ASTM D5709-95(2000)e1
Historical Standard: ASTM D5709-95(2000)e1 Standard Test Method for Sieve Analysis of Petroleum Coke
SUPERSEDED (see Active link, below)
ASTM D5709
1. Scope
1.1 This test method details a procedure for performing particle size distribution analysis by dry sieve testing on green petroleum coke with a topsize of no more than 75 mm and calcined petroleum coke with a topsize of no more than 25 mm. Size fractions go down to and include 4.75 mm for green petroleum coke and 75 [mu]m for calcined petroleum coke.
Note 1-To convert units see Table 1 from Specification E11. For example, 75 mm is approximately equivalent to a nominal sieve opening of 3 in. and 25 mm to a nominal sieve opening of 1 in. Likewise, 4.75 mm can be converted to approximately 0.187 in. and 75 microns to 0.0029 in.1.2 Although the values stated in SI units are to be regarded as the standard, the sieve size is reported as U.S.A. standard test series in any units listed in Table 1 of Specification E11, or their commercial size equivalents.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D346 Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
D2013 Practice for Preparing Coal Samples for Analysis
D2234/D2234M Practice for Collection of a Gross Sample of Coal
D4057 Practice for Manual Sampling of Petroleum and Petroleum Products
D4749 Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves
Keywords
calcined petroleum coke; green petroleum coke; particle size analysis; screening; sieve; Calcined petroleum coke; Green petroleum coke; Particle analysis--petroleum products; Petroleum coke; Sieve analysis--petroleum products;
ICS Code
ICS Number Code 75.160.10 (Solid fuels)
DOI: 10.1520/D5709-95R00E01
ASTM International is a member of CrossRef.
