1. Scope

1.1 This guide concerns building design, construction, commissioning, operation and maintenance.

This guide addresses the need for systematic evaluation of factors that can result in moisture-induced damage to a building or its components. Although of great potential importance, serviceability issues which are often, but not necessarily, related to physical damage of the building or its components (for example indoor air quality of electrical safety) are not directly addressed in this guide.

1.3 The emphasis of this guide is on low-rise buildings. Portions of this guide, in particular sections 5, 6, and 7, may also be applicable to high-rise buildings.

1.4 This standard is not intended for direct use in codes and specifications. It does not attempt to prescribe acceptable limits of damage. Buildings intended for different uses may have different service life expectancies, and expected service lives of different components within a given building often differ. Furthermore, some building owners may be satisfied with substantially shorter service life expectancies of building components or of the entire building than other building owners. Lastly, the level of damage that renders a component unservicable may vary with the type of component, the degree to which failure of the component is critical (for example whether failure constitutes a life-safety hazard), and the judgement (i.e. tolerance for damage) of the building owner. For the reasons stated in this paragraph, prescribing limits of damage would require listing many pages of exceptions and qualifiers and is beyond the scope of this standard.

1.5 This standard does not purport to address the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C168 Terminology Relating to Thermal Insulation

C717 Terminology of Building Seals and Sealants

C755 Practice for Selection of Water Vapor Retarders for Thermal Insulation

C1193 Guide for Use of Joint Sealants

D1079 Terminology Relating to Roofing and Waterproofing

E331 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

E547 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

E631 Terminology of Building Constructions

E632 Practice for Developing Accelerated Tests to Aid Prediction of the Service Life of Building Components and Materials

E1105 Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

E1643 Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

E1677 Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls

E1745 Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

E2112 Practice for Installation of Exterior Windows, Doors and Skylights

E2136 Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings--Durability

Keywords

buildings; moisture induced; water induced damage; Building materials/applications; Damage assessment; Deterioration; Durability; Water-induced damage; Water penetration;

ICS Code

ICS Number Code 91.120.30 (Waterproofing)

DOI: 10.1520/E0241-00E01

ASTM International is a member of CrossRef.