eLibrary >
BS EN ISO 8311:2013 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Calibration of membrane tanks and independent prismatic tanks in ships. Manual and internal electro-optical distance-ranging methods >
Expand All
TOC Search:
BS EN ISO 8311:2013 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Calibration of membrane tanks and independent prismatic tanks in ships. Manual and internal electro-optical distance-ranging methods, 2013
- Contents Page
- Foreword
- Section sec_1
- Section sec_2
- Section sec_3
- Section sec_3.1
- Section sec_3.2
- Section sec_3.3
- Section sec_3.4
- Section sec_3.5
- Section sec_3.6
- Section sec_3.7
- Section sec_3.8
- Section sec_3.9
- Section sec_3.10
- Section sec_3.11
- Section sec_3.12
- Section sec_3.13
- Section sec_3.14
- Section sec_3.15
- Section sec_3.16
- Section sec_3.17
- Section sec_3.18
- Section sec_3.19
- Section sec_3.20
- Section sec_3.21
- Section sec_4
- Section sec_4.1
- Section sec_4.2
- Section sec_4.3
- Section sec_4.4
- Section sec_4.5
- Section sec_4.6
- Section sec_4.7
- Section sec_4.8
- Section sec_5
- Section sec_5.1
- Section sec_5.2
- Section sec_5.3
- Section sec_5.4
- Section sec_5.5
- Section sec_5.6
- Section sec_6
- Section sec_7
- Section sec_7.1
- Section sec_7.2
- Section sec_7.2.1
- Section sec_7.2.2
- Section sec_7.2.3
- Table tab_d
- Figure fig_1
- Section sec_7.2.4
- Section sec_7.3
- Section sec_7.3.1
- Section sec_7.3.2
- Section sec_7.3.3
- Table tab_g
- Figure fig_2
- Section sec_7.3.4
- Table tab_h
- Figure fig_3
- Table tab_i
- Figure fig_4
- Section sec_7.4
- Section sec_7.4.1
- Section sec_7.4.2
- Section sec_7.4.3
- Section sec_7.4.4
- Table tab_m
- Figure fig_5
- Section sec_7.5
- Section sec_7.5.1
- Section sec_7.5.2
- Section sec_7.5.3
- Section sec_7.5.4
- Section sec_7.5.5
- Table tab_n
- Figure fig_6
- Section sec_7.6
- Section sec_8
- Section sec_8.1
- Section sec_8.2
- Section sec_8.3
- Section sec_8.3.1
- Table tab_p
- Figure fig_7
- Section sec_8.3.2
- Section sec_8.3.3
- Section sec_8.3.4
- Section sec_9
- Section sec_9.1
- Section sec_9.2
- Section sec_9.2.1
- Section sec_9.2.2
- Section sec_9.2.3
- Section sec_9.2.4
- Section sec_10
- Section sec_10.1
- Figure fig_8
- Section sec_10.2
- Section sec_10.3
- Section sec_10.4
- Section sec_10.4.1
- Section sec_10.4.2
- Section sec_10.4.3
- Section sec_10.5
- Section sec_10.6
- Section sec_10.7
- Section sec_10.8
- Section sec_11
- Section sec_12
- Annex sec_A
- Annex sec_A.1
- Annex sec_A.2
- Annex sec_A.3
- Annex sec_A.4
- Figure fig_A.1
- Annex sec_A.5
- Annex sec_A.6
- Annex sec_A.7
- Annex sec_A.7.1
- Annex sec_A.7.2
- Annex sec_A.7.2.1
- Annex sec_A.7.2.2
- Annex sec_A.7.2.3
- Annex sec_A.7.3
- Annex sec_A.7.3.1
- Annex sec_A.7.3.2
- Annex sec_A.7.3.3
- Annex sec_A.7.4
- Annex sec_A.7.5
- Annex sec_A.7.5.1
- Annex sec_A.7.5.2
- Annex sec_A.7.5.3
- Annex sec_A.7.6
- Table tab_A.1
- Annex sec_A.7.7
- Annex sec_A.7.7.1
- Annex sec_A.7.7.2
- Annex sec_A.7.7.3
- Annex sec_A.7.7.4
- Annex sec_A.7.7.5
- Annex sec_A.7.7.6
- Annex sec_A.7.7.7
- Annex sec_A.7.8
- Annex sec_A.7.8.1
- Annex sec_A.7.8.2
- Annex sec_A.7.8.3
- Annex sec_A.7.8.4
- Annex sec_A.7.8.5
- Annex sec_A.7.8.6
- Annex sec_A.8
- Table tab_A.2
- Table tab_A.3
- Table tab_A.4
- Table tab_A.5
- Table tab_A.6
- Annex sec_A.9
- Annex sec_B
- Annex sec_C
- Annex sec_D
- Reference ref_1
- Reference ref_2
- Reference ref_3
- Reference ref_4
- Reference ref_5
- Reference ref_6
- Reference ref_7
- Reference ref_8
- Reference ref_9
- Annex C (informative) Example of trim correction table (Tank No. 1)
- Annex D (informative) Example of list correction table (Tank No. 1)
- Bibliography
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Precautions
- 4.1 General
- 4.2 Ship’s condition during calibration
- 4.3 Tank distortion
- 4.4 Comparison with drawings
- 4.5 Measurements by measuring tape
- 4.6 Measurements by electro-optical distance-ranging (EODR) instrument
- 4.7 Condition of membrane
- 4.8 Safety precautions for work in membrane tanks
- 5 Equipment
- 6 Determination of measuring points
- 7 Calibration by manual method
- 7.1 General
- 7.2 Tank length measurement
- 7.3 Tank width measurement
- 7.4 Tank height measurement
- 7.5 Measurement of bottom undulation and gauge reference height
- 7.6 Correction for temperature
- 8 Calibration by electro-optical distance-ranging (EODR) method
- 8.1 General
- 8.2 Setting up of EODR instrument
- 8.3 Calibration procedure
- 9 Additional measurements
- 9.1 Location of level gauge
- 9.2 Deadwood
- 10 Calculation
- 10.1 General
- 10.2 Calculation of tank volume
- 10.3 Effect of bottom undulation
- 10.4 Area of chamfer portion
- 10.5 Trim corrections
- 10.6 List corrections
- 10.7 Combined trim and list corrections
- 10.8 Correction for tank shell expansion or contraction
- 11 Report and tables
- 12 Recalibration
- Annex A (informative) Uncertainty associated with tank calibration
- Annex B (informative) Example of tank capacity table (Tank No.3)
- Annex C (informative) Example of trim correction table (Tank No. 1)
- Annex D (informative) Example of list correction table (Tank No. 1)
- Bibliography [Go to Page]