Translated Standard: Russian
more info

Significance and Use

Carbon and hydrogen values can be used to determine the amount of oxygen (air) required in combustion processes and for calculation of the efficiency of combustion processes.

Carbon and hydrogen determinations can be used in calculations including material balance, reactivity and yields of products relevant to coal conversion processes such as gasification and liquefaction.

Carbon and nitrogen values can be used in material balance calculations employed for emission accounting purposes.

Note 2The bulk composition of coal changes at a rate that varies from coal to coal during storage. As a result using coal for calibration can yield incorrect estimates of carbon, and hydrogen content in particular.

1. Scope

1.1 This test method covers the instrumental the determination of carbon in the range of 54.9 % m/m to 84.7 % m/m, hydrogen in the range of 3.25 % m/m to 5.10 % m/m, and nitrogen in the range of 0.57 % m/m to 1.80 % m/m in the analysis sample (7.1) of coal.

Note 1The coals included in the interlaboratory study employed to derive the precision statement for this standard cover ASTM rank lignite A to low volatile bituminous. Additional information concerning the composition of these coals appears in Annex A5.

1.2 The values stated in SI units shall be regarded as the standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D2013 Practice for Preparing Coal Samples for Analysis

D3173 Test Method for Moisture in the Analysis Sample of Coal and Coke

D3176 Practice for Ultimate Analysis of Coal and Coke

D3180 Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases

D5142 Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures

D5865 Test Method for Gross Calorific Value of Coal and Coke

ISO Standard

Keywords

Carbon content--coal/coke; Coal/coke products--chemical analysis; Hydrogen content--coal/coke; Instrumental measurement--coal/coke; Nitrogen content--coal/coke;

ICS Code

ICS Number Code 75.160.10 (Solid fuels)

DOI: 10.1520/D5373-08

ASTM International is a member of CrossRef.

ASTM D5373