1. Scope

1.1 This specification establishes minimum characteristics for those factors that determine particle size, consistency, purity, and ability to drain.

1.2 Engineered wood fiber that meets the requirements of this specification must comply with Specification F 1292, if the surface is in the use zone as defined in Specification F 1487.

1.3 A sample of wood fiber that meets the requirements of this specification may be designated engineered wood fiber and be suitable for playground safety surfacing.

1.4 This specification does not imply that an injury cannot be incurred if the engineered wood fiber complies with this specification.

1.5 The following precautionary statement pertains to the test method portions only, in 7.4, 8.4, and 9.4 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.6 To meet the requirements of this specification, the material shall perform as follows:

1.6.1 The material shall meet particle size requirements.

1.6.2 The material shall meet the requirement for metal particles.

1.6.3 The material shall meet the allowable heavy metal concentrations considered hazardous to children.

1.6.4 The material shall meet the requirements of Specification F 1292.

1.7 The values stated in inch-pound units are to be regarded as standard. The values in parentheses are mathematical conversions. SI units, which are provided for information, are not considered the standard except in 8.5.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C136 Test Method for Sieve Analysis of Fine and Coarse Aggregates

D1193 Specification for Reagent Water

D2217 Practice for Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants

E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves

F963 Consumer Safety Specification for Toy Safety

F1292 Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment

F1487 Consumer Safety Performance Specification for Playground Equipment for Public Use

Keywords

hazardous metal; magnetic probe; sieve test; tramp metal; Engineered wood fiber; Playing surfaces (athletic)--specifications; Safety precautions--sports equipment; Playground equipment--specifications; Sports equipment--specifications ;

ICS Code

ICS Number Code 79.080 (Semi-manufactures of timber); 97.200.40 (Playgrounds)

DOI: 10.1520/F2075-01

ASTM International is a member of CrossRef.