Abstract

This guide covers the standard for the calculation and the substantiation of recycled content of packaging papers and paperboard products. The mass balance approach shall be used to determine absolute recycled content. This guide also covers the recycled content that contain any amount or kind of recycled fiber. Methods to calculate and substantiate levels of such recycled fiber is also covered. Classes and types of paper and paperboard product include, but are not limited to, folding boxboard, set-up boxboard; linearboard and corrugating medium for use in corrugated containers; tubestock; carrier board, bag paper and other related packaging paper and paperboard products.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This guide provides an approach for both the calculation and the substantiation of recycled content of finished packaging paper and paperboard products. A mass balance approach is recommended for use by manufacturers since no physical or chemical test method is currently available to determine absolute recycled content of a finished paper product.

1.2 This guide covers ( 1 ) recycled content of packaging paper and paperboard products that contain any amount or kind of recycled fiber; and ( 2 ) methods to calculate and substantiate the level(s) of recycled fiber content claimed by an agreement between the buyer and the seller.

1.2.1 This guide may be used with or without modification to calculate or substantiate the recycled content of packaging paper and paperboard products when recovered nonfibrous materials (for example, filler) are a part of the recycled fiber furnish. Limited guidance is provided for appropriate modifications to this guide for the determination of amount of recycled nonfibrous materials in paper products.

1.3 This guide does not recommend either an amount or a kind of recycled fiber or material to use since ( 1 ) the amount and kind of recycled content in a packaging paper or paperboard product should be agreed upon between the buyer and the seller, and ( 2 ) the calculation and substantiation procedures recommended may be used for any amount or kind of recycled material agreed upon between the buyer and the seller.

1.4 The mass balance calculation method recommended by this guide may or may not comply with applicable federal, state, or local laws for recycled content statements intended to be received by consumers. Limited guidance on content statements is in Appendix X1.

1.5 The following safety hazards caveat pertains only to the test method portion, Section 10, of this guide: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D1968 Terminology Relating to Paper and Paper Products

Keywords

beverage carriers; boxboard cuttings; corrugating medium; double-lined Kraft cuttings (DLK); filler; folding boxboard; grocery bags; high-grades; linerboard; mass balance; multi-wall bags; old corrugated (OCC); old magazines (OMG); old newsprint (ONP); packaging paper; paperboard; post-consumer recovered material; pre-consumer recovered material; recovered paper material; recycled content; sacks; solid bleached Kraft paperboard; tubestock; unbleached Kraft paperboard ; Tubestock; Unbleached Kraft paperboard; Beverage carriers; Corrugating medium; Fillers analysis; Folding boxboard; Grocery bags; Linerboard; Mass balance; Multi-wall bags; Packing/packaging materials/systems (paper); Paper; Paperboard; Recovered paper material; Recycled fiber content; Sacks; Solid bleached Kraft paperboard;

ICS Code

ICS Number Code 85.060 (Paper and board)

DOI: 10.1520/D5663-97R11

ASTM International is a member of CrossRef.

ASTM D5663