ASTM D2752-88(2002)
Historical Standard: ASTM D2752-88(2002) Standard Test Methods for Air Permeability of Asbestos Fibers
SUPERSEDED (see Active link, below)
1. Scope
1.1 These test methods cover the measurement of the relative degree of openness or degree of fiberization of milled asbestos fiber by air permeability instruments.
1.2 Method A is the recommended procedure and describes a determination by means of the Rapid Surface Area apparatus. This test method is limited to fibers with an effective surface area in the range from 10 to 250 dm 2 /g (490 to 12 000 ft 2 /lb).
1.3 Method B is an alternative procedure and covers the use of the Dyckerhoff apparatus. This test method is limited to fibers within the range from 10 to 600 Dyckerhoff seconds.
1.4 Only those asbestos specimens which are of similar specific gravities will bear strict comparison by these air permeability methods since differences in density result in specimens being tested under different conditions of porosity.
1.5 Samples containing excessive quantities of nonfibrous particles or contaminants will not give reliable or meaningful results.
1.6 The values stated in SI units are to be regarded as the standard. The inch-pound units in parentheses are provided for information only.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D2590 Test Method for Sampling Chrysotile Asbestos
D3879 Test Method for Sampling Amphibole Asbestos
E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves
E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods
Other Standard
NNN-P-1475B Federal Specification for Paper, Filter, AnalyticalKeywords
air permeability; asbestos; Dyckerhoff; fiber; permeability; Rapid Surface Area; specific surface;
ICS Code
ICS Number Code 59.060.30 (Mineral and metal fibres)
DOI: 10.1520/D2752-88R02
ASTM International is a member of CrossRef.
