336-21 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials"
2021,ASTM,"D4167-21 Standard Specification for  Fiber-Reinforced Plastic Fans and Blowers"
2021,ASTM,"D4167-21 Standard Specification for  Fiber-Reinforced Plastic Fans and Blowers (Redline)"
2021,ASTM,"D4477-21 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2021,ASTM,"D7133-21 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus  CIELAB Color and Yellowness Index of Liquids"
2021,ASTM,"D7133-21 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus  CIELAB Color and Yellowness Index of Liquids (Redline)"
2021,ASTM,"D6713-21 Standard Specification for  Extruded and Compression Molded Shapes Made from Poly(Vinylidene  Fluoride) (PVDF)"
2021,ASTM,"D8366-21a Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene  Fluoride) PVDF"
2021,ASTM,"D8366-21a Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene  Fluoride) PVDF (Redline)"
2021,ASTM,"D7309-21b Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry"
2021,ASTM,"D7309-21b Standard Test Method for  Determining Flammability Characteristics of Plastics and Other  Solid Materials Using Microscale Combustion Calorimetry (Redline)"
2021,ASTM,"D8349-21 Standard Classification System for and Basis of Specifications for Thermoplastic Joining Interface Materials for Creation of Joints  Between Different Materials for the Production of End Items or Parts  that are Intended to be Disassembled and/or Reassembled"
2021,ASTM,"D6988-21 Standard Guide for  Determination of Thickness of Plastic Film Test Specimens"
2021,ASTM,"D6988-21 Standard Guide for  Determination of Thickness of Plastic Film Test Specimens (Redline)"
2021,ASTM,"D6248-21 Standard Test Method for  Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry"
2021,ASTM,"D5071-06(2021) Standard Practice for  Exposure of Photodegradable Plastics in a Xenon Arc Apparatus"
2021,ASTM,"D5272-08(2021) Standard Practice for  Outdoor Exposure Testing of Photodegradable Plastics"
2021,ASTM,"D7254-21 Standard Specification for  Polypropylene (PP) Siding"
2021,ASTM,"D7254-21 Standard Specification for  Polypropylene (PP) Siding (Redline)"
2021,ASTM,"D7793-21 Standard Specification for Insulated Vinyl Siding"
2021,ASTM,"D6400-21 Standard Specification for  Labeling of Plastics Designed to be Aerobically Composted in  Municipal or Industrial Facilities"
2021,ASTM,"D7210-21 Standard Practice for  Extraction of Additives in Polyolefin Plastics"
2021,ASTM,"D7210-21 Standard Practice for  Extraction of Additives in Polyolefin Plastics (Redline)"
2021,ASTM,"D7611/D7611M-21 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification"
2021,ASTM,"D7611/D7611M-21 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification (Redline)"
2021,ASTM,"D4495-21 Standard Test Method for  Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles  by Means of a Falling Weight"
2021,ASTM,"D4495-21 Standard Test Method for  Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles  by Means of a Falling Weight (Redline)"
2022,ASTM,"D4364-13(2022)e1 Standard Practice for  Performing Outdoor Accelerated Weathering Tests of Plastics  Using Concentrated Sunlight"
2022,ASTM,"D4068-17(2022) Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment  Membrane"
2022,ASTM,"D6436-14(2022) Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers"
2022,ASTM,"D7253-22 Standard Test Method for  Polyurethane Raw Materials: Determination of Acidity as Acid  Number for Polyether Polyols"
2022,ASTM,"D7253-22 Standard Test Method for  Polyurethane Raw Materials: Determination of Acidity as Acid  Number for Polyether Polyols (Redline)"
2022,ASTM,"D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers  by Differential Scanning Calorimetry"
2022,ASTM,"D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers  by Differential Scanning Calorimetry (Redline)"
2022,ASTM,"D6437-22 Standard Test Method for  Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols  (Determination of CPR Values of Polyols)"
2022,ASTM,"D6437-22 Standard Test Method for  Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols  (Determination of CPR Values of Polyols) (Redline)"
2022,ASTM,"D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2022,ASTM,"D6662-22 Standard Specification for  Polyolefin-Based Plastic Lumber Decking Boards"
2022,ASTM,"D6662-22 Standard Specification for  Polyolefin-Based Plastic Lumber Decking Boards (Redline)"
2022,ASTM,"D3567-17(2022) Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Pipe and Fittings"
