1. Scope

1.1 This practice covers the test methods for measuring those properties of graphite and boronated graphite materials that may be used for the design and evaluation of high-temperature gas-cooled reactors.

1.2 The test methods referenced herein are applicable to materials used for replaceable and permanent components as defined in Section 7 and include fuel and removable reflector elements; target elements and insulators; permanent side reflector elements; core support pedestals and elements; control rod, reserve shutdown, and burnable poison compacts, and neutron shield material.

1.3 This practice includes test methods that have been selected from existing ASTM standards, ASTM standards that have been modified, and new ASTM standards that are specific to the testing of materials listed in 1.2. Comments on individual test methods for graphite and for boronated graphite components are given in Sections 8 and 10, respectively. The test methods are summarized in Tables 1 and 2.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C559 Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

C561 Test Method for Ash in a Graphite Sample

C577 Test Method for Permeability of Refractories

C611 Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

C625 Practice for Reporting Irradiation Results on Graphite

C651 Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

C695 Test Method for Compressive Strength of Carbon and Graphite

C709 Terminology Relating to Manufactured Carbon and Graphite

C747 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

C749 Test Method for Tensile Stress-Strain of Carbon and Graphite

C769 Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining Youngs Modulus

C816 Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method

C838 Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

C1039 Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

C1179 Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

C1233 Practice for Determining Equivalent Boron Contents of Nuclear Materials

C1274 Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption

D346 Practice for Collection and Preparation of Coke Samples for Laboratory Analysis

D1193 Specification for Reagent Water

D2854 Test Method for Apparent Density of Activated Carbon

D2862 Test Method for Particle Size Distribution of Granular Activated Carbon

D3104 Test Method for Softening Point of Pitches (Mettler Softening Point Method)

D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

D5600 Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7219 Specification for Isotropic and Near-isotropic Nuclear Graphites

E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves

E132 Test Method for Poissons Ratio at Room Temperature

E228 Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer

E261 Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques

E639 Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer

E1461 Test Method for Thermal Diffusivity by the Flash Method

Keywords

boronated graphite; chemical properties; graphite; high temperature gas-cooled nuclear reactor; mechanical properties; neutronic properties; physical properties; thermal properties; Boronated graphite; Carbon; Chemical analysis--nuclear materials; Core support blocks/posts/seats; Design--nuclear materials/applications; Graphite; High-temperature gas-cooled nuclear reactor; Neutronic properties; Nuclear graphite; Property data; Research and development applications; Thermal conductance/conductivity;

ICS Code

ICS Number Code 27.120.10 (Reactor engineering)

DOI: 10.1520/C0781-02

ASTM International is a member of CrossRef.