Significance and Use

This practice is intended to provide a list of standard procedures for test programs investigating the chemical resistance of a geogrid to a liquid. This practice should be used in the absence of other specifications required for the particular situation being addressed.

This practice is intended to provide a basis of standardization for those wishing to compare or investigate the chemical resistance of a geogrid. It should be recognized that chemical resistance is a user judgment evaluation and that this practice does not offer procedures for interpreting the results obtained from test procedures contained in this practice. As a practice, this does not produce a test result.

This practice is for the chemical resistance assessment of geogrids and is written in parallel to similar practices for geomembranes, geotextiles, geonets, and geopipes. Each practice is to be considered individually for the geosynthetic under investigation and collectively for all geosynthetics exposed to the potentially harsh chemical environment under consideration.

1. Scope

1.1 This practice covers the procedures for testing of geogrids for chemical resistance to liquids.

1.2 This practice describes methods for measuring changes in physical and mechanical properties caused by immersion in test solutions that may be representative of anticipated end-use conditions.

1.3 This practice describes procedures for required and recommended testing of geogrids.

1.4 Evaluation or interpretation of test data is beyond the scope of this practice.

1.5 This practice is intended to be used in conjunction with D 5322 , or D 5496 , or both. The scope of this practice is limited to testing and reporting procedures for unexposed and exposed geogrid coupons.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D16 Terminology for Paint, Related Coatings, Materials, and Applications

D76 Specification for Tensile Testing Machines for Textiles

D123 Terminology Relating to Textiles

D883 Terminology Relating to Plastics

D1238 Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

D1695 Terminology of Cellulose and Cellulose Derivatives

D4439 Terminology for Geosynthetics

D4595 Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method

D4603 Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

D5322 Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids

D5496 Practice for In Field Immersion Testing of Geosynthetics

D5747 Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

E375 Definitions of Terms Relating to Resinography

Keywords

chemical resistance; geogrids; geosynthetics; liquid waste; Chemical resistance--geosynthetics; Georigids; Geosynthetics; Liquids--geosynthetic/geothermal applications; Liquid waste;

ICS Code

ICS Number Code 83.140.99 (Other rubber and plastic products); 91.100.99 (Other construction materials)

DOI: 10.1520/D6213-97R09

ASTM International is a member of CrossRef.

ASTM D6213