Security check
Please login to your personal account to use this feature.
Please login to your authorized staff account to use this feature.
Are you sure you want to empty the cart?
NFPA 2001: Standard on Clean Agent Fire Extinguishing Systems, 2015
- Chapter 1 Administration [Go to Page]
- 1.1 Scope
- 1.2 Purpose
- 1.3 Units
- 1.4 General Information
- 1.5 Safety
- 1.6 Environmental Factors
- 1.7 Retrofitability
- 1.8 Compatibility with Other Agents
- Chapter 2 Referenced Publications [Go to Page]
- 2.1 General
- 2.2 NFPA Publications
- 2.3 Other Publications
- 2.4 References for Extracts in Mandatory Sections
- Chapter 3 Definitions [Go to Page]
- 3.1 General
- 3.2 NFPA Official Definitions
- 3.3 General Definitions
- Chapter 4 Components [Go to Page]
- 4.1 Agent Supply
- 4.2 Distribution
- 4.3 Detection, Actuation, Alarm, and Control Systems
- Chapter 5 System Design [Go to Page]
- 5.1 Specifications, Plans, and Approvals
- 5.2 System Flow Calculations
- 5.3 Enclosure
- 5.4 Design Concentration Requirements
- 5.5 Total Flooding Quantity
- 5.6 Duration of Protection
- 5.7 Distribution System
- 5.8 Nozzle Choice and Location
- Chapter 6 Local Application Systems [Go to Page]
- 6.1 Description
- 6.2 Hazard Specifications
- 6.3 Clean Agent Requirements
- 6.4 Nozzles
- 6.5 Location and Number of Nozzles
- 6.6 Operation
- Chapter 7 Inspection, Testing, Maintenance, and Training [Go to Page]
- 7.1 Inspection and Tests
- 7.2 Container Test
- 7.3 Hose Test
- 7.4 Enclosure Inspection
- 7.5 Maintenance
- 7.6 Training
- 7.7 Approval of Installations
- 7.8 Safety
- Chapter 8 Marine Systems [Go to Page]
- 8.1 General
- 8.2 Use and Limitations
- 8.3 Hazards to Personnel
- 8.4 Agent Supply
- 8.5 Detection, Actuation, and Control Systems
- 8.6 Additional Requirements for Systems Protecting Class B Hazards Greater Than 6000 ft3 (170 m3) with Stored Cylinders Within the Protected Space
- 8.7 Enclosure
- 8.8 Design Concentration Requirements
- 8.9 Distribution System
- 8.10 Nozzle Choice and Location
- 8.11 Inspection and Tests
- 8.12 Approval of Installations
- 8.13 Periodic Puff Testing
- 8.14 Compliance
- Annex A Explanatory Material
- Annex B Cup Burner Method for Determining the Minimum Concentration of Gaseous Agent for Flame Extinguishment
- Annex C Enclosure Integrity Procedure
- Annex D Enclosure Evaluation
- Annex E Informational References
- Index [Go to Page]
