1. Scope

1.1 These test methods cover the following procedures for determining the structural properties of segments of floor and roof constructions:

1.2 Metric units (SI) are to be considered as the primary standard units.

1.3 These test methods serve to evaluate the performance of floors and roofs panels subjected to ( 1 ) Uniform loading, and ( 2 ) Concentrated static loading, which represent conditions sustained in the actual performance of the element. The standard is not intended for the evaluation of individual structural framing and/or supporting members (floor joist, rafters and trusses).

1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of the standard.

1.5 This standard is not intended to cover concrete floor slabs.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C109/C109M Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

E4 Practices for Force Verification of Testing Machines

E72 Test Methods of Conducting Strength Tests of Panels for Building Construction

E73 Practice for Static Load Testing of Truss Assemblies

E196 Practice for Gravity Load Testing of Floors and Low Slope Roofs

E455 Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

E575 Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

E631 Terminology of Building Constructions

E661 Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

E695 Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

E1592 Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

Keywords

concentrated loads; deformation; floors; load duration; roofs; sheathing; strength tests; transverse loads; Concentrated loading tests; Deformation; Flooring/floor covering systems; Loading tests--flooring; Loading tests--roofing materials; Roofing materials/applications; Sheaths/sheathing; Strength--roofing materials/applications; Transverse load-bearing materials/applications;

ICS Code

ICS Number Code 91.060.30 (Ceilings. Floors. Stairs)

DOI: 10.1520/E2322-03

ASTM International is a member of CrossRef.