ASTM F887-97
Historical Standard: ASTM F887-97 Standard Specifications for Personal Climbing Equipment
SUPERSEDED (see Active link, below)
ASTM F887
1. Scope
1.1 These specifications cover acceptance testing of climbers and climber straps, body belts and positioning straps, and harnesses used by workers in the climbing of poles, trees, towers, and other structures.
1.2 Three types of climbers, Types A, B, and C, and two types of climber straps, Types A and B, are covered.
1.3 Two types of body belts, Types A and B, are covered.
1.4 Three types of positioning straps, Types A, B, and C, in two styles, I and II are covered.
1.5 Two types of harnesses, Types A and B, are covered.
1.6 The values stated in inch-pound units are to be regarded as the standard.
1.7 The following safety hazards caveat pertains only to the test method portions, 9.2, 13.3, 14.3, 17.3 and Sections 18, 19, and 20 of these specifications: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ANSI/ASSE Standard
Z359.0-2012 Definitions and Nomenclature Used for Fall Protection and Fall Arrest Z359.13-2009 Personal Energy Absorbers and Energy Absorbing Lanyards Z359.1 Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components Z359.3-2007 Safety Requirements for Positioning and Travel Restraint SystemsASTM Standards
B117 Practice for Operating Salt Spray (Fog) Apparatus
F1891 Specification for Arc and Flame Resistant Rainwear
F1958/F1958M Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins
Keywords
adjustable positioning lanyard; body belts; climber; climbing equipment; dee-rings; harnesses; keeper; lanyards; length adjusting device; locking snaphook; positioning strap; stirrup ; shock absorbing lanyard; wood pole fall restriction device;
ICS Code
ICS Number Code 97.220.40 (Outdoor and water sports equipment)
DOI: 10.1520/F0887-97
ASTM International is a member of CrossRef.
