Abstract

This guide covers the key factors to consider in estimating the effectiveness of containment and recovery systems that may be used to assist in the control of oil spills on water. The purpose of this guide is to provide the user with information on assessing the effective use of spill-cleanup equipment. It is intended for use by those involved in planning for and responding to oil spills. In evaluating the effectiveness of containment and recovery systems used in response to oil spills, many factors need to be considered of which skimmer performance is but one. The objective of this guide is to describe a range of factors that must be considered in estimating recovery system effectiveness. Response strategies will depend to some extent on the type of spill. The spill scenario should be defined as to whether it is an instantaneous or continuous release, whether or not the spill has ceased flowing, and whether the spill is contained or uncontained. The following oil slick properties must be specified for the spill scenario: spill volume; area; slick thickness; slick viscosity; and emulsification.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This guide covers the key factors to consider in estimating the effectiveness of containment and recovery systems that may be used to assist in the control of oil spills on water.

1.2 The purpose of this guide is to provide the user with information on assessing the effective use of spill-cleanup equipment. It is intended for use by those involved in planning for and responding to oil spills.

1.3 Sections of this guide describe calculation procedures for estimating recovery system effectiveness. It should be understood that any such calculations cannot be expected to predict system performance, but are intended to provide a common basis for comparing system performance.

1.4 One of the main reasons that the calculation procedures cannot be used to predict system performance is that the analysis is sensitive to assumptions made on the properties of the oil slick, and particularly the changes in slick thickness and emulsification. It is emphasized that the purpose of this guide is not to provide a standard method for estimating slick property changes, but rather to provide a standard guide for using that information in comparing system performance.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

F625 Practice for Classifying Water Bodies for Spill Control Systems

F631 Guide for Collecting Skimmer Performance Data in Controlled Environments

F808 Guide for Collecting Skimmer Performance Data in Uncontrolled Environments

F1523 Guide for Selection of Booms in Accordance With Water Body Classifications

Keywords

Effectiveness testing; Oil spill control systems; Recovery; Storage stability--petroleum products; Total slick area;

ICS Code

ICS Number Code 13.030.40 (Installations and equipment for waste disposal and treatment)

DOI: 10.1520/F1780-97R10

ASTM International is a member of CrossRef.

ASTM F1780