ASTM D6237-98
Historical Standard: ASTM D6237-98 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
SUPERSEDED (see Active link, below)
ASTM D6237
1. Scope
1.1 This guide is intended as an information aid to painting inspectors in carrying out the task efficiently. It includes the key elements of surface preparation, coatings application, and final approval for both field and shop work. The items should be selected that are pertinent to a particular job.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C811 Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
D1212 Test Methods for Measurement of Wet Film Thickness of Organic Coatings
D1475 Test Method For Density of Liquid Coatings, Inks, and Related Products
D3359 Test Methods for Measuring Adhesion by Tape Test
D4138 Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
D4212 Test Method for Viscosity by Dip-Type Viscosity Cups
D4258 Practice for Surface Cleaning Concrete for Coating
D4259 Practice for Abrading Concrete
D4260 Practice for Liquid and Gelled Acid Etching of Concrete
D4262 Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
D4263 Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
D4285 Test Method for Indicating Oil or Water in Compressed Air
D4414 Practice for Measurement of Wet Film Thickness by Notch Gages
D4787 Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
D5064 Practice for Conducting a Patch Test to Assess Coating Compatibility
D6132 Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage
D6677 Test Method for Evaluating Adhesion by Knife
D7234 Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
E1907 Guide to Methods of Evaluating Moisture Conditions of Concrete Floors to Receive Resilient Floor Coverings
F1869 Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
F2170 Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
International Concrete Repair Institute
GuidelineNo.03732 Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, and Polymer Overlays Available from International Concrete Repair Institute, 3166 S. River Rd., Suite 132, Des Plaines, IL 60018, http://www.icri.org.Keywords
abrasive blasting; acid treatment (concrete); adhesion; chemical cleaning; coatings; concrete; detergents; inspection; laitance; masonry; moisture; Inspection--coating applications; Moisture analysis--paints/related coatings/materials; Substrates--coating applications; Acid treatment (concrete); Chemical cleaning; Concrete; Inspection personnel/inspectors; Laitance; Abrasive blasting; Masonry substrates; Paint inspectors;
ICS Code
ICS Number Code 87.020 (Paint coating processes); 91.060.10 (Walls. Partitions. Facades)
DOI: 10.1520/D6237-98
ASTM International is a member of CrossRef.
