1. Scope

1.1 This practice provides test and measurement details for measuring the performance of X-ray and Gamma ray radioscopic systems. Radioscopic examination applications are diverse. Therefore, system configurations are also diverse and constantly changing as the technology advances.

1.2 This practice is intended as a means of initially qualifying and requalifying a radioscopic system for a specified application by determining its performance level when operated in a static mode. System architecture including the means of radioscopic examination record archiving and the method for making the accept/reject decision are also unique system features and their effect upon system performance must be evaluated.

1.3 The general principles, as stated in this practice, apply broadly to transmitted-beam penetrating radiation radioscopy systems. Other radioscopic systems, such as those employing neutrons and Compton back-scattered X-ray imaging techniques, are not covered as they may involve equipment and application details unique to such systems.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For information on safety requirements, refer to the applicable documents listed in Section 2.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

E747 Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

E1025 Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology

E1255 Practice for Radioscopy

E1316 Terminology for Nondestructive Examinations

E1647 Practice for Determining Contrast Sensitivity in Radiology

E2002 Practice for Determining Total Image Unsharpness in Radiology

Keywords

contrast sensitivity; duplex wire gage; edge sharpening; focal detector distance (FDD); focal object distance (FOD); focal spot size; image processor; image quality indicator; imager; line-pair gage; magnification; near real-time radioscopy; noise reduction; penetrating radiation; radioscopic; radioscopic examination geometry; raster scan; real-time radioscopy; spatial resolution; static mode; step wedge; transmitted beam; Performance--laboratory instrumentation/process; Radioscopic examination; Transmitted beam; Raster scan; Spatial resolution; Static tests--metals/alloys; Step wedge; Compton back-scattered; Contrast manipulation/sensitivity; Duplex wire gage; Edge sharpening; Focal detector distance (FDD)/object distance (FOD); Gamma/X-radiography; Image analysis--radiographic testing; Inspection geometry; Line pair gage; Near real-time radioscopy; Noise reduction; Penetrating radiation;

ICS Code

ICS Number Code 19.100 (Non-destructive testing)

DOI: 10.1520/E1411-01

ASTM International is a member of CrossRef.