2022,ASTM,"D4969-17(2022) Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric"
2022,ASTM,"D5491-08(2022) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding  and Extrusion Materials"
2022,ASTM,"D6585-17(2022) Standard Specification for  Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or  Tape"
2022,ASTM,"D7193-17(2022) Standard Specification for  Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded  Film or Tape"
2022,ASTM,"D4477-22 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2022,ASTM,"D4986-22 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials"
2022,ASTM,"D4986-22 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials (Redline)"
2022,ASTM,"D5260-22 Standard Classification for  Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer  and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC)  Compounds"
2022,ASTM,"D5260-22 Standard Classification for  Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer  and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC)  Compounds (Redline)"
2022,ASTM,"D6263-22 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride)  (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
2022,ASTM,"D7991-22 Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy  Marine Sediment under Controlled Laboratory Conditions"
2022,ASTM,"D7991-22 Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy  Marine Sediment under Controlled Laboratory Conditions (Redline)"
2022,ASTM,"D4670-17(2022)e1 Standard Test Method for  Polyurethane Raw Materials: Determination of Suspended Matter  in Polyols"
2022,ASTM,"D5208-14(2022) Standard Practice for  Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics"
2022,ASTM,"D6261-14(2022) Standard Specification for  Extruded and Compression Molded Basic Shapes Made from Thermoplastic  Polyester (TPES)"
2022,ASTM,"D7083-16(2022) Standard Practice for  Determination of Monomeric Plasticizers in Poly (Vinyl Chloride)  (PVC) by Gas Chromatography"
2022,ASTM,"D6342-22 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of  Polyols by Near Infrared (NIR) Spectroscopy"
2022,ASTM,"D6342-22 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of  Polyols by Near Infrared (NIR) Spectroscopy (Redline)"
2022,ASTM,"D7252-22 Standard Test Method for  Polyurethane Raw Materials: Determination of Monomer and Isomers  in Isocyanates"
2022,ASTM,"D7252-22 Standard Test Method for  Polyurethane Raw Materials: Determination of Monomer and Isomers  in Isocyanates (Redline)"
2022,ASTM,"D4024-22 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges"
2022,ASTM,"D4024-22 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges (Redline)"
2022,ASTM,"D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials"
2022,ASTM,"D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials (Redline)"
2022,ASTM,"D5870-22 Standard Practice for Calculating Property Retention Index of Plastics"
2022,ASTM,"D5870-22 Standard Practice for Calculating Property Retention Index of Plastics (Redline)"
2022,ASTM,"D6783-05a(2022) Standard Specification for Polymer Concrete Pipe"
2022,ASTM,"D7774-22 Standard Test Method for  Flexural Fatigue Properties of Plastics"
2022,ASTM,"D7774-22 Standard Test Method for  Flexural Fatigue Properties of Plastics (Redline)"
2022,ASTM,"D7791-22 Standard Test Method for  Uniaxial Fatigue Properties of Plastics"
2022,ASTM,"D7791-22 Standard Test Method for  Uniaxial Fatigue Properties of Plastics (Redline)"
2022,ASTM,"D5672/D5672M-22 Standard Test Method for  Testing Flexible Cellular Materials Measurement of Indentation  Force Deflection Using a 25-mm [1-in.] Deflection Technique"
2022,ASTM,"D5672/D5672M-22 Standard Test Method for  Testing Flexible Cellular Materials Measurement of Indentation  Force Deflection Using a 25-mm [1-in.] Deflection Technique (Redline)"
2022,ASTM,"D4634-16(2022) Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)"
2022,ASTM,"D4551-22 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment  Membrane"
2022,ASTM,"D4551-22 Standard Specification for  Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment  Membrane (Redline)"
2022,ASTM,"D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential  Viscometer"
2022,ASTM,"D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential  Viscometer (Redline)"
2022,ASTM,"D8033-22 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials"
2022,ASTM,"D8033-22 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials (Redline)"
