1. Scope

1.1 This specification covers solder metal alloys (commonly known as soft solders), including zinc-aluminum, zinc-aluminum-copper, zinc-tin, zinc-tin-copper, zinc-cadmium-tin, zinc-cadmium, tin-zinc, cadmium-zinc, cadmium-zinc-silver, and cadmium-silver, used for the purpose of joining together two or more metals at temperatures below their melting points.

1.1.1 Certain alloys are also used in Thermal Spray Wire by the electronics industry (as noted in the Annex part of this specification). B833 covers Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) used primarily for the corrosion protection of steel (as noted in the Annex part of this specification).

1.1.2 Tin base alloys are included in this specification because their use in the electronics industry is different than the major use of the tin and lead solder compositions specified in B32.

1.1.3 These solders include alloys having a nominal liquidus temperature not exceeding 850 ^o F (455 ^o C).

1.1.4 This specification includes solder in the form of solid bars, ingots, powder and special forms, and in the form of solid wire, and solder paste.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 Toxicity --Warning: Soluble and respirable forms of cadmium may be harmful to human health and the environment in certain forms and concentrations. Therefore, ingestion and inhalation of cadmium should be controlled under the appropriate regulations of the U.S. Occupational Safety and Health Administration (OSHA). Cadmium-containing alloys and coatings should not be used on articles that will contact food or beverages, or for dental and other equipment that is normally inserted in the mouth. Similarly, if articles using cadmium-containing alloys or coatings are welded, soldered, brazed, ground, flame-cut, or otherwise heated during fabrication, adequate ventilation must be provided to maintain occupational cadmium exposure below the OSHA Permissible Exposure Level (PEL).

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Data Sheet for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

B32 Specification for Solder Metal

B833 Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel

B899 Terminology Relating to Non-ferrous Metals and Alloys

B943 Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications

E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E46 Test Methods for Chemical Analysis of Lead- and Tin-Base Solder

E51 Method for Spectrographic Analysis of Tin Alloys by the Powder Technique

E55 Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

E87 Methods for Chemical Analysis of Lead, Tin, Antimony and Their Alloys (Photometric Method)

E88 Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition

E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

E536 Test Methods for Chemical Analysis of Zinc and Zinc Alloys

ISO Standards

Military Standard

Federal Standard

Keywords

bar; ingot; zinc-aluminum alloys; zinc-aluminum-copper alloys; tin-zinc alloys; zinc-tin alloys; zinc-tin-copper alloys; zinc-cadmium alloys; tin-cadmium-zinc alloys; cadmium-zinc alloys; cadmium-zinc-silver alloys; cadmium-silver alloys; powder; ribbon; solder alloy; solder metal; solder uses; wire;

ICS Code

ICS Number Code 77.120.60 (Lead, zinc, tin and their alloys)

DOI: 10.1520/B0907-01E01

ASTM International is a member of CrossRef.