1. Scope

1.1 These test methods cover the instrumental determination of carbon, hydrogen, and nitrogen in laboratory samples of coal and coke prepared in accordance with Test Methods D 2013 and D 346.

1.2 Within the limitations outlined below, these test methods are applicable to either the air-dry or moisture-free laboratory sample, or both.

1.2.1 For instrumental systems in which the moisture and waters of hydration in the sample are liberated with (and only with) the oxidation products upon combustion, the analyses can be performed on a test specimen of the air-dry sample (Note 1). Concentrations determined on this air-dried basis represent the total carbon (including that present as carbonate), total hydrogen (including that present as water), and total nitrogen.

Note 1These systems are also satisfactory for determining the subject materials in the moisture-free sample.

1.2.2 For systems in which the moisture and hydrates are otherwise liberated, the analysis shall be performed on the moisture-free sample. Values obtained on this basis represent the total carbon, organic hydrogen, and total nitrogen.

1.3 These test methods can be used to provide for the requirements specified in Practice D 3176 for the ultimate analysis.

1.4 The values stated in SI units shall be regarded as the standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 8.3.1.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D2013 Practice for Preparing Coal Samples for Analysis

D3173 Test Method for Moisture in the Analysis Sample of Coal and Coke

D3176 Practice for Ultimate Analysis of Coal and Coke

D3180 Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases

D5142 Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures

D5865 Test Method for Gross Calorific Value of Coal and Coke

ISO Standard

Keywords

Carbon content--coal/coke; Coal/coke products--chemical analysis; Hydrogen content--coal/coke; Instrumental measurement--coal/coke; Nitrogen content--coal/coke;

ICS Code

ICS Number Code 75.160.10 (Solid fuels)

DOI: 10.1520/D5373-02R07

ASTM International is a member of CrossRef.