Significance and Use

Comparison of brake horsepower developed and of specific fuel consumption rates from engine to engine may be made by use of data based upon a standard for composition of an engine assembly.

The purchaser of the engine assembly will be fully advised of the minimum scope of assembly which the purchaser may rightfully expect to be encompassed by a response to a request for quotation and to be delivered in response to a purchase order unless the engine builder in the proposal or in the offer to sell has clearly advised otherwise.

It will be made apparent to the purchaser that additional auxiliary and accessory equipment will be needed to supplement the defined engine assembly when full consideration is given to the application of the engine assembly as a prime mover in a specific vessel.

1. Scope

1.1 This guide covers performance and minimum scope of assembly of all medium speed marine diesel engines intended for main propulsion of single or multiple screw propelled marine vessels or for vessels using other than screw propeller-type main propulsion.

1.2 This guide is intended to supplement the regulations of legally constituted regulating authorities. In the event of any conflict, which may become apparent after publication of this guide, with such legally constituted regulations, the latter shall take precedence, as may be applicable within the jurisdiction of such authorities and specific to each case, unless such latter regulations are formally waived by proper cognizant authority.

1.3 This guide is not intended to relieve the purchaser of the obligation fully to advise the engine builder of all of the purchaser's unique operational considerations to allow those considerations to be satisfied.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ABS Standard

IEEE Standard

ISO Standard

Code of Federal Regulations

Keywords

brake horsepower of an engine; diesel; diesel engine; direct-reversible engine; engine assembly; engines; fuel map; fuel; internal combustion engine; main propulsion engine; map; marine engine; mass-elastic system; mechanical efficiency of an engine; medium speed diesel engine; parasitic loads; propulsion; surge line; torsional vibration; turbocharger; vibration analysis; Assemblies; Brake horsepower (of engines); Diesel engines; Direct-reversible engine; Engines; Fuel oils (marine applications); Main propulsion engine; Marine systems/subsystems/equipment; Maximum continuous rating (MCR); Mechanical efficiency (of engines); Medium speed diesel engine; Minimum scope of assembly; Performance--marine (shipboard) materials/applications; Propulsion; Surge line turbocharger; Turbocharger;

ICS Code

ICS Number Code 47.020.20 (Marine engines and propulsion systems)

DOI: 10.1520/F1338-91R07

ASTM International is a member of CrossRef.

ASTM F1338