ASTM A537/A537M-95(2000)
Historical Standard: ASTM A537/A537M-95(2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
SUPERSEDED (see Active link, below)
ASTM A537 / A537M
1. Scope
1.1 This specification covers heat-treated carbon-manganese-silicon steel plates intended for fusion welded pressure vessels and structures.
1.2 Material under this specification is available in the following three classes:
| Yield | Tensile | |||
| Strength, | Strength, | |||
| Heat | Thickness, | min, ksi | min, ksi | |
| Class | Treatment | [MPa] | [MPa] | |
| 1 | Normalized | 21/2 in. and under[65 mm and under] | 50 [345] | 70 [485] |
| Over 21/2 to 4 in.[Over 65 to 100 mm] | 45[310] | 65[450] | ||
| 2 | Quenched and tempered | 21/2 in. and under[65 mm and under] | 60 [415] | 80 [550] |
| Over 21/2 to 4 in.[Over 65 to 100 mm] | 55[380] | 75[515] | ||
| Over 4 to 6 in.[Over 100 to 150 mm] | 46[315] | 70[485] | ||
| 3 | Quenched and tempered | 21/2 in. and under[65 mm and under] | 55 [380] | 80 [550] |
| Over 21/2 to 4 in.[Over 65 to 100 mm] | 50[345] | 75[515] | ||
| Over 4 to 6 in.[Over 100 to 150 mm] | 40[275] | 70[485] |
1.3 The maximum thickness of plates furnished under this specification is 4 in. [100 mm] for Class 1 and 6 in. [150 mm] for Class 2 and Class 3.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A20/A20M Specification for General Requirements for Steel Plates for Pressure Vessels
A435/A435M Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A577/A577M Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
Keywords
carbon steel plate; pressure containing parts; pressure vessel steels; steel plates for pressure vessel application; Carbon-manganese steel--specifications; Carbon steel plate--specifications; Fusion-welded materials/applications--specifications;
ICS Code
ICS Number Code 77.140.50 (Flat steel products and semi-products)
DOI: 10.1520/A0537_A0537M-95R00
ASTM International is a member of CrossRef.
