ASTM C1487-00
Historical Standard: ASTM C1487-00 Standard Guide for Remedying Structural Silicone Glazing
SUPERSEDED (see Active link, below)
ASTM C1487
1. Scope
1.1 This guide provides recommendations for remedying existing structural sealant glazing (hereinafter called SSG) installations in situ. Remedial work may be necessary when a lite of glass is replaced, for routine maintenance, or after distress is discovered. This guide focuses on large-scale remedies.
1.2 Committee C24 is not aware of any comparable standards published by other organizations.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C717 Terminology of Building Seals and Sealants
C1392 Guide for Evaluating Failure of Structural Sealant Glazing
C1394 Guide for In-Situ Structural Silicone Glazing Evaluation
C1401 Guide for Structural Sealant Glazing
E330 Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
E997 Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
E1233 Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
Keywords
silicone glazing; structural sealant glazing (SSG); remedies;
ICS Code
ICS Number Code 81.040.20 (Glass in building)
DOI: 10.1520/C1487-00
ASTM International is a member of CrossRef.
