Abstract

This specification covers the material characteristics, physical requirements, and sampling method appropriate to the selection of slate dimension stone for general building and structural purposes. Dimension slate shall include stone that is sawed, cut, split, or otherwise finished or shaped, and shall specifically exclude molded, cast, or otherwise artificially aggregated units composed of fragments, and also crushed and broken stone. It specifically excludes roofing slate and slate for industrial uses. Slates shall be selected for either exterior or interior use. The physical property requirements to which slate stones shall adhere to are absorption, abrasion resistance, acid resistance, and modulus of rupture (across grain and along grain).

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers the material characteristics, physical requirements, and sampling appropriate to the selection of slate for general building and structural purposes. Refer to Guides C1242 and C1528 for the appropriate selection and use of slate dimension stone.

1.2 Dimension slate shall include stone that is sawed, cut, split, or otherwise finished or shaped, and shall specifically exclude molded, cast, or otherwise artificially aggregated units composed of fragments, and also crushed and broken stone.

1.3 It specifically excludes roofing slate (see Specification ) and slate for industrial uses.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C119 Terminology Relating to Dimension Stone

C120/C120M Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)

C121/C121M Test Method for Water Absorption of Slate

C217/C217M Test Method for Weather Resistance of Slate

C241/C241M Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic

C406/C406M Specification for Roofing Slate

C1242 Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

C1353 Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser

C1528 Guide for Selection of Dimension Stone

Keywords

acid resistance; carbonaceous ribbons; slate; Building materials/applications--specifications; Dimension stone--specifications; Slate--specifications;

ICS Code

ICS Number Code 91.100.15 (Mineral materials and products)

DOI: 10.1520/C0629_C0629M-10

ASTM International is a member of CrossRef.

ASTM C629 / C629M