ASTM B395/B395M-02
Historical Standard: ASTM B395/B395M-02 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
SUPERSEDED (see Active link, below)
ASTM B395 / B395M
1. Scope
1.1 This specification establishes the requirements for condenser, evaporator, and heat exchanger U-bends that are manufactured from seamless copper and copper alloy tube.
1.2 UnitsThe values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems could result in nonconformance with the specification.
1.3 This specification is applicable to product 2 in. [50 mm] or less, inclusive, in diameter.
1.4 The product shall be produced from one of the following coppers or copper alloys, as specified in the ordering information:
Designations listed in Classification B 224.| Copper or | ||
| Copper Alloy | Previously Used | |
| UNS No. | Designation | Type of Metal |
| C10200 | OF | oxygen-free without residual deoxidants |
| C10300 | ... | oxygen-free, extra low phosphorus |
| C10800 | ... | oxygen-free, low phosphorus |
| C12000 | DLP | phosphorized, low residual phosphorus |
| C12200 | DHP | phosphorized, high residual phosphorus |
| C14200 | DPA | phosphorized, arsenical |
| C19200 | ... | phosphorized, 1 % iron |
| C23000 | ... | red brass |
| C44300 | Type B | admiralty metal |
| C44400 | Type C | admiralty metal |
| C44500 | Type D | admiralty metal |
| C60800 | ... | aluminum bronze |
| C68700 | Type B | aluminum brass |
| C70400 | ... | 95-5 copper-nickel |
| C70600 | ... | 90-10 copper-nickel |
| C70620 | ... | 90-10 copper-nickel-(modified for welding) |
| C71000 | ... | 80-20 copper-nickel |
| C71500 | ... | 70-30 copper-nickel |
| C71520 | ... | 70-30 copper-nickel-(modified for welding) |
| C72200 | ... | copper-nickel |
1.5 The following pertains only to the test method described in Sections 11 and 15, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
B153 Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B154 Test Method for Mercurous Nitrate Test for Copper Alloys
B224 Classification of Coppers
B601 Classification for Temper Designations for Copper and Copper Alloys--Wrought and Cast
B846 Terminology for Copper and Copper Alloys
B858 Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
B900 Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
E3 Guide for Preparation of Metallographic Specimens
E8 Test Methods for Tension Testing of Metallic Materials
E8M Test Methods for Tension Testing of Metallic Materials [Metric]
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E53 Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
E62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E112 Test Methods for Determining Average Grain Size
E118 Test Methods for Chemical Analysis of Copper-Chromium Alloys
E243 Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes
E255 Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E478 Test Methods for Chemical Analysis of Copper Alloys
Keywords
condenser tube; copper; copper alloy; dual-gage; evaporator; heat exchanger; U-bend tube; C10200; C10300; C10800; C12000; C12200; C14200; C19200; C23000; C44300; C44400; C44500; C60800; C68700; C70400; C70600; C70620; C71000; C71500; C71520; C72200; Aluminum bronzes--specifications; Brass pipe/tube--specifications; Bronze pipe/tube--specifications; Condenser and heat exchanger systems--copper/copper alloy; Seamless Cu/Cu alloy tube--specifications; UNS C10200--tube (for condensers/heat exchangers); UNS C10300--tube (for condensers/heat exchangers); UNS C10800--tube (for condensers/heat exchangers); UNS C12000--tube (for condensers/heat exchangers); UNS C12200--tube (for condensers/heat exchangers); UNS C14200--tube (for condensers/heat exchangers); UNS C70400 (copper-nickel, 5 %); UNS C19200--tube (seamless) for condensers/heat exchangers; UNS C23000--pipe/tube (seamless/welded); UNS C44300 (admiralty, arsenical)--tube; UNS C44400 (admiralty, antimonial (Cu-Zn-Sn)); UNS C44500 (admiralty, phosphorized (Cu-Zn-Sn))--tube; UNS C60800 (aluminum bronze); UNS C70600 (Cu-Ni)--tube (for condensers/heat exchangers); UNS C68700 (aluminum brass, aresenical); UNS C71000--tube (for condensers/heat exchangers); UNS C71500--tube (for condensers/heat exchangers); UNS C72200 (copper nickel)--tube;
ICS Code
ICS Number Code 23.040.15 (Non-ferrous metal pipes)
DOI: 10.1520/B0395_B0395M-02
ASTM International is a member of CrossRef.
