1. Scope

1.1 This guide is intended for the evaluation of clear and pigmented coatings designed for use on rigid or semirigid plastic substrates. Coated film and sheeting are not covered by this guide.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D522 Test Methods for Mandrel Bend Test of Attached Organic Coatings

D523 Test Method for Specular Gloss

D658 Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive

D822 Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

D870 Practice for Testing Water Resistance of Coatings Using Water Immersion

D968 Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

D1308 Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes

D1729 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials

D2199 Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers

D2244 Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

D2246 Test Method for Finishes on Primed Metallic Substrates for Humidity-Thermal Cycle Cracking

D2247 Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity

D3170 Test Method for Chipping Resistance of Coatings

D3359 Test Methods for Measuring Adhesion by Tape Test

D3361 Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

D3363 Test Method for Film Hardness by Pencil Test

D4060 Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

D4141 Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings

D4587 Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

D5031 Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings

D5179 Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing

D6695 Practice for Xenon-Arc Exposures of Paint and Related Coatings

G99 Test Method for Wear Testing with a Pin-on-Disk Apparatus

Keywords

coatings for plastics; plastic substrates;

ICS Code

ICS Number Code 25.220.01 (Surface treatment and coating in general); 83.020 (Manufacturing processes in the rubber and plast industries)

DOI: 10.1520/D3002-97

ASTM International is a member of CrossRef.