1. Scope

1.1 This practice covers the collection of settled dust on surfaces using the wipe sampling method. These samples are collected in a manner that will permit subsequent extraction and determination of lead using laboratory analysis techniques such as atomic spectrometry or electroanalysis.

1.2 This practice does not address the sampling design criteria (that is, sampling plan which includes the number and location of samples) that are used for clearance, lead hazard evaluation, risk assessment, and other purposes. To provide for valid conclusions, sufficient numbers of samples should be obtained as directed by a sampling plan.

1.3 This practice contains notes that are explanatory and are not part of the mandatory requirements of this practice.

1.4 The values stated in SI units are to be regarded as the standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D4840 Guide for Sample Chain-of-Custody Procedures

E1605 Terminology Relating to Lead in Buildings

E1613 Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

E1644 Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

E1792 Specification for Wipe Sampling Materials for Lead in Surface Dust

E1979 Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead

E2051 Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis

Federal Regulations

Keywords

lead; sample collection; settled dust; wipe; Wipe sampling methods; Atomic absorption spectrometry (AAS); Dust wipe samples; FAAS (flame atomic absorption spectrometry); Field testing--soil; Graphite furnace atomic absorption spectrometry (GFAAS); ICP-AES (inductively-coupled plasma atomic emission spectrometry); Lead screening testing; Sample collection; Settled dust; Soil; Soil sampling ;

ICS Code

ICS Number Code 13.080.05 (Examination of soil in general)

DOI: 10.1520/E1728-02

ASTM International is a member of CrossRef.