ASTM E1888/E1888M-02
Historical Standard: ASTM E1888/E1888M-02 Standard Test Method for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
SUPERSEDED (see Active link, below)
ASTM E1888 / E1888M
1. Scope
1.1 This test method covers guidelines for acoustic emission (AE) examinations of pressurized containers made of fiberglass reinforced plastic (FRP) with balsa cores. Containers of this type are commonly used on tank trailers for the transport of hazardous chemicals.
1.2 This test method is limited to cylindrical shape containers, 0.5 m [20 in.] to 3 m [120 in.] in diameter, of sandwich construction with balsa wood core and over 30 % glass (by weight) FRP skins. Reinforcing material may be mat, roving, cloth, unidirectional layers, or a combination thereof. There is no restriction with regard to fabrication technique or method of design.
1.3 This test method is limited to containers that are designed for less than 0.520 MPa [75.4 psi] (gage) above static pressure head due to contents.
1.4 This test method does not specify a time interval between examinations for re-qualification of a pressure container.
1.5 Containers that operate with a vacuum are not within the scope of this test method.
1.6 Repair procedures are not within the scope of this test method.
1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
AIA Standard
NAS-410 Nondestructive Testing Personnel Qualification and Certification Available from Aerospace Industries Association of America, Inc. (AIA), 1000 Wilson Blvd., Suite 1700, Arlington, VA 22209-3928, http://www.aia-aerospace.org.ANSI/ASNT Standards
ANSI/ASNT CP-189 Standard for Qualification and Certification of NDT PersonnelASME Standard
Section V, Article 1 Boiler and Pressure Vessel Code Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Three Park Ave., New York, NY 10016-5990, http://www.asme.org.ASTM Standards
E543 Specification for Agencies Performing Nondestructive Testing
E750 Practice for Characterizing Acoustic Emission Instrumentation
E976 Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
E1067 Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
E1316 Terminology for Nondestructive Examinations
E2374 Guide for Acoustic Emission System Performance Verification
Keywords
acoustic emission; balsa core; composite pressure vessel; tank trailer;
ICS Code
ICS Number Code 17.140.20 (Noise emitted by machines and equipment); 23.020.10 (Stationary containers and tanks)
DOI: 10.1520/E1888_E1888M-02
ASTM International is a member of CrossRef.