2022,ASTM,"D5336-22 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials"
2022,ASTM,"D5336-22 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials (Redline)"
2022,ASTM,"D5630-22 Standard Test Method for Ash Content in Plastics"
2022,ASTM,"D5045-14(2022) Standard Test Methods for  Plane-Strain Fracture Toughness and Strain Energy Release Rate  of Plastic Materials"
2022,ASTM,"D1494-22 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels"
2022,ASTM,"D1494-22 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels (Redline)"
2022,ASTM,"D5204-22 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials"
2022,ASTM,"D5204-22 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials (Redline)"
2022,ASTM,"D5319-22 Standard Specification for  Glass-Fiber Reinforced Polyester Wall and Ceiling Panels"
2022,ASTM,"D5319-22 Standard Specification for  Glass-Fiber Reinforced Polyester Wall and Ceiling Panels (Redline)"
2022,ASTM,"D6263-22a Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride)  (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
2022,ASTM,"D7486-22 Standard Test Method for  Measurement of Fines and Dust Particles on Plastic Pellets  by Wet Analysis"
2022,ASTM,"D7486-22 Standard Test Method for  Measurement of Fines and Dust Particles on Plastic Pellets  by Wet Analysis (Redline)"
2022,ASTM,"D2992-22 Standard Practice for  Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass”  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2023,ASTM,"D4673-23 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics  and Alloys Molding and Extrusion Materials"
2023,ASTM,"D4673-23 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics  and Alloys Molding and Extrusion Materials (Redline)"
2023,ASTM,"D4661-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates"
2023,ASTM,"D4661-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine  in Isocyanates (Redline)"
2023,ASTM,"D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid  Plastics"
2023,ASTM,"D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid  Plastics (Redline)"
2023,ASTM,"D5629-23 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity  Aromatic Isocyanates and Polyurethane Prepolymers"
2023,ASTM,"D5629-23 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity  Aromatic Isocyanates and Polyurethane Prepolymers (Redline)"
2023,ASTM,"D6400-23 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in  Municipal or Industrial Facilities"
2023,ASTM,"D6400-23 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in  Municipal or Industrial Facilities (Redline)"
2022,ASTM,"D6400-22 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in  Municipal or Industrial Facilities"
2023,ASTM,"D7258-23 Standard Specification for Polymeric Piles"
2023,ASTM,"D7258-23 Standard Specification for Polymeric Piles (Redline)"
2023,ASTM,"D7568-23 Standard Specification for  Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor  Applications"
2023,ASTM,"D7568-23 Standard Specification for  Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor  Applications (Redline)"
2023,ASTM,"D7711-23 Standard Guide for Description of Polymer Pellet Defects"
2023,ASTM,"D7711-23 Standard Guide for Description of Polymer Pellet Defects (Redline)"
2023,ASTM,"D5991-23 Standard Practice for  Separation and Identification of Poly(Vinyl Chloride) (PVC)  Contamination in Poly(Ethylene Terephthalate) (PET) Flake"
2023,ASTM,"D5991-23 Standard Practice for  Separation and Identification of Poly(Vinyl Chloride) (PVC)  Contamination in Poly(Ethylene Terephthalate) (PET) Flake (Redline)"
2023,ASTM,"D6263-23 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride)  (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)"
2023,ASTM,"D6263-23 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride)  (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) (Redline)"
2023,ASTM,"D6265-23 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter  Test"
2023,ASTM,"D6265-23 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter  Test (Redline)"
2023,ASTM,"D6288-23 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing"
2023,ASTM,"D6288-23 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing (Redline)"
2023,ASTM,"D5575-18(2023) Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated  Monomers"
2023,ASTM,"D5138-23 Standard Classification System and Basis for Specification for  Liquid Crystal Polymers Molding and Extrusion Materials (LCP)"
