1. Scope

1.1 This practice is intended as a guide to shipbuilders, shipowners, and design agents for use in the preparation of piping system material schedules for commercial ship design and construction.

1.2 The materials and limitations listed in meet the minimum requirements of the U.S. Coast Guard and the American Bureau of Shipping and should be considered to be the minimum acceptable materials in regard to material, design, and testing. This document is not intended to limit the selection of material strictly to those listed. Other equal or superior materials may be used provided that they are acceptable to the regulatory bodies and classification societies.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

A53/A53M Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

A105/A105M Specification for Carbon Steel Forgings for Piping Applications

A106/A106M Specification for Seamless Carbon Steel Pipe for High-Temperature Service

A134 Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

A139/A139M Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

A178/A178M Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

A179/A179M Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

A181/A181M Specification for Carbon Steel Forgings, for General-Purpose Piping

A182/A182M Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

A192/A192M Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

A193/A193M Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

A194/A194M Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

A213/A213M Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

A214/A214M Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

A216/A216M Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

A234/A234M Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

A242/A242M Specification for High-Strength Low-Alloy Structural Steel

A249/A249M Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

A283/A283M Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

A307 Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

A320/A320M Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

A335/A335M Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

A351/A351M Specification for Castings, Austenitic, for Pressure-Containing Parts

A387/A387M Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

A395/A395M Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

A515/A515M Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

A536 Specification for Ductile Iron Castings

A563 Specification for Carbon and Alloy Steel Nuts

B61 Specification for Steam or Valve Bronze Castings

B62 Specification for Composition Bronze or Ounce Metal Castings

B88 Specification for Seamless Copper Water Tube

B265 Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

B338 Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

B348 Specification for Titanium and Titanium Alloy Bars and Billets

B363 Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

B367 Specification for Titanium and Titanium Alloy Castings

B381 Specification for Titanium and Titanium Alloy Forgings

B466/B466M Specification for Seamless Copper-Nickel Pipe and Tube

B467 Specification for Welded Copper-Nickel Pipe

B861 Specification for Titanium and Titanium Alloy Seamless Pipe

B862 Specification for Titanium and Titanium Alloy Welded Pipe

B863 Specification for Titanium and Titanium Alloy Wire

B898 Specification for Reactive and Refractory Metal Clad Plate

D2996 Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D2997 Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D4024 Specification for Machine Made Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

F467 Specification for Nonferrous Nuts for General Use

F468 Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

F682 Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

F683 Practice for Selection and Application of Thermal Insulation for Piping and Machinery

F704 Practice for Selecting Bolting Lengths for Piping System Flanged Joints

F722 Specification for Welded Joints for Shipboard Piping Systems

F1476 Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

F1548 Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

Keywords

materials; piping systems; piping systems materials; ship construction; ship design; Design--ship construction; Shipbuilding materials (general); Shipbuilding piping materials; Shipbuilding steel pipe materials;

ICS Code

ICS Number Code 23.040.01 (Pipeline components in general. Pipelines); 47.020.30 (Piping systems)

DOI: 10.1520/F1155-98R04

ASTM International is a member of CrossRef.