ASTM A663/A663M-89(2006)
Historical Standard: ASTM A663/A663M-89(2006) tandard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
SUPERSEDED (see Active link, below)
ASTM A663 / A663M
1. Scope
1.1 This specification covers hot-wrought merchant quality carbon steel bars and bar size shapes produced to mechanical property requirements and intended for noncritical constructional applications (see ).
1.2 Merchant quality hot-wrought steel bar is available in the following ranges of size and section:
1.2.1 Rounds, squares, and hexagons with diameters or distance across flats under 3 in. [75 mm].
1.2.2 Bar size shapes with maximum dimensions under 3 in. [75 mm].
1.2.3 Other bar sections with weight per foot under 40.84 lb/ft [60.78 kg/m].
1.2.4 Flats 6 in. [152 mm] or under in width, over 0.203 in. [over 5 mm in thickness up to 150 mm in width] in thickness, and under 40.84 lb/ft or 12 in. 2 [77.4 cm 2 ] in cross-sectional area.
1.2.5 Flats over 6 in. to 8 in., inclusive in width, 0.230 in. and over [over 6 mm in thickness and over 50 mm through 200 mm in width] in thickness and under 40.84 lb/ft [60.78 kg/m] or 12 in. 2 [77.4 cm 2 ] in cross-sectional area.
1.2.6 Hot-wrought merchant quality carbon steel bars subject to mechanical property requirements are hot wrought in straight lengths only.
1.3 Some applications may require one or more of the available designations shown under supplementary requirements. Note 1Special quality hot-wrought carbon steel bars subject to mechanical property requirements are covered in Specification A 675/A 675M.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A29/A29M Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A675/A675M Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
E290 Test Methods for Bend Testing of Material for Ductility
Keywords
carbon steel bars; merchant quality steel bars; steel bars; Mechanical properties; Merchant quality steel bars; Carbon steel bars/shapes--specifications
ICS Code
ICS Number Code 77.140.60 (Steel bars and rods)
DOI: 10.1520/A0663_A0663M-89R06
ASTM International is a member of CrossRef.