2023,ASTM,"D5138-23 Standard Classification System and Basis for Specification for  Liquid Crystal Polymers Molding and Extrusion Materials (LCP) (Redline)"
2023,ASTM,"D4000-23 Standard Classification System for Specifying Plastic Materials"
2023,ASTM,"D4000-23 Standard Classification System for Specifying Plastic Materials (Redline)"
2023,ASTM,"D6779-23 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)"
2023,ASTM,"D6779-23 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) (Redline)"
2023,ASTM,"C582-23 Standard Specification for  Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates  for Corrosion-Resistant Equipment"
2023,ASTM,"C582-23 Standard Specification for  Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates  for Corrosion-Resistant Equipment (Redline)"
2023,ASTM,"D8133-23 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride)  Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry"
2023,ASTM,"D8133-23 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride)  Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry (Redline)"
2023,ASTM,"D4878-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols"
2023,ASTM,"D4878-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols (Redline)"
2023,ASTM,"D5421-23 Standard Specification for  Contact Molded “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges"
2023,ASTM,"D5421-23 Standard Specification for  Contact Molded “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Flanges (Redline)"
2023,ASTM,"D7211-23 Standard Specification for  Parts Machined from Polychlorotrifluoroethylene (PCTFE) and  Intended for General Use"
2023,ASTM,"D7211-23 Standard Specification for  Parts Machined from Polychlorotrifluoroethylene (PCTFE) and  Intended for General Use (Redline)"
2023,ASTM,"D8484-23 Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials  Used as Exterior Wall Coverings"
2023,ASTM,"D4895-18(2023) Standard Specification for  Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion"
1986,ASTM,"E375-75 (1986) Definitions of Terms Relating to Resinography (Withdrawn 1992)"
2023,ASTM,"D6117-23 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes"
2023,ASTM,"D6117-23 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes (Redline)"
2023,ASTM,"D3681-23 Standard Test Method for  Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced  Thermosetting-Resin) Pipe in a Deflected Condition"
2023,ASTM,"D3681-23 Standard Test Method for  Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced  Thermosetting-Resin) Pipe in a Deflected Condition (Redline)"
2023,ASTM,"D5365-23 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass”  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2023,ASTM,"D5365-23 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass”  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Redline)"
2023,ASTM,"D6041-23 Standard Specification for  Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Corrosion Resistant Pipe and Fittings"
2023,ASTM,"D6041-23 Standard Specification for  Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Corrosion Resistant Pipe and Fittings (Redline)"
2023,ASTM,"D6262-23 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes  of Poly(aryl ether ketone) (PAEK)"
2023,ASTM,"D6262-23 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes  of Poly(aryl ether ketone) (PAEK) (Redline)"
2023,ASTM,"D6835-23 Standard Classification System for  Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials  (TEEE)"
2023,ASTM,"D6835-23 Standard Classification System for  Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials  (TEEE) (Redline)"
2023,ASTM,"D8501-23 Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK) Materials for Molding,  Extrusion, Composites, Powder Coating and Additive Manufacturing"
2023,ASTM,"D2517-18(2023) Standard Specification for  Reinforced Epoxy Resin Gas Pressure Pipe and Fittings"
2023,ASTM,"D5677-17(2023) Standard Specification for  Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe  and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine  Fuel Lines"
2023,ASTM,"D2996-23 Standard Specification for  Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe"
2023,ASTM,"D2996-23 Standard Specification for  Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting-Resin) Pipe (Redline)"
