Abstract

This specification covers lime and limestone productions and by-product alkaline materials suitable for environmental uses. Requirements for quicklime, hydrated lime, and limestone for the designated end uses are specified, and are on the basis of the weight of sample taken at the place of manufacture. Quicklime shall be free of unslakable residues and shall be capable of disintegrating in water to form a suspension of finely divided material. The amount of residue shall not exceed that agreed upon between the manufacturer and the purchaser (the residue is the amount of the material retained on a specified screen). The slaking rate for the specified quicklime should be matched to the requirements of the slaking equipment. Test methods such as chemical analyses, physical tests and basic factor test shall be performed.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers lime and limestone products and by-product alkaline materials suitable for environmental uses as shown in Table 1.

1.2 The buyer shall designate the use, as listed in Table 1, and may specify one or more of the type designations listed below Table 1.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C25 Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

C50 Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

C110 Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

C400 Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid

D6249 Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

Keywords

biosolids; by-product lime; calcium oxide; dolomitic lime; dolomitic limestone; drinking water; environmental; high calcium lime; high calcium limestone; hydrated lime; industrial waste; lime; limestone; magnesian lime; magnesian limestone; neutralization; quicklime; residuals; sewage sludge; stabilization; treatment; waste; wastewater; water; water softening; Calcium oxide (CaO) content; Dolomitic limestone; Drinking water--specifications; Environmental conditioning; High calcium lime/limestone; Hydrated lime--specifications; Industrial waste treatment--specifications; Limestone--specifications; Magnesian lime (ML); Quicklime; Wastewater testing/treatment; Water softening;

ICS Code

ICS Number Code 91.100.15 (Mineral materials and products)

DOI: 10.1520/C1529-06AR11

ASTM International is a member of CrossRef.

ASTM C1529