ASTM D3525-93(2002)e1
Historical Standard: ASTM D3525-93(2002)e1 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
SUPERSEDED (see Active link, below)
ASTM D3525
1. Scope
1.1 This test method utilizes gas chromatography to determine the amount of dilution in used gasoline fuel engine oils.
1.2 This test method is limited to gas chromatographs equipped with flame ionization detector and programmable oven.
Note 1The use of other detectors and instrumentation has been reported. However, the precision statement applies only when the instrumentation specified is employed.
1.3 The applicability of this method to gelled used engine oils has not been adequately investigated to ensure compliance with the indicated repeatability and reproducibility. Gelled oils are defined as oils that develop structure on standing, but that return to their original fluidity with light agitation.
1.4 The values stated in SI units are to be regarded as the standard. Inch-pound units are provided for information only.
1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
E260 Practice for Packed Column Gas Chromatography
E355 Practice for Gas Chromatography Terms and Relationships
E594 Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
E1510 Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
Keywords
fuel dilution; gas chromatography; gasoline; lubricating oil; Diluents; Fuel dilution; Gas chromatography (GC)--petroleum products; Gasoline content--used lubricating oil; Gasoline diluent; Lubricating oils;
ICS Code
ICS Number Code 75.100 (Lubricants, industrial oils and related products)
DOI: 10.1520/D3525-93R02E01
ASTM International is a member of CrossRef.