2023,ASTM,"D2924-12(2023) Standard Test Method for External Pressure Resistance of “Fiberglass”<brk  /> (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2023,ASTM,"D4397-16(2023) Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural  Applications"
2023,ASTM,"D5047-17(2023) Standard Specification for  Polyethylene Terephthalate Film and Sheeting"
2023,ASTM,"D5508-23 Standard Test Method for  Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile  Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary  Gas Chromatography (HS-CGC)"
2023,ASTM,"D5508-23 Standard Test Method for  Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile  Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary  Gas Chromatography (HS-CGC) (Redline)"
2023,ASTM,"D5675-13(2023) Standard Classification for  Low Molecular Weight PTFE and FEP Micronized Powders"
2023,ASTM,"D6040-18(2023) Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene  (PTFE) Extruded Film or Tape"
2023,ASTM,"D8065/D8065M-16(2023) Standard Classification System and Basis for Specification for Specifying Plastic Films"
2023,ASTM,"D4440-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology"
2023,ASTM,"D4440-23 Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology (Redline)"
2023,ASTM,"D5026-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension"
2023,ASTM,"D5026-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension (Redline)"
2023,ASTM,"D5418-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever  Beam)"
2023,ASTM,"D5418-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever  Beam) (Redline)"
2023,ASTM,"D5814-23 Standard Practice for  Determination of Contamination in Recycled Poly(Ethylene Terephthalate)  (PET) Flakes and Chips Using a Plaque Test"
2023,ASTM,"D5814-23 Standard Practice for  Determination of Contamination in Recycled Poly(Ethylene Terephthalate)  (PET) Flakes and Chips Using a Plaque Test (Redline)"
2023,ASTM,"D8501-23a Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK) Materials for Molding,  Extrusion, Composites, Powder Coating and Additive Manufacturing"
2023,ASTM,"D8501-23a Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK) Materials for Molding,  Extrusion, Composites, Powder Coating and Additive Manufacturing (Redline)"
2023,ASTM,"D6112-23 Standard Test Methods for  Compressive and Flexural Creep and Creep-Rupture of Plastic  Lumber and Shapes"
2023,ASTM,"D6112-23 Standard Test Methods for  Compressive and Flexural Creep and Creep-Rupture of Plastic  Lumber and Shapes (Redline)"
2023,ASTM,"D8540-23 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the  Edgewise Position Using a Dry Bath"
2023,ASTM,"D8539-23 Standard Guide for Measurement of Polyolefin Properties Using TD-NMR Relaxometry"
2023,ASTM,"D8019-23 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength  of Fiber Reinforced Polymer Crossarms Assembled with Center Mount  Brackets"
2023,ASTM,"D8019-23 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength  of Fiber Reinforced Polymer Crossarms Assembled with Center Mount  Brackets (Redline)"
2023,ASTM,"D6042-23 Standard Test Method for  Determination of Phenolic Antioxidants and Erucamide Slip Additives  in Polypropylene Homopolymer Formulations Using Liquid Chromatography  (LC)"
2023,ASTM,"D6042-23 Standard Test Method for  Determination of Phenolic Antioxidants and Erucamide Slip Additives  in Polypropylene Homopolymer Formulations Using Liquid Chromatography  (LC) (Redline)"
2024,ASTM,"D6954-24 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment  by a Combination of Oxidation and Biodegradation"
2024,ASTM,"D6954-24 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment  by a Combination of Oxidation and Biodegradation (Redline)"
2023,ASTM,"D7792/D7792M-23 Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer  (FRP) Composites Used in Structural Designs"
2023,ASTM,"D7792/D7792M-23 Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer  (FRP) Composites Used in Structural Designs (Redline)"
2023,ASTM,"D7992/D7992M-23 Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded  Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs"
2023,ASTM,"D7992/D7992M-23 Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded  Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs (Redline)"
2024,ASTM,"D6866-24 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis"
2024,ASTM,"D6866-24 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous  Samples Using Radiocarbon Analysis (Redline)"
2024,ASTM,"D5492-17(2024) Standard Test Method for  Determination of Xylene Solubles in Propylene Plastics"
