ASTM D1623-03
Historical Standard: ASTM D1623-03 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
SUPERSEDED (see Active link, below)
ASTM D1623
1. Scope
1.1 This test method covers the determination of the tensile and tensile adhesion properties of rigid cellular materials in the form of test specimens of standard shape under defined conditions of temperature, humidity, and testing machine speed.
1.2 Tensile properties shall be measured using any of three types of specimens:
1.2.1 Type A shall be the preferred specimen in those cases where enough sample material exists to form the necessary specimen,
1.2.2 Type B shall be the preferred specimen when only smaller specimens are available, as in sandwich panels, etc.
1.2.3 Type C shall be the preferred specimen for the determination of tensile adhesive properties of a cellular plastic to a substrate as in a sandwich panel or the bonding strength of a cellular plastic to a single substrate.
Note 1The values stated in SI units are to be regarded as the standard.
Note 2There is no equivalent ISO standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D638 Test Method for Tensile Properties of Plastics
D883 Terminology Relating to Plastics
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Keywords
rigid cellular plastics; tensile adhesion; tensile strength; Adhesion; Rigid cellular plastics; Tensile properties/testing--plastics;
ICS Code
ICS Number Code 83.100 (Cellular materials)
DOI: 10.1520/D1623-03
ASTM International is a member of CrossRef.
