ASTM F1797-98(2003)
Historical Standard: ASTM F1797-98(2003) Standard Test Method for Acoustic Emission Testing of Insulated Digger Derricks
SUPERSEDED (see Active link, below)
ASTM F1797
1. Scope
1.1 This test method covers a procedure for acoustic emission (AE) testing of insulated digger derricks.
1.1.1 Equipment Covered This test method applies to special multipurpose vehicle-mounted machines, commonly known as digger derricks. These machines are primarily designed to dig holes, set poles, and position materials and apparatus.
1.1.1.1 Insulated type digger derricks may be evaluated with this test method.
Digger derricks, if so equipped to position personnel or equipment, or both, may also be evaluated with this test method in conjunction with Test Method F 914.
1.1.2 Equipment Not Covered Excluded from this test method are general-purpose cranes designed only for lifting service and machines primarily designed only for digging holes.
1.2 The AE test method is used to detect and area-locate emission sources. Verification of emission sources may require the use of other nondestructive test (NDT) methods, such as radiography, ultrasonic, magnetic particle, liquid penetrant, and visual inspection.
1.3 Precaution This test method requires that external loads be applied to the superstructure of the vehicle under test. During the test, caution must be taken to safeguard personnel and equipment against unexpected failure or instability of the vehicle or components.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
Other Standards
EMI Nomenclature and for Truck-Mounted Extensible Aerial Devices, Articulating Aerial Devices, Digger-Derricks Available from the Equipment Manufacturers Institute, 410 N. Michigan Ave., Chicago, IL 60611.ASTM Standards
E569 Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
E610
E650 Guide for Mounting Piezoelectric Acoustic Emission Sensors
E750 Practice for Characterizing Acoustic Emission Instrumentation
E976 Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
F914 Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments
Keywords
Acoustic emission (AE) testing; Derricks; Insulated digger derricks; Pass-fail test;
ICS Code
ICS Number Code 17.140.20 (Noise emitted by machines and equipment); 47.020.40 (Lifting and cargo handling systems)
DOI: 10.1520/F1797-98R03
ASTM International is a member of CrossRef.