Abstract

This specification covers the requirements for magnesium oxide (MgO) and aluminum oxide (Al2O3) powders and crushable insulators used to manufacture metal-sheathed platinum resistance thermometers (PRTs), noble metal thermocouples, base metal thermocouples, and their respective cables. The following test shall be performed to meet the requirements specified: breaking force test; wet chemical analysis; fusion calorimetric analysis; quantitative analysis; and density determination.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers the requirements for magnesium oxide (MgO) and aluminum oxide (Al ₂ O ₃ ) powders and crushable insulators used to manufacture metal-sheathed platinum resistance thermometers (PRTs), noble metal thermocouples, base metal thermocouples, and their respective cables.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

B329 Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter

C809 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets

C832 Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load

D2766 Test Method for Specific Heat of Liquids and Solids

E228 Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer

E235 Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability Applications

E344 Terminology Relating to Thermometry and Hydrometry

E585/E585M Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable

E1137/E1137M Specification for Industrial Platinum Resistance Thermometers

E1225 Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique

E2181/E2181M Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable

Keywords

aluminum oxide; crushable; insulator; magnesium oxide; mineral-insulated, metal-sheathed cable; platinum resistance thermometer; thermocouple, base metal; thermocouple, noble metal; Aluminium oxide (AlO); Crushable insulators; Insulated thermocouple wire--specifications; Laboratory apparatus--specifications; Magnesium oxide (MgO); Metal-sheathed thermometers (specifications); Mineral insulated cable; Noble metal thermocouples; Platinum resistance thermometers (PRT); Thermocouples;

ICS Code

ICS Number Code 17.200.20 (Temperature-measuring instruments); 29.035.30 (Glass and ceramic insulating materials)

DOI: 10.1520/E1652-10

ASTM International is a member of CrossRef.

ASTM E1652