2024,ASTM,"D5857-17(2024) Standard Specification for  Polypropylene Injection and Extrusion Materials Using ISO Protocol  and Methodology"
2024,ASTM,"D2924-24 Standard Test Method for External Pressure Resistance of “Fiberglass”<brk  /> (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe"
2024,ASTM,"D2924-24 Standard Test Method for External Pressure Resistance of “Fiberglass”<brk  /> (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Redline)"
2024,ASTM,"D4803-24 Standard Test Method for  Predicting Heat Buildup in PVC Building Products"
2024,ASTM,"D4803-24 Standard Test Method for  Predicting Heat Buildup in PVC Building Products (Redline)"
2024,ASTM,"D6979-24 Standard Test Method for  Polyurethane Raw Materials: Determination of Basicity in Polyols,  Expressed as Percent Nitrogen"
2024,ASTM,"D6979-24 Standard Test Method for  Polyurethane Raw Materials: Determination of Basicity in Polyols,  Expressed as Percent Nitrogen (Redline)"
2024,ASTM,"D7436-17(2024) Standard Classification System for  Unfilled Polyethylene Plastics Molding and Extrusion Materials  with a Fractional Melt Index Using ISO Protocol and Methodology"
2024,ASTM,"D7487-24 Standard Practice for  Polyurethane Raw Materials: Polyurethane Foam Cup Test"
2024,ASTM,"D7487-24 Standard Practice for  Polyurethane Raw Materials: Polyurethane Foam Cup Test (Redline)"
2024,ASTM,"D4669-24 Standard Test Method for  Polyurethane Raw Materials: Determination of Specific Gravity  of Polyols"
2024,ASTM,"D4669-24 Standard Test Method for  Polyurethane Raw Materials: Determination of Specific Gravity  of Polyols (Redline)"
2024,ASTM,"D6099-24 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate  to High Acidity Aromatic Isocyanates"
2024,ASTM,"D6099-24 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate  to High Acidity Aromatic Isocyanates (Redline)"
2024,ASTM,"D6108-24 Standard Test Method for  Compressive Properties of Plastic Lumber and Shapes"
2024,ASTM,"D6108-24 Standard Test Method for  Compressive Properties of Plastic Lumber and Shapes (Redline)"
2024,ASTM,"D6109-24 Standard Test Methods for  Flexural Properties of Unreinforced and Reinforced Plastic  Lumber and Related Products"
2024,ASTM,"D6109-24 Standard Test Methods for  Flexural Properties of Unreinforced and Reinforced Plastic  Lumber and Related Products (Redline)"
2024,ASTM,"D6111-24 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement"
2024,ASTM,"D6111-24 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes  by Displacement (Redline)"
2024,ASTM,"D4726-24 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions  Used for Assembled Windows and Doors"
2024,ASTM,"D4726-24 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions  Used for Assembled Windows and Doors (Redline)"
2024,ASTM,"D5205-24 Standard Classification System and Basis for Specification for  Polyetherimide (PEI) Molding and Extrusion Materials"
2024,ASTM,"D5205-24 Standard Classification System and Basis for Specification for  Polyetherimide (PEI) Molding and Extrusion Materials (Redline)"
2024,ASTM,"D5364-14(2024) Standard Guide for  Design, Fabrication, and Erection of Fiberglass Reinforced  (FRP) Plastic Chimney Liners with Coal-Fired Units"
2024,ASTM,"D4477-24 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit"
2024,ASTM,"D4477-24 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit (Redline)"
2024,ASTM,"D5594-18a(2024) Standard Test Method for  Determination of the Vinyl Acetate Content of Ethylene-Vinyl  Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy  (FT-IR)"
2024,ASTM,"D6150-24 Standard Test Method for  Estimating Processing Losses of Plastisols and Organosols Due  to Volatility"
2024,ASTM,"D6150-24 Standard Test Method for  Estimating Processing Losses of Plastisols and Organosols Due  to Volatility (Redline)"
2024,ASTM,"D7194-19(2024) Standard Specification for  Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)"
2024,ASTM,"D7471-19(2024) Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials"
2024,ASTM,"D7472-19(2024) Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials"
2024,ASTM,"D3679-24 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding"
2024,ASTM,"D3679-24 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding (Redline)"
2024,ASTM,"D5206-24 Standard Test Method for  Windload Resistance of Rigid Plastic Siding"
2024,ASTM,"D5206-24 Standard Test Method for  Windload Resistance of Rigid Plastic Siding (Redline)"
2024,ASTM,"D7793-24 Standard Specification for Insulated Vinyl Siding"
2024,ASTM,"D7793-24 Standard Specification for Insulated Vinyl Siding (Redline)"
2024,ASTM,"D7445-24 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing  (Backed Vinyl Siding)"
2024,ASTM,"D7445-24 Standard Specification for  Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing  (Backed Vinyl Siding) (Redline)"
2024,ASTM,"D4745-19(2024) Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion  Materials Using ASTM Methods"
2024,ASTM,"D5947-24 Standard Test Methods for  Physical Dimensions of Solid Plastics Specimens"
2024,ASTM,"D5947-24 Standard Test Methods for  Physical Dimensions of Solid Plastics Specimens (Redline)"
2024,ASTM,"D6713-24 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene  Fluoride) (PVDF)"
2024,ASTM,"D6713-24 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene  Fluoride) (PVDF) (Redline)"
2024,ASTM,"D7191-24 Standard Test Method for  Determination of Moisture in Plastics by Relative Humidity  Sensor"
2024,ASTM,"D7191-24 Standard Test Method for  Determination of Moisture in Plastics by Relative Humidity  Sensor (Redline)"
2024,ASTM,"D2992-24 Standard Practice for  Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass”  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings"
2024,ASTM,"D2992-24 Standard Practice for  Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass”  (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings (Redline)"
2024,ASTM,"D3517-24 Standard Specification for  “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin)  Pressure Pipe"
2024,ASTM,"D3517-24 Standard Specification for  “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin)  Pressure Pipe (Redline)"
2024,ASTM,"D6691-24 Standard Test Method for  Determining Aerobic Biodegradation of Plastic Materials in  the Marine Environment by a Defined Microbial Consortium or Natural  Sea Water Inoculum"
2024,ASTM,"D6691-24a Standard Test Method for  Determining Aerobic Biodegradation of Plastic Materials in  the Marine Environment by a Defined Microbial Consortium or Natural  Sea Water Inoculum"
2024,ASTM,"D6691-24a Standard Test Method for  Determining Aerobic Biodegradation of Plastic Materials in  the Marine Environment by a Defined Microbial Consortium or Natural  Sea Water Inoculum (Redline)"
2024,ASTM,"D6247-18(2024) Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength  Dispersive X-ray Fluorescence Spectrometry"
2024,ASTM,"D3754-24 Standard Specification for  “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer and Industrial Pressure Pipe"
2024,ASTM,"D3754-24 Standard Specification for  “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin)  Sewer and Industrial Pressure Pipe (Redline)"
2024,ASTM,"D3840-24 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin)  Pipe Fittings for Nonpressure Applications"
2024,ASTM,"D3840-24 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin)  Pipe Fittings for Nonpressure Applications (Redline)"
2024,ASTM,"D4161-24 Standard Specification for  “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin)  Pipe Joints Using Flexible Elastomeric Seals"
2024,ASTM,"D4161-24 Standard Specification for  “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin)  Pipe Joints Using Flexible Elastomeric Seals (Redline)"
2024,ASTM,"D4890-24 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA  (Platinum-Cobalt) Color of Polyols"
2024,ASTM,"D4890-24 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA  (Platinum-Cobalt) Color of Polyols (Redline)"
2024,ASTM,"D2925-24 Standard Test Method for  Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Pipe Under Full Bore Flow"
2024,ASTM,"D2925-24 Standard Test Method for  Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced  Thermosetting Resin) Pipe Under Full Bore Flow (Redline)"
2024,ASTM,"D5017-24 Standard Test Method for  Determination of Linear Low Density Polyethylene (LLDPE) Composition  by Carbon-13 Nuclear Magnetic Resonance"
2024,ASTM,"D5017-24 Standard Test Method for  Determination of Linear Low Density Polyethylene (LLDPE) Composition  by Carbon-13 Nuclear Magnetic Resonance (Redline)"
2024,ASTM,"D5628-24 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimens by Means  of a Falling Dart (Tup or Falling Mass)"
2024,ASTM,"D5628-24 Standard Test Method for  Impact Resistance of Flat, Rigid Plastic Specimens by Means  of a Falling Dart (Tup or Falling Mass) (Redline)"