Abstract

This specification covers the standard specification for medium carbon bearing quality steel to be used in the manufacture of anti-friction bearings. The bearings shall conform to the required chemical composition for carbon, phosphorus, manganese, sulfur, silicon, chromium, molybdenum, vanadium, copper, oxygen and aluminum. Requirement for dimensional tolerances of hot-rolled or hot-rolled and annealed bars, in straight lengths or coils, and cold-finished bars and larger in diameter furnished shall conform to the specified size, shape and tolerances. The grain size of the material shall conform to the required size, otherwise it shall be normalized and retested. Decarburization and surface imperfection shall not exceed the limit in the specified values. Material may be ordered as hot rolled or thermally treated. No hardness limits shall apply for as-hot-rolled materials.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers medium carbon bearing quality steel to be used in the manufacture of anti-friction bearings.

1.2 Supplementary requirements of an optional nature are provided and when desired shall be so stated in the order.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

A29/A29M Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for

A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

E45 Test Methods for Determining the Inclusion Content of Steel

E112 Test Methods for Determining Average Grain Size

E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

E1019 Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques

E1077 Test Methods for Estimating the Depth of Decarburization of Steel Specimens

ISO Standard

Keywords

Anti-friction bearings--specifications; Ball/roller bearings--specifications; Carbon steel--specifications;

ICS Code

ICS Number Code 77.140.10 (Heat-treatable steels)

DOI: 10.1520/A0866-09

ASTM International is a member of CrossRef.

ASTM A866