Abstract

This specification covers the requirements for sacrificial anodes of zinc alloy in the form of slabs, plates, discs, and rods for corrosion protection (cathodic protection) of metals and alloys. These anodes are primarily intended to reduce corrosion of surface ship and submarine hulls, steel and aluminum equipment and structures, sea chests, sonar domes, and the seawater side of condensers and other heat exchangers. The anodes are available either as cast-in cores (Class 1) or plain with no cores (Class 2). Class 1 anodes shall be of the following types: Type ZHS hull slabs with steel straps; Type ZHB hull slabs with brass straps; Type ZHC hull slabs with core straps; Type ZSS submarine slabs with steel straps; Type ZTS teardrop shapes with steel straps; Type ZEP heat exchanger or fair water discs (pipe core or pipe bushing core) that are in the form of square slabs (Style A), circular slabs (Style B), and semicircular slabs (Style C); Type ZBP bars with pipe cores; and Type ZDM segmented discs with machine formed interlocking cores. Conversely, Class 2 anodes shall be of the following types: Type ZRN extruded, drawn or rolled rods; and Type ZPN rolled plates. Anodes shall conform to material and manufacture, chemical composition, mechanical property, and dimensional requirements specified uniquely for each type.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers the requirements for zinc anodes in the form of slabs, plates, discs, and rods for corrosion protection (cathodic protection) of metals and alloys.

1.2 The anodes are primarily intended to reduce corrosion of surface ship and submarine hulls, steel and aluminum equipment and structures, sea chests, sonar domes, and the seawater side of condensers and other heat exchangers.

1.3 The values stated in inch-pound units are to be regarded as standard. The metric (SI) units, given in parentheses, are for information purposes only and may be approximate.

1.4 This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

Military Standards

Federal Specifications

American National Standards Institute Standards

ASTM Standards

A36/A36M Specification for Carbon Structural Steel

B21/B21M Specification for Naval Brass Rod, Bar, and Shapes

B103/B103M Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

D3951 Practice for Commercial Packaging

E290 Test Methods for Bend Testing of Material for Ductility

E536 Test Methods for Chemical Analysis of Zinc and Zinc Alloys

Keywords

anodes; disc anodes; plate anodes; rod anodes; sacrificial anodes; slab anodes; zinc alloy anodes;

ICS Code

ICS Number Code 77.150.60 (Lead, zinc and tin products)

DOI: 10.1520/F1182-07

ASTM International is a member of CrossRef.

ASTM F